최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials characterization, v.158, 2019년, pp.109959 -
Trudonoshyn, O. (Corresponding author.) , Rehm, S. , Randelzhofer, P. , Körner, С.
Abstract The microstructure and mechanical properties of the high-pressure die casting alloys Al-5.7Mg-2.6Si-0.7Mn-xZn in as-cast condition have been investigated. The microstructure was studied by scanning electron microscopy (SEM), electron probe microanalysis (EPMA) and transmission electron mic...
European Aluminium Association 2016 Aluminum Content in Cars. Summary Report
Light Met. Alloy Davis 351 2001 Aluminum and aluminum alloys
Hatch 1984 Aluminum Properties and Physical Metallurgy
giesserei Leis 94 48 2007 Druckguss (43. Folge) teil 1: werkstoffe
Hielscher 1996 Light Met. 1996 Proc. Tech. Sess. Present. By TMS Light Met. Comm. 125th TMS Annu. Meet Magsimal-59, an AlMgMnSi-type squeeze-casting alloy designed for temper F
Rheinfelden Alloys GmbH & Co KG 2017 Ductile Aluminum Alloys for Automotive Structural Applications
Mondolfo 1979 Aluminum Alloys : Structure and Properties
Mater. Eng. - Mater. Inžinierstvo. Prach 24 11 2017 Effects of chemical composition on mechanical properties of Al-Mg-Si-Mn based alloys
Mater. Tehnol. Trudonoshyn 50 2016 10.17222/mit.2014.295 Use of the ABI technique to measure the mechanical properties of Aluminium alloys: effect of heat-treatment conditions on the mechanical properties of alloys
Mater. Sci. Eng. A Lodgaard 283 144 2000 10.1016/S0921-5093(00)00734-6 Precipitation of dispersoids containing Mn and/or Cr in Al - Mg - Si alloys
Mater. Trans. Matsuda 52 229 2011 10.2320/matertrans.M2010370 Effect of TM-addition on the aging behaviour of Al-Mg-Si alloys
Philos. Mag. Saito 94 2410 2014 10.1080/14786435.2014.913819 The effect of Zn on precipitation in Al - Mg - Si alloys
Arch. Metall. Mater. Li 57 457 2012 10.2478/v10172-012-0047-y Effect of minor Cu addition on the precipitation sequence of an as-cast Al-Mg-Si 6005 alloy
Philos. Mag. Van Helvoort 87 3385 2007 10.1080/14786430701287377 The effect of Cu on precipitation in Al-Mg-Si alloys
Prog. Mater. Sci. Chakrabarti 49 389 2004 10.1016/S0079-6425(03)00031-8 Phase relations and precipitation in Al-Mg-Si alloys with Cu additions
M 2003 Handbook of Aluminum
Mater. Sci. Forum Ji 765 23 2013 10.4028/www.scientific.net/MSF.765.23 Effect of Ti addition on mechanical properties of high pressure die cast Al-Mg-Si alloys
Met. Mater. Litynska-Dobrzynska 48 9 2010 Structure and Properties of Al-Mg-Si alloys with Zr and Sc additions produced by melt spinning and twin rolling Casting Techniques
Arch. Metall. Mater. Lityńska-Dobrzyńska 51 555 2006 Effect of heat treatment on the sequence of phases formation in Al-Mg-Si alloy with Sc and Zr additions
Mater. Sci. Eng. A Prach 759 603 2019 10.1016/j.msea.2019.05.038 Effect of Zr, Cr and Sc on the Al-Mg-Si-Mn high-pressure die casting alloys
Acta Mater. Knipling 58 5184 2010 10.1016/j.actamat.2010.05.054 Precipitation evolution in Al-0.1Sc, Al-0.1Zr and Al-0.1Sc-0.1Zr (at.%) alloys during isochronal aging
Metall. Sci. Technol. Royset 25 11 2007 Scandium in Aluminium alloys overview: physical metallurgy, properties and applications
J. Alloy. Comp. Patakham 542 177 2012 10.1016/j.jallcom.2012.07.018 Grain refinement mechanism in an Al-Si-Mg alloy with scandium
Heliyon Trudonoshyn 5 2019 10.1016/j.heliyon.2019.e01202 Multistep nucleation and multi-modification effect of Sc in hypoeutectic Al-Mg-Si alloys
Acta Mater. Berg 49 3443 2001 10.1016/S1359-6454(01)00251-8 GP-zones in Al-Zn-Mg alloys and their role in artificial aging
Acta Mater. Wolverton 49 3129 2001 10.1016/S1359-6454(01)00229-4 Crystal structure and stability of complex precipitate phases in Al-Cu-Mg-(Si) and Al-Zn-Mg alloys
Acta Mater. Sha 52 4503 2004 10.1016/j.actamat.2004.06.025 Early-stage precipitation in Al-Zn -Mg-Cu alloy (7050)
J. Alloy. Comp. Chinh 378 52 2004 10.1016/j.jallcom.2003.11.175 The effect of Cu on mechanical and precipitation properties of Al -Zn-Mg alloys
Int. J. Miner. Metall. Mater. Cai 20 659 2013 10.1007/s12613-013-0780-x Microstructural characteristics and aging response of Zn-containing Al-Mg-Si-Cu alloy
Mater. Char. Wang 134 123 2017 10.1016/j.matchar.2017.10.012 Effect of Zn on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles
Mater. Des. Ding 65 1229 2015 10.1016/j.matdes.2014.09.086 The effect of Zn on the age hardening response in an Al-Mg-Si alloy
Metall. Mater. Trans. A Li 49 3247 2018 10.1007/s11661-018-4684-2 Effect of Zn concentration on the microstructure and mechanical properties of Al-Mg-Si-Zn alloys processed by gravity die casting
Mater. Chem. Phys. Yan 1 2015 Effect of solutionising and ageing on the microstructure and mechanical properties of a high strength die-cast Al-Mg-Zn-Si alloy
Mater. Sci. Eng. A Ji 626 165 2015 10.1016/j.msea.2014.12.019 Development of a high strength Al-Mg2Si-Mg-Zn based alloy for high pressure die casting
Rehm 2019 Effect of Zn Content on the Structural Changes in the Base Alloy Al-5,7Mg-2,6Si-Mn in the As-Cast State and after Solution Treatment
J. Phase Equilibria Diffusion Raghavan 31 293 2010 10.1007/s11669-010-9684-x Al-Mg-Zn (Aluminum-Magnesium-Zinc)
Thermochim. Acta Liang 314 87 2002 10.1016/S0040-6031(97)00458-9 Experimental investigation and thermodynamic calculation of the Al-Mg-Zn system
J. Phase Equilibria Diffusion Raghavan 32 72 2011 10.1007/s11669-010-9803-8 Al-Mg-Si-Zn (aluminum-magnesium-silicon-zinc)
Prog. Mater. Sci. Nadella 53 421 2008 10.1016/j.pmatsci.2007.10.001 Macrosegregation in direct-chill casting of Aluminium alloys
Kumar 165 2000 Light Met. Syst. Part 3 Aluminium - magnesium - silicon
Int. J. Cast Met. Res. Timelli 26 239 2013 10.1179/1743133613Y.0000000061 Effects of chromium and bismuth on secondary Aluminium foundry alloys
J. Mater. Sci. Samuel 30 1698 1995 10.1007/BF00351598 Effect of alloying elements and dendrite arm spacing on the microstructure and hardness of an Al-Si-Cu-Mg-Fe-Mn (380) Aluminium die-casting alloy
Metall. Mater. Trans. B Process Metall. Mater. Process. Sci. Ferraro 46 1022 2015 10.1007/s11663-014-0260-3 Influence of sludge particles on the tensile properties of die-cast secondary aluminum alloys
J. Mater. Process. Technol. Outmani 249 559 2017 10.1016/j.jmatprotec.2017.06.043 Effect of Si, Cu and processing parameters on Al-Si-Cu HPDC castings
Metall. Mater. Trans. A Phys. Metall. Mater. Sci. Marioara 36 691 2005 The influence of alloy composition on precipitates of the Al-Mg-Si system
Mater. Sci. Eng. A Ding 627 119 2015 10.1016/j.msea.2014.12.086 The natural aging and precipitation hardening behaviour of Al-Mg-Si-Cu alloys with different Mg/Si ratios and Cu additions
Mater. Trans. Shimosaka 52 920 2011 10.2320/matertrans.L-MZ201125 Effect of cooling rates during solidification of Al-5.5%Mg-2.3%Si-0.6%Mn and Al-13%Mg2Si pseudo-binary alloys on their secondary-particle morphology and tear toughness
ISRN Metall. Mukhopadhyay 2012 1 2012 10.5402/2012/165082 Alloy designation, processing, and use of AA6XXX series Aluminium alloys
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.