최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials science & engineering. properties, microstructure and processing. A, Structural materials, v.768, 2019년, pp.138449 -
Kim, DaeHan (Department of Materials Science and Engineering, Tokyo Institute of Technology) , Kim, JaeHwang (Carbon and Light Materials Application Group, Korea Institute of Industrial Technology) , Kobayashi, Equo (Department of Materials Science and Engineering, Tokyo Institute of Technology)
Abstract A three-dimensional (3D) microstructure of Fe-intermetallic compounds (Fe-IMCs) was analyzed by means of x-ray tomography. 3D images were obtained to understand the internal structure of the Fe-IMCs in Al-Si-Mg-Fe alloys. A needle-shaped β phase appears in two-dimensional (2D) observa...
Mater. Trans. Zhang 54 8 1484 2013 10.2320/matertrans.F-M2013808 Effects of the Mn/Fe ratio and cooling rate on the modification of Fe intermetallic compounds in cast A356 based alloy with different Fe contents
Mater. Trans. Osawa 48 9 2467 2007 10.2320/matertrans.F-MRA2007874 Morphology of intermetallic compounds in Al-Si-Fe alloy and its control by ultrasonic vibration
J. Alloy. Comp. Taghaddos 468 539 2009 10.1016/j.jallcom.2008.01.079 Effect of iron-intermetallics on the fluidity of 413 aluminum alloy
Mater. Trans. Phongphisutthinan 53 5 885 2012 10.2320/matertrans.MBW201121 Caliber rolling process and mechanical properties of high Fe-containing Al-Mg-Si alloys
Metall. Trans. A Gustafsson 17 A 45 1986 10.1007/BF02644441 The influence of Fe and Cr on the microstructure of cast Al-Si-Mg alloys
Scr. Mater. Dinnis 53 955 2005 10.1016/j.scriptamat.2005.06.028 As-cast morphology of iron-intermetallics in Al-Si foundry alloys
Mater. Sci. Eng. A Kobayashi 286 333 2000 10.1016/S0921-5093(00)00935-7 Strength and fracture of aluminum alloys
Solid State Phenom. Sato 116-117 247 2006 10.4028/www.scientific.net/SSP.116-117.247 A new deformation-semi-solid casting process of highly concentrated Fe containing Al-Si-Cu-Fe cast alloys
Mater. Trans. Cao 47 5 1303 2006 10.2320/matertrans.47.1303 Morphology of β-Al5FeSi phase in Al-Si cast alloys
Mater. Sci. Eng. A Sreeja Kumari 460-461 561 2007 10.1016/j.msea.2007.01.082 Effects of individual and combined additions of Be, Mn, Ca and Sr on the solidification behaviour, structure and mechanical properties of Al-7Si-0.3Mg-0.8Fe alloy
Mater. Trans. Umezawa 46 12 2609 2005 10.2320/matertrans.46.2609 Microstructural refinement of hyper-eutectic Al-Si-Fe-Mn cast alloys to produce a recyclable wrought material
Mater. Sci. Forum Aoki 794-496 1109 2014 10.4028/www.scientific.net/MSF.794-796.1109 Microstructure and mechanical properties of D-SSF processed Al-Zn-Mg alloys with high Fe content
J. Nanosci. Nanotechnol. Kim 18 2137 2018 10.1166/jnn.2018.14980 Effects of fragmented Fe intermetallic compounds on ductility in Al-Si-Mg alloys
Carl Zeiss X-ray Microscopy
Scr. Mater. Zhao 146 321 2018 10.1016/j.scriptamat.2017.12.010 3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation
J. Alloy. Comp. Zhao 777 1054 2019 10.1016/j.jallcom.2018.10.334 Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys
Sci. Rep. Backeberg 7 1-12 2017 Quantifying the anisotropy and tortuosity of permeable pathways in clay-rich mudstones using models based on X-ray tomography
Chem. Eng. Sci. Taiwo 154 27 2016 10.1016/j.ces.2016.04.023 The use of contrast enhancement techniques in X-ray imaging of lithium-ion battery electrodes
Procedia Mater. Sci. Taylor 1 19 2012 10.1016/j.mspro.2012.06.004 Iron-containing intermetallic phases in Al-Si based casting alloys
Metall. Mater. Trans. B Tuncay 48 794 2017 10.1007/s11663-016-0909-1 The effect of iron content on microstructure and mechanical properties of A356 cast alloy
Metall. Mater. Trans. A Liu 40 2457 2009 10.1007/s11661-009-9944-8 Precipitation of β-Al5FeSi Phase platelets in Al-Si based casting alloys
J. Korea Foundry Soc. Kim 29 1 27 2009 10.18284/jss.2009.06.28.1.27 Effects of Mn , Cr , and Sr additions on the microstructure and tensile properties of Al-7Si-0.4Mg-1Fe casting alloy
Arch. Foundry Eng. Mikołajczak 13 4 79 2013 10.2478/afe-2013-0086 X-ray tomography investigation of Fe-rich intermetallics in AlSi alloys
Arch. Foundry Eng. Mikołajczak 15 1 47 2015 10.1515/afe-2015-0010 Three dimensional morphology of β-Al5FeSi intermetallics in AlSi alloys
Procedia Struct. Integr. Bacaicoa 2 2269 2016 10.1016/j.prostr.2016.06.284 3D Morphology of Al5FeSi inclusions in high Fe-content Al-Si-Cu Alloys
Mater. Sci. Eng. A Shabestari 383 289 2004 10.1016/S0921-5093(04)00832-9 The effect of iron and manganese on the formation of intermetallic compounds in aluminum-silicon alloys
J. Kor. Inst. Kim 43 6 413 2005 Effects of Mn on the crystallization of α-Al(Fe, Mn)Si phase in A356 alloys
Proc. ICAA-6 Kobayashi 1 127 1998 Fracture characteristics of aluminum casting alloys
Metall. Sci. Technol. Seifeddine 27 11 2009 The influence of Fe and Mn content and cooling rate on the microstructure and mechanical properties of A380-die casting alloys
Mater. Sci. Eng. A Ma 490 36 2008 10.1016/j.msea.2008.01.028 A study of tensile properties in Al-Si-Cu and Al-Si-Mg alloys: effect of β-iron intermetallics and porosity
Acta Mater. Caceres 44 1 25 1996 10.1016/1359-6454(95)00172-8 Damage by the cracking of silicon particles in an Al-7Si-0.4Mg casting alloy
Metall. Mater. Trans. A Wang 34A 2901 2003 10.1007/s11661-003-0190-1 Damage by eutectic particle cracking in aluminum casting alloys A356/357
J. Mater. Sci. Technol. Chen 30 2 139 2014 10.1016/j.jmst.2013.04.014 In-situ observation of tensile fracture in A357 casting alloys
A. Bjurenstedt, E. Ghassemali, S. Seifeddine and A.K. Dahle, “The effects of Fe-rich intermetallics on crack initiation in cast aluminum: an in-situ tensile study,” Mat. Sci. Eng. A, https://doi.org/10.1016/j.mesa.2018.07.04.
Askeland 2014 Essentials of Materials Science and Engineering
Lampman vol. 19 1996
Scr. Mater. Garcia-Infanta 58 138 2008 10.1016/j.scriptamat.2007.09.018 Effect of the deformation path on the ductility of a hypoeutectic Al-Si casting alloy subjected to equal-channel angular pressing by routes A, BA, BC and C
Mater. Sci. Eng. A Wang 241 72 1998 10.1016/S0921-5093(97)00476-0 The fracture mode in Al-Si-Mg casting alloys
Mater. Des. Ceschini 36 522 2012 10.1016/j.matdes.2011.11.047 Effect of Fe content and microstructural features on the tensile and fatigue properties of the Al-Si10-Cu2 alloy
Mater. Des. Samuel 53 938 2014 10.1016/j.matdes.2013.07.021 Relationship between tensile and impact properties in Al-Si-Cu-Mg cast alloys and their fracture mechanisms
Acta Mater. Terzi 58 5370 2010 10.1016/j.actamat.2010.06.012 In situ study of nucleation and growth of the irregular α-Al/β-Al5FeSi eutectic by 3-D synchrotron X-ray microtomography
Acta Mater. Puncreobutr 79 292 2014 10.1016/j.actamat.2014.07.018 In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification
J. Alloy. Comp. Singh 602 163 2014 10.1016/j.jallcom.2014.03.010 3D microstructural characterization and mechanical properties of constituent particles in Al 7075 alloys using X-ray synchrotron tomography and nanoindentation
Intermetallics Singh 62 69 2015 10.1016/j.intermet.2015.03.008 Mechanical properties of intermetallic inclusions in Al 7075 alloys by micropillar compression
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.