참고문헌 (17)

1. CIRP Journal of Manufacturing Science and Technology Shrivastava 9 159 2015 10.1016/j.cirpj.2014.10.001 Comparison of energy consumption and environmental impact of friction stir welding and gas metal arc welding for aluminum 

   상세보기

2. Materials & Design Rajakumar 32 2 535 2011 10.1016/j.matdes.2010.08.025 Influence of friction stir welding process and tool parameters on strength properties of AA7075-T 6 aluminium alloy joints 

   상세보기

3. Thomas, W.M., Nicholas, E.D., Needham, J.C., Murch, M.G., Templesmith, P. and Dawes, C.J., 1991, GB Patent application no. 9125978.8. International Patent Application No. PCT/GB92/02203. 

4. Transactions of Nonferrous Metals Society of China Sung-Ook 22 629 2012 10.1016/S1003-6326(12)61776-2 Influences of tool plunge speed and tool plunge depth on friction spot joining of AA5454-O aluminum alloy plates with different thicknesses 

   상세보기

5. Materials & Design Plaine 83 36 2015 10.1016/j.matdes.2015.05.082 The optimization of friction spot welding process parameters in AA6181-T4 and Ti6Al4V dissimilar joints 

   상세보기

6. Materials & Design Plaine 93 224 2016 10.1016/j.matdes.2015.12.170 Interface formation and properties of friction spot welded joints of AA5754 and Ti6Al4V alloys 

   상세보기

7. Materials & Design Jamili-Shirvan 100 120 2016 10.1016/j.matdes.2016.03.074 Microstructure characterization and mechanical properties of Ti-based bulk metallic glass joints prepared with friction stir spot welding process 

   상세보기

8. Journal of materials processing technology Fereiduni 224 1 2015 10.1016/j.jmatprotec.2015.04.028 Aluminum/steel joints made by an alternative friction stir spot welding process 

   상세보기

9. Materials & Design Ahmed 91 378 2016 10.1016/j.matdes.2015.12.001 Microstructure and mechanical properties evolution of friction stir spot welded high-Mn twinning-induced plasticity steel 

   상세보기

10. Materials & Design Li 94 368 2016 10.1016/j.matdes.2016.01.081 Optimal design of thread geometry and its performance in friction stir spot welding 

    상세보기

11. Materials & Design Dong 94 457 2016 10.1016/j.matdes.2016.01.066 Refilled friction stir spot welding of aluminum alloy to galvanized steel sheets 

    상세보기

12. Journal of Materials Processing Technology Tozaki 210 6 844 2010 10.1016/j.jmatprotec.2010.01.015 A newly developed tool without probe for friction stir spot welding and its performance 

    상세보기

13. Transactions of Nonferrous Metals Society of China Zhang 24 6 1709 2014 10.1016/S1003-6326(14)63244-1 Friction stir keyholeless spot welding of AZ31 Mg alloy-mild steel 

    상세보기

14. Journal of Materials Processing Technology Hsieh 224 149 2015 10.1016/j.jmatprotec.2015.04.033 Friction stir spot welding of low-carbon steel using an assembly-embedded rod tool 

    상세보기

15. Journal of Materials Processing Technology Reilly 225 473 2015 10.1016/j.jmatprotec.2015.06.021 Modelling and visualisation of material flow in friction stir spot welding 

    상세보기

16. Materials Science and Engineering: A Cho 398 1 146 2005 10.1016/j.msea.2005.03.002 Modeling strain hardening and texture evolution in friction stir welding of stainless steel 

    상세보기

17. Materials Science and Engineering: A Buffa 419 1 389 2006 10.1016/j.msea.2005.09.040 A continuum based fem model for friction stir welding-model development 

    상세보기