참고문헌 (53)

1. Mater. Sci. Eng., A Zhao 738 295 2018 10.1016/j.msea.2018.09.081 Ultrahigh stability and strong precipitation strengthening of nanosized NbC in alumina-forming austenitic stainless steels subjecting to long-term high temperature exposure 

   상세보기

2. Sci. Rep. Zhang 3 1327 2013 10.1038/srep01327 A nanoscale co-precipitation approach for property enhancement of Fe-base alloys 

   상세보기

3. J. Miner. Mater. Char. Eng. Halfa 2 428 2014 Recent trends in producing ultrafine grained steels 

4. J. Nucl. Mater. Terada 358 40 2006 10.1016/j.jnucmat.2006.06.010 Microstructure and intergranular corrosion of the austenitic stainless steel 1.4970 

   상세보기

5. Mater. Sci. Eng., A Chauhan 658 123 2016 10.1016/j.msea.2016.01.109 Study of the deformation and damage mechanisms of a 9Cr-ODS steel: microstructure evolution and fracture characteristics 

   상세보기

6. Scripta Metall. Bloom 10 303 1976 10.1016/0036-9748(76)90081-8 Austenitic stainless steels with improved resistance to radiation-induced swelling 

   상세보기

7. J. Nucl. Mater. Kesternich 103 845 1981 10.1016/0022-3115(82)90705-X Reduction of helium embrittlement in stainless steel by finely dispersed TiC precipitates 

   상세보기

8. Sci. Rep. Hu 5 11772 2015 10.1038/srep11772 Nano-sized superlattice clusters created by oxygen ordering in mechanically alloyed Fe alloys 

   상세보기

9. Mater. Today Jiao 20 3 142 2017 10.1016/j.mattod.2016.07.002 Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era 

   상세보기

10. J. Cryst. Growth Van Landeghem 341 53 2012 10.1016/j.jcrysgro.2011.12.056 Nitride precipitation in compositionally heterogeneous alloys: nucleation, growth and coarsening during nitriding 

    상세보기

11. Mater. Sci. Eng., A Li 654 203 2016 10.1016/j.msea.2015.12.032 Effect of fabrication processing on the microstructure and mechanical properties of oxide dispersion strengthening steels 

    상세보기

12. Mater. Sci. Eng. R Lo 65 39 2009 10.1016/j.mser.2009.03.001 Recent developments in stainless steels 

    상세보기

13. J. Mater. Eng. Perform. Viswanathan 10 81 2001 10.1361/105994901770345394 Materials for ultrasupercritical coal power plants-boiler materials: Part 1 

    상세보기

14. Metall. Trans. Weiss 3 851 1972 10.1007/BF02647659 Phase instabilities during high temperature exposure of 316 austenitic stainless steel 

    상세보기

15. Acta Mater. Kumar 113 230 2016 10.1016/j.actamat.2016.05.007 Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation 

    상세보기

16. Mater. A. T. High. Temp. Purzyńska 36 296 2019 10.1080/09603409.2018.1546919 Precipitation study in Ti-stabilised austenitic stainless steel after 207,000 h of service 

    상세보기

17. Mater. Sci. Eng., A He 708 248 2017 10.1016/j.msea.2017.09.103 Effect of carbide precipitation on strain-hardening behavior and deformation mechanism of metastable austenitic stainless steel after repetitive cold rolling and reversion annealing 

    상세보기

18. ISIJ Int. Matsuda 62 1209 1976 Effect of dispersion state of TiN on the austenite grain size of low-carbon low alloy 

19. Mater. Sci. Technol. Itman 13 49 1997 10.1179/mst.1997.13.1.49 Quantitative study of carbonitride precipitation in niobium and titanium microalloyed hot strip steel 

    상세보기

20. Iron Steel Int. Li 29 158 1989 10.2355/isijinternational.29.158 Effect of TiN inclusion on fracture toughness in ultrahigh strength steel 

    상세보기

21. Metall. Mater. Trans. Zhang 30A 2089 1999 10.1007/s11661-999-0019-7 Effect of TiN particles and microstructure on fracture toughness in simulated heat-affected zones of a structural steel 

    상세보기

22. Mater. Sci. Eng., A Wang 145 87 1991 10.1016/0921-5093(91)90298-2 The effect of titanium and nitrogen contents on the microstructure and mechanical properties of plain carbon steels 

    상세보기

23. ISIJ Int. Medina 39 930 1999 10.2355/isijinternational.39.930 Influence of Ti an N contents on austenite grain control and precipitate size in structural steels 

    상세보기

24. Acta Mater. Maalekian 60 1015 2012 10.1016/j.actamat.2011.11.016 In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel 

    상세보기

25. ISIJ Int. Lucia 39 84 1999 10.2355/isijinternational.39.84 Reassessment of the solubility of TiC and TiN in Fe 

    상세보기

26. Hulka 291 2000 High Temperature Thermomechanical Processing of Pipe Steel 

27. Met. Sci. Kurokawa 17 433 1983 10.1179/030634583790420628 Diffusion of Nb in Fe and Fe alloys 

    상세보기

28. Mater. Perform. Charact. Homsher 4 293 2015 10.1520/MPC20150002 Comparison of two physical simulation tests to determine the No-recrystallization temperature in hot rolled steel plates 

    상세보기

29. Mater. Sci. Technol. Perttula 14 626 1998 10.1179/mst.1998.14.7.626 Recrystallisation rates in austenite measured by double compression and stress relaxation methods 

    상세보기

30. J. Electron. Microsc. Tech. Malis 8 193 1988 10.1002/jemt.1060080206 EELS log‐ratio technique for specimen‐thickness measurement in the TEM 

    상세보기

31. Nat. Methods Schneider 9 671 2012 10.1038/nmeth.2089 NIH Image to ImageJ: 25 years of image analysis 

    상세보기

32. Metall. Mater. Trans. Shirdel 45 5185 2014 10.1007/s11661-014-2426-7 Microstructural evolution during normal/abnormal grain growth in austenitic stainless steel 

    상세보기

33. Mater. Char. Jafarian 114 88 2016 10.1016/j.matchar.2016.02.012 Characteristics of nano/ultrafine-grained austenitic TRIP steel fabricated by accumulative roll bonding and subsequent annealing 

    상세보기

34. Metals Odnobokova 5 656 2015 10.3390/met5020656 Development of nanocrystalline 304L stainless steel by large strain cold working 

    상세보기

35. J. Nucl. Mater. Duan 495 118 2017 10.1016/j.jnucmat.2017.08.014 The effect of the initial microstructure in terms of sink strength on the ion-irradiation-induced hardening of ODS alloys studied by nanoindentation 

    상세보기

36. Mater. Forum Yue 14 245 1990 The three critical temperatures of steel rolling and their experimental determination 

37. Z. Metallkd. Song 95 513 2004 10.3139/146.017983 Grain boundary characterization and grain size measurement in an ultrafine-grained steel 

    

38. Mater. Char. Salishchev 61 732 2010 10.1016/j.matchar.2010.04.005 Changes in misorientations of grain boundaries in titanium during deformation 

    상세보기

39. Mater. Char. Cruz-Gandarilla 118 332 2016 10.1016/j.matchar.2016.05.025 Microstructural evolution and mechanical properties on an ARB processed IF steel studied by X-ray diffraction and EBSD 

    상세보기

40. Metall. Rev. Jonas 130 1 1969 10.1179/095066069790138056 Strength and structure under hot-working conditions 

    

41. J. Mater. Sci. Technol. Zhou 31 235 2015 10.1016/j.jmst.2014.12.001 Phase transformation behavior and microstructural control of high-Cr martensitic/ferritic heat-resistant steels for power and nuclear plants: a Review 

    상세보기

42. Mater. Sci. Eng., A Schafler 410-411 169 2005 10.1016/j.msea.2005.08.070 Lattice defect investigation of ECAP-Cu by means of X-ray line profile analysis, calorimetry and electrical resistometry 

    상세보기

43. Int. Met. Rev. Pickering 211 227 1976 Physical metallurgy of stainless steel developments 

44. Acta Mater. Deschamps 47 281 1999 10.1016/S1359-6454(98)00293-6 Influence of predeformation on ageing in an Al-Zn-Mg alloy-I. Microstructure evolution and mechanical properties 

    상세보기

45. Metall. Mater. Trans. Marceau 41 1887 2010 10.1007/s11661-010-0252-0 Solute diffusion characteristics of a rapid hardening Al-Cu-Mg alloy during the early stages of age hardening 

    상세보기

46. Mater. Sci. Eng., A Song 528 7196 2011 10.1016/j.msea.2011.06.015 Solute diffusion during high- temperature plastic deformation in alloys 

    상세보기

47. Acta Mater. Dutta 49 785 2001 10.1016/S1359-6454(00)00389-X Modelling the kinetics of strain induced precipitation in Nb microalloyed steels 

    상세보기

48. 4 135 1979 

49. Mater. Sci. Eng., A Fujita 371 241 2004 10.1016/j.msea.2003.12.042 Using grain boundary engineering to evaluate the diffusion characteristics in ultrafine-grained Al-Mg and Al-Zn alloys 

    상세보기

50. Int. Mater. Rev. DeArdo 48 371 2003 10.1179/095066003225008833 Niobium in modern steels 

    상세보기

51. Mater. Sci. Eng., A Solenthaler 647 294 2015 10.1016/j.msea.2015.09.028 Precipitation strengthening of Nb-stabilized TP347 austenitic steel by a dispersion of secondary Nb(C,N) formed upon a short-term hardening heat treatment 

    상세보기

52. Acta Mater. Yazawa 52 3727 2004 10.1016/j.actamat.2004.04.027 Effect of matrix recrystallization on morphology, crystallography and coarsening behavior of vanadium carbide in austenite 

    상세보기

53. Acta Mater. Poddar 80 1 2014 10.1016/j.actamat.2014.07.035 Evolution of strain-induced precipitates in a model austenitic Fe-30Ni-Nb steel and their effect on the flow behavior 

    상세보기

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.