In this study, a method was suggested to produce dried powder from red mud (RM) sludge with 40%-60% water content without heating. The RM sludge is discharged from the Bayer process, which is used to produce alumina from bauxite ores. Nonthermally treated RM (NTRM) powder was produced by mixing RM s...
In this study, a method was suggested to produce dried powder from red mud (RM) sludge with 40%-60% water content without heating. The RM sludge is discharged from the Bayer process, which is used to produce alumina from bauxite ores. Nonthermally treated RM (NTRM) powder was produced by mixing RM sludge (50%), paper sludge ash (PSA, 35%), and high-calcium fly ash (HCFA, 15%). The physicochemical properties of NTRM were investigated by analyzing its water content, X-ray fluorescence spectra, X-ray diffraction patterns, and particle size. Moreover, to examine the applicability of NTRM as a construction material, slag cement mortar in which 20 wt% of the binder was replaced with NTRM was produced, and the compressive strength, porosity, and water absorption rate of the mortar were evaluated. Results indicated that NTRM of acceptable quality was produced when the water content in RM sludge decreased and CaO contained in PSA and HCFA reacted with moisture and formed portlandite. The NTRM-mixed mortar requires further examination in terms of durability because of the increased capillary voids and high water absorption rate, but its compressive strength is sufficient to enable its use in sidewalks, bike roads, and parking lots.
In this study, a method was suggested to produce dried powder from red mud (RM) sludge with 40%-60% water content without heating. The RM sludge is discharged from the Bayer process, which is used to produce alumina from bauxite ores. Nonthermally treated RM (NTRM) powder was produced by mixing RM sludge (50%), paper sludge ash (PSA, 35%), and high-calcium fly ash (HCFA, 15%). The physicochemical properties of NTRM were investigated by analyzing its water content, X-ray fluorescence spectra, X-ray diffraction patterns, and particle size. Moreover, to examine the applicability of NTRM as a construction material, slag cement mortar in which 20 wt% of the binder was replaced with NTRM was produced, and the compressive strength, porosity, and water absorption rate of the mortar were evaluated. Results indicated that NTRM of acceptable quality was produced when the water content in RM sludge decreased and CaO contained in PSA and HCFA reacted with moisture and formed portlandite. The NTRM-mixed mortar requires further examination in terms of durability because of the increased capillary voids and high water absorption rate, but its compressive strength is sufficient to enable its use in sidewalks, bike roads, and parking lots.
참고문헌 (33)
Alam Characterization of Coarse Fraction of Red Mud as a Civil Engineering Construction Material J. Clean. Prod. 2017 10.1016/j.jclepro.2017.08.210 168 679
Mymrin Environmentally Clean Ceramics from Printed Circuit Board Sludge, Red Mud of Bauxite Treatment and Steel Slag J. Clean. Prod. 2017 10.1016/j.jclepro.2017.06.230 164 831
Li Novel Application of Red Mud: Facile Hydrothermal-Thermal Conversion Synthesis of Hierarchical Porous AlOOH and Al2O3 Microspheres as Adsorbents for Dye Removal Chem. Eng. J. 2017 10.1016/j.cej.2017.03.135 321 622
Kim Synthesis of Structural Binder for Red Brick Production Based on Red Mud and Fly Ash Activated Using Ca(OH)2 and Na2CO3 Constr. Build. Mater. 2017 10.1016/j.conbuildmat.2017.04.171 147 101
Senff Effect of Red Mud Addition on the Rheological Behaviour and on Hardened State Characteristics of Cement Mortars Constr. Build. Mater. 2011 10.1016/j.conbuildmat.2010.06.043 25 163
Villarejo Manufacturing New Ceramic Materials from Clay and Red Mud Derived from the Aluminium Industry Constr. Build. Mater. 2012 10.1016/j.conbuildmat.2012.04.133 35 656
Geng Comparison of Red Mud and Coal Gangue Blended Geopolymers Synthesized through Thermal Activation and Mechanical Grinding Preactivation Constr. Build. Mater. 2017 10.1016/j.conbuildmat.2017.07.045 153 185
Somlai Dependence of Radon Emanation of Red Mud Bauxite Processing Wastes on Heat Treatment J. Hazard. Mater. 2009 10.1016/j.jhazmat.2009.07.131 172 1258
Yang Development of Unsintered Construction Materials from Red Mud Wastes Produced in the Sintering Alumina Process Constr. Build. Mater. 2008 10.1016/j.conbuildmat.2007.10.005 22 2299
Kang Effects of Red Mud and Alkali-Activated Slag Cement on Efflorescence in Cement Mortar Constr. Build. Mater. 2017 10.1016/j.conbuildmat.2016.12.123 133 459
Krivenko Development of Alkali Activated Cements and Concrete Mixture Design with High Volumes of Red Mud Constr. Build. Mater. 2017 10.1016/j.conbuildmat.2017.06.031 151 819
Kim Effect of Red Mud Content on Strength and Efflorescence in Pavement Using Alkali-Activated Slag Cement Int. J. Concr. Struct. Mater. 2018 10.1186/s40069-018-0258-3 12 18
(2009). ISO 679: 2009: Cement-Test methods-Determination of Strength, International Organisation for Standardisation.
(2005). ASTM C 349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure), Annual Book of ASTM.
(2008). KS F 2609 Determination of the Water Absorption Coefficient of Building Materials.
Fujii Impact of Superplasticizer on the Hardening of Slag Portland Cement Blended with Red Mud Constr. Build. Mater. 2015 10.1016/j.conbuildmat.2015.10.057 101 432
Senff Influence of Red Mud Addition on Rheological Behavior and Hardened Properties of Mortars Constr. Build. Mater. 2014 10.1016/j.conbuildmat.2014.04.104 65 84
Guo Novel Glass Ceramic Foams Materials Based on Red Mud Ceram. Int. 2014 10.1016/j.ceramint.2013.11.128 40 6677
Singh Preparation of Special Cements from Red Mud Waste Manag. 1996 10.1016/S0956-053X(97)00004-4 16 665
Lee A Study on the Strength and Flowing Properties of the Non-Cement Inorganic Composite by Using Blast Furnace Slag and Red Mud Adv. Mater. Res. 2011 10.4028/www.scientific.net/AMR.261-263.491 261-263 491
Yao Characterization on a Cementitious Material Composed of Red Mud and Coal Industry Byproducts Constr. Build. Mater. 2013 10.1016/j.conbuildmat.2013.05.030 47 496
Yang The Relationship between Pore Structure and Chloride Diffusivity from Ponding Test in Cement-Based Materials Mater. Chem. Phys. 2006 10.1016/j.matchemphys.2005.12.032 100 203
Mehta, P.K., and Monteiro, P.J.M. (2006). Concrete: Microstructure, Properties, and Materials, McGraw-Hill.
Zhang Evaluation of Relationship between Water Absorption and Durability of Concrete Materials Adv. Mater. Sci. Eng. 2014 10.1155/2014/650373 2014 650373
※ AI-Helper는 부적절한 답변을 할 수 있습니다.