최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of controlled release : official journal of the Controlled Release Society, v.319, 2020년, pp.382 - 396
Rane, Yatish S. (Corresponding author.) , Marston, Jeremy O.
Abstract Transdermal drug delivery using spring-powered jet injection has been studied for several decades and continues to be highly sought after due to the advent of targeted needle-free techniques, especially for viscous and complex fluids. As such, this paper reports results from numerical simu...
10.1213/00000539-194701000-00050 Hingson, R. A. & Hughes, J. G. Clinical studies with jet injection; a new method of drug administration. Curr. Res. Anesth. Analg. 26, 221-30.
Bruce 2004 Needle-Free Jet Injection Bibliography, Device & Manufacturer Roster, and Patent List
Expert Rev. Med. Devices Baxter 3 565 2006 10.1586/17434440.3.5.565 Needle-free liquid jet injections: mechanisms and applications
Clin. Cosmet. Investig. Dermatol. Barolet 11 231 2018 10.2147/CCID.S162724 Current trends in needle-free jet injection: an update
IEEE Trans. Biomed. Eng. Baker 46 235 1999 10.1109/10.740886 Fluid mechanics analysis of a spring-loaded jet injector
Int. J. Pharm. Schoubben 491 91 2015 10.1016/j.ijpharm.2015.05.067 Dynamic behavior of a spring-powered micronozzle needle-free injector
Int. J. Pharm. Inoue 391 65 2010 10.1016/j.ijpharm.2010.02.019 Possibility and effectiveness of drug delivery to skin by needle-free injector
Wendell 2006 Proceedings of the 28th IEEE EMBS Annual International Conference The effect of jet parameters on jet injection
Lasers Surg. Med. Seok 48 624 2016 10.1002/lsm.22517 Investigating skin penetration depth and shape following needle-free injection at different pressures: a cadaveric study
Proc. Annu. Int. Conf. IEEE Eng. Med. Biol. Soc. EMBS Williams 2052 2012 A computational model of a controllable needle-free jet injector
Adv. Phys. Theor. Appl. Ogunti 34 60 2014 Fluid mechanics analysis of a voice coil needle free jet injector
Chem. Eng. Res. Des. Moradiafrapoli 117 110 2017 10.1016/j.cherd.2016.10.023 High-speed video investigation of jet dynamics from narrow orifices for needle-free injection
Nat. Rev. Drug Discov. Mitragotri 5 543 2006 10.1038/nrd2076 Current status and future prospects of needle-free liquid jet injectors
Pharm. Res. Schramm 19 1673 2002 10.1023/A:1020753329492 Transdermal drug delivery by jet injectors: energetics of jet formation and penetration
Nat. Rev. Immunol. Mitragotri 5 905 2005 10.1038/nri1728 Immunization without needles
Asian Pac. J. Trop. Biomed. Hasson 5 344 2015 10.1016/S2221-1691(15)30366-X The past, current and future trends in DNA vaccine immunisations
Nat. Rev. Drug Discov. Prausnitz 3 115 2004 10.1038/nrd1304 Current status and future potential of transdermal drug delivery
Vaccine Resik 33 307 2015 10.1016/j.vaccine.2014.11.025 Immune responses after fractional doses of inactivated poliovirus vaccine using newly developed intradermal jet injectors: a randomized controlled trial in Cuba
J. Control. Release Romgens 234 98 2016 10.1016/j.jconrel.2016.05.019 Penetration and delivery characteristics of repetitive microjet injection into the skin
Schramm-Baxter 4 3543 2004 26th Annu. Int. Conf. IEEE Eng. Med. Biol. Soc Investigations of needle-free jet injections
Adv. Drug Deliv. Rev. Mitragotri 65 100 2013 10.1016/j.addr.2012.07.016 Devices for overcoming biological barriers: the use of physical forces to disrupt the barriers
Int. J. Pharm. Sci. Res. Rahman 4 132 2013 Needle free injection systems
Vaccine Kis 30 523 2012 10.1016/j.vaccine.2011.11.020 Devices for intradermal vaccination
Annu. Rev. Biomed. Eng. Yarmush 16 295 2014 10.1146/annurev-bioeng-071813-104622 Electroporation-based technologies for medicine: principles, applications, and challenges
Int. J. Pharm. Investig. Ravi 5 192 2015 10.4103/2230-973X.167662 Needle free injection technology: a complete insight
AICHE J. Martanto 51 1599 2005 10.1002/aic.10424 Fluid dynamics in conically tapered microneedles
Office of Combination Products 2013 Guidance for Industry and FDA Staff: Technical Considerations for Pen, Jet, and Related Injectors Intended for Use with Drugs and Biological Products
Int. J. Phys. Sci. Chen 6 1552 2011 An experimental study and model validation of pressure in liquid needle-free injection
J. Control. Release Stachowiak 135 104 2009 10.1016/j.jconrel.2009.01.003 Dynamic control of needle-free jet injection
Biosyst. Eng. Grant 138 59 2015 10.1016/j.biosystemseng.2015.04.010 Effect of injection pressure and fluid volume and density on the jet dispersion pattern of needle-free injection devices
Comput. Biol. Med. Mohizin 101 61 2018 10.1016/j.compbiomed.2018.08.005 Computational fluid dynamics of impinging microjet for a needle-free skin scar treatment system
J. Med. Biol. Eng. Portaro 35 685 2015 10.1007/s40846-015-0075-y Experiments and modeling of air-powered needle-free liquid injectors
J. Control. Release Schramm-Baxter 97 527 2004 10.1016/j.jconrel.2004.04.006 Needle-free jet injections: dependence of jet penetration and dispersion in the skin on jet power
J. Pharm. Sci. Zeng 107 1086 2018 10.1016/j.xphs.2017.12.001 A mathematical model and experimental verification of optimal nozzle diameter in needle-free injection
J. Drug Deliv. Sci. Technol. Rohilla 53 2019 Characterization of jets for impulsively-started needle-free jet injectors: influence of fluid properties
J. Fluid Mech. Umemura 757 665 2014 10.1017/jfm.2014.511 Model for the initiation of atomization in a high-speed laminar liquid jet
Chem. Eng. J. Mccarthy 7 1 1974 10.1016/0300-9467(74)80021-3 Review of stability of liquid jets and the influence of nozzle design
J. Hydraul. Res. Rajaratnam 32 461 1994 10.1080/00221689409498746 An experimental study of very high velocity circular water jets in air
J. Control. Release Baxter 106 361 2005 10.1016/j.jconrel.2005.05.023 Jet-induced skin puncture and its impact on needle-free jet injections: experimental studies and a predictive model
J. Sci. Comput. Yakhot 1 3 1986 10.1007/BF01061452 Renormalization group analysis of turbulence. I. Basic theory
Phys. Fluids A Yakhot 4 1510 1992 10.1063/1.858424 Development of turbulence models for shear flows by a double expansion technique
J. Appl. Polym. Sci. Ghannam 64 289 1997 10.1002/(SICI)1097-4628(19970411)64:2<289::AID-APP9>3.0.CO;2-N Rheological properties of carboxymethyl cellulose
Colloid Polym. Sci. Benchabane 286 1173 2008 10.1007/s00396-008-1882-2 Rheological properties of carboxymethyl cellulose (CMC) solutions
J. Text. Eng. Yasuda 52 171 2006 10.4188/jte.52.171 A multi-mode viscosity model and its applicability to non-Newtonian fluids
Chem. Eng. Sci. Sousa 60 1859 2005 10.1016/j.ces.2004.11.035 Flow around individual Taylor bubbles rising in stagnant CMC solutions: PIV measurements
J. Biomech. Schramm-Baxter 37 1181 2004 10.1016/j.jbiomech.2003.12.006 Jet injection into polyacrylamide gels: investigation of jet injection mechanics
J. Exp. Bot. Richards 10 290 1959 10.1093/jxb/10.2.290 A flexible growth function for empirical use
Can. J. Chem. Eng. Dosunmu 93 929 2015 10.1002/cjce.22170 Pressure drop predictions for laminar pipe flow of carreau and modified power law fluids
Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. Ghassemieh 220 1739 2006 10.1243/0954406JMES430 The effect of nozzle geometry on the flow characteristics of small water jets
Fire Saf. J. Theobald 4 1 1981 10.1016/0379-7112(81)90002-3 The effect of nozzle design on the stability and performance of turbulent water jets
Text. Res. J. Begenir 74 178 2004 10.1177/004051750407400215 Effect of nozzle geometry on Hydroentangling water jets: experimental observations
Key Eng. Mater. Morgan 404 61 2009 10.4028/www.scientific.net/KEM.404.61 On the coherent length of fluid nozzles in grinding
CIRP Ann. - Manuf. Technol. Morgan 57 363 2008 10.1016/j.cirp.2008.03.090 Optimisation of fluid application in grinding
J. Fluids Eng. Trans. ASME Castillo 126 297 2004 10.1115/1.1758262 Separation criterion for turbulent boundary layers via similarity analysis
Exp. Thermal Fluid Sci. Deo 2007 10.1016/j.expthermflusci.2007.06.004 The influence of nozzle-exit geometric profile on statistical properties of a turbulent plane jet
Chem. Eng. Res. Des. Anantharamaiah 84 231 2006 10.1205/cherd.05077 Numerical simulation of the formation of constricted waterjets in hydroentangling nozzles: effects of nozzle geometry
Text. Res. J. Vahedi Tafreshi 74 359 2004 10.1177/004051750407400413 Simulating cavitation and hydraulic flip inside hydroentangling nozzles
J. Control. Release Simmons 307 200 2019 10.1016/j.jconrel.2019.06.032 Characterization of skin blebs from intradermal jet injection: ex-vivo studies
J. Vis. Kiyama 22 449 2019 10.1007/s12650-019-00547-8 Visualization of penetration of a high-speed focused microjet into gel and animal skin
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.