Lv, Jian
(College of Materials Science and Engineering, Zhejiang University of Technology)
,
Zhu, Chenxi
(College of Materials Science and Engineering, Zhejiang University of Technology)
,
Qiu, Haonan
(College of Materials Science and Engineering, Zhejiang University of Technology)
,
Zhang, Jing
(College of Materials Science and Engineering, Zhejiang University of Technology)
,
Gu, Changdong
(School of Materials Science and Engineering, Zhejiang University)
,
Feng, Jie
(College of Materials Science and Engineering, Zhejiang University of Technology)
Abstract In severely cold regions, it is very difficult to prevent the formation of ice on solid surfaces, even on superhydrophobic (SH) surfaces. Compared with anti-icing surfaces, icephobic surfaces are more useful in practice. In this work, a traditional epoxy coating was modified by using malei...
Abstract In severely cold regions, it is very difficult to prevent the formation of ice on solid surfaces, even on superhydrophobic (SH) surfaces. Compared with anti-icing surfaces, icephobic surfaces are more useful in practice. In this work, a traditional epoxy coating was modified by using maleic anhydride (MAH) as a crosslinking agent, in addition to filling a small amount of epoxy resin grafted with fluorine containing chains (FEP). The wettability and the mechanical properties of the modified coating, as well as the adhesive strength of ice on the coating surface and the stability of the icephobic properties of the coating, were systematically studied. The results showed that the modified coating surface became more hydrophobic and the force required to remove ice from the surface was less than that needed for removing on the unmodified coating surface. Furthermore, the modified coating has excellent mechanical properties. After sanding with abrasive paper, the unmodified coating surface is more hydrophilic, whereas the modified coating surface retains its hydrophobicity. X-ray photoelectron spectroscopy (XPS) indicates that compared with crosslinking by traditional polyamides, crosslinking using MAH greatly reduces the number of polar groups on the coating surface. The FEP introduction further reduces the free energy of the coating surface. As a result, the modified epoxy coating exhibits excellent icephobic performance. This study will be helpful for the design of icephobic epoxy coatings for use in practical applications. For example, it may make the de-icing on the underside of trains running in cold regions becomes more easily. Highlights Robust hydrophobic and icephobic epoxy (EP) coatings were prepared by using maleic anhydride (MAH) as a crosslinking agent. Such hydrophobic and icephobic properties are not limited to the coating surface but are also present in the coating body. After sanding with abrasive paper, the coating surface still retains its hydrophobic and icephobic properties. XPS indicates that MAH crosslinking reduces the polar groups number on the coating surface thus brings icephobic property. Graphical abstract To trains running in winter in cold regions, it is unavoidable that icing would occur on the train chassis surface. Such phenomenon negatively affects the train’s safety. The surface of the chassis generally was coated with epoxy (EP) resin for anti-corrosion; however, traditional EP coating is not icephobic and even not hydrophobic. In this work, robust hydrophobic and icephobic EP coatings were successfully prepared by using maleic anhydride (MAH) as a crosslinking agent, in addition to filling a small amount of EP resin grafted with fluorine containing chains (FEP). Furthermore, such hydrophobic and icephobic properties are not limited to the outermost surface of the coating but are also present in the coating body. After sanding with abrasive paper, the coating surface still retains its hydrophobic and icephobic properties. XPS indicates that MAH crosslinking greatly reduces the number of polar groups on the coating surface. The FEP mixture further reduces the free energy of the coating surface. As a result, the modified EP coating exhibits excellent icephobic performance. The ice formed on such surface may be removed away by its self-weight. [DISPLAY OMISSION]
Abstract In severely cold regions, it is very difficult to prevent the formation of ice on solid surfaces, even on superhydrophobic (SH) surfaces. Compared with anti-icing surfaces, icephobic surfaces are more useful in practice. In this work, a traditional epoxy coating was modified by using maleic anhydride (MAH) as a crosslinking agent, in addition to filling a small amount of epoxy resin grafted with fluorine containing chains (FEP). The wettability and the mechanical properties of the modified coating, as well as the adhesive strength of ice on the coating surface and the stability of the icephobic properties of the coating, were systematically studied. The results showed that the modified coating surface became more hydrophobic and the force required to remove ice from the surface was less than that needed for removing on the unmodified coating surface. Furthermore, the modified coating has excellent mechanical properties. After sanding with abrasive paper, the unmodified coating surface is more hydrophilic, whereas the modified coating surface retains its hydrophobicity. X-ray photoelectron spectroscopy (XPS) indicates that compared with crosslinking by traditional polyamides, crosslinking using MAH greatly reduces the number of polar groups on the coating surface. The FEP introduction further reduces the free energy of the coating surface. As a result, the modified epoxy coating exhibits excellent icephobic performance. This study will be helpful for the design of icephobic epoxy coatings for use in practical applications. For example, it may make the de-icing on the underside of trains running in cold regions becomes more easily. Highlights Robust hydrophobic and icephobic epoxy (EP) coatings were prepared by using maleic anhydride (MAH) as a crosslinking agent. Such hydrophobic and icephobic properties are not limited to the coating surface but are also present in the coating body. After sanding with abrasive paper, the coating surface still retains its hydrophobic and icephobic properties. XPS indicates that MAH crosslinking reduces the polar groups number on the coating surface thus brings icephobic property. Graphical abstract To trains running in winter in cold regions, it is unavoidable that icing would occur on the train chassis surface. Such phenomenon negatively affects the train’s safety. The surface of the chassis generally was coated with epoxy (EP) resin for anti-corrosion; however, traditional EP coating is not icephobic and even not hydrophobic. In this work, robust hydrophobic and icephobic EP coatings were successfully prepared by using maleic anhydride (MAH) as a crosslinking agent, in addition to filling a small amount of EP resin grafted with fluorine containing chains (FEP). Furthermore, such hydrophobic and icephobic properties are not limited to the outermost surface of the coating but are also present in the coating body. After sanding with abrasive paper, the coating surface still retains its hydrophobic and icephobic properties. XPS indicates that MAH crosslinking greatly reduces the number of polar groups on the coating surface. The FEP mixture further reduces the free energy of the coating surface. As a result, the modified EP coating exhibits excellent icephobic performance. The ice formed on such surface may be removed away by its self-weight. [DISPLAY OMISSION]
Appl. Surf. Sci. Qi 476 161 2019 10.1016/j.apsusc.2019.01.073 Fluorine modification on titanium dioxide particles: improving the anti-icing performance through a very hydrophobic surface
Appl. Surf. Sci. Piscitelli 472 71 2019 10.1016/j.apsusc.2018.04.062 On a simplified method to produce hydrophobic coatings for aeronautical applications
Small Zhang 13 2017 10.1002/smll.201701867 Bioinspired surfaces with superwettability for anti-icing and ice-phobic application: concept, mechanism, and design
Appl. Surf. Sci. Luo 470 1139 2019 10.1016/j.apsusc.2018.10.174 Fabrication of slippery zn surface with improved water-impellent, condensation and anti-icing properties
Appl. Surf. Sci. Liu 400 498 2017 10.1016/j.apsusc.2016.12.219 Anti-icing property of bio-inspired micro-structure superhydrophobic surfaces and heat transfer model
Sol. Energy Mater. Sol. Cells Zhu 199 129 2019 10.1016/j.solmat.2019.04.029 Deep color, heat-reflective, superhydrophobic and anti-soiling coatings with check for waterborne silicone emulsion
ACS Appl. Mater. Inter. Zhang 10 40219 2018 10.1021/acsami.8b12567 Preparation of colorful, infrared-reflective, and superhydrophobic polymer films with obvious resistance to dust deposition
Langmuir Hao 30 15416 2014 10.1021/la504166x Mechanism of delayed frost growth on superhydrophobic surfaces with jumping condensates: more than interdrop freezing
Prog. Org. Coat. Khedir 112 304 2017 10.1016/j.porgcoat.2017.05.019 An outlook on tunable superhydrophobic nanostructural surfaces and their possible impact on ice mitigation
Prog. Org. Coat. Zhang 123 254 2018 10.1016/j.porgcoat.2018.03.026 Preparation of superhydrophobic polybenzoxazine/SiO2 films with self-cleaning and ice delay properties
Appl. Surf. Sci. Bao 437 202 2018 10.1016/j.apsusc.2017.12.096 A significant reduction of ice adhesion on nanostructured surfaces that consist of an array of single-walled carbon nanotubes: a molecular dynamics simulation study
Appl. Surf. Sci. Wang 355 226 2015 10.1016/j.apsusc.2015.06.203 Superhydrophobic surface on steel substrate and its anti-icing property in condensing conditions
Appl. Surf. Sci. Bharathidasan 314 241 2014 10.1016/j.apsusc.2014.06.101 Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces
Chem. Eng. J. Wu 355 901 2019 10.1016/j.cej.2018.07.204 Design and durability study of environmental-friendly room-temperature processable icephobic coatings
※ AI-Helper는 부적절한 답변을 할 수 있습니다.