전자산업과 전파통신기술이 발달함에 따라 인류는 풍요로운 생활을 영위하고 있지만, 전파의 사용증대로 인해 EMI와 같은 많은 사회적 문제와 불요 전자파가 발생하고 있다. 따라서, CISPR, FCC, ANSI 등의 기구는 EMC 대책을 위해 전파환경의 규정을 제안하고 있다 EMI/EMC 측정을 위한 전파무향실(anechoic chamber)에 대한 국제 규정을 만족하기 위해서는, 30 MHz ∼ 1,000 MHz까지의 범위에서 20 dB이상의 전파흡수능을 가져야 한다. 하지만, 1998년 11월, CISPR11은 EMI 측정의 주파수 범위를 1 GHz ∼ 18 GHz로 확장하였다[1]. 본 논문에서는 상기의 요구를 만족하는 새로운 형태의 전파흡수체(Electromagnetic Wave Absorber)를 제안하고 등가재료 정수법(Equivalent Material Constants Methods)을 사용하여 광대역 설계를 수행하였다. 그 외에 실험은 30 MHz ∼ 2 GHz까지의 주파수 범위에서 행해졌으며, 제안한 설계 이론의 타당성을 확인하였다.
전자산업과 전파통신기술이 발달함에 따라 인류는 풍요로운 생활을 영위하고 있지만, 전파의 사용증대로 인해 EMI와 같은 많은 사회적 문제와 불요 전자파가 발생하고 있다. 따라서, CISPR, FCC, ANSI 등의 기구는 EMC 대책을 위해 전파환경의 규정을 제안하고 있다 EMI/EMC 측정을 위한 전파무향실(anechoic chamber)에 대한 국제 규정을 만족하기 위해서는, 30 MHz ∼ 1,000 MHz까지의 범위에서 20 dB이상의 전파흡수능을 가져야 한다. 하지만, 1998년 11월, CISPR11은 EMI 측정의 주파수 범위를 1 GHz ∼ 18 GHz로 확장하였다[1]. 본 논문에서는 상기의 요구를 만족하는 새로운 형태의 전파흡수체(Electromagnetic Wave Absorber)를 제안하고 등가재료 정수법(Equivalent Material Constants Methods)을 사용하여 광대역 설계를 수행하였다. 그 외에 실험은 30 MHz ∼ 2 GHz까지의 주파수 범위에서 행해졌으며, 제안한 설계 이론의 타당성을 확인하였다.
According to the progress of the electronic industry and radio communication technologies, mankind might enjoy its abundant life. On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organizat...
According to the progress of the electronic industry and radio communication technologies, mankind might enjoy its abundant life. On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organizations such as CISPR, FCC, ANSI, etc. have provided the standard of electromagnetic wave environment for the countermeasure of the EMC. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 1 GHz to 18 GHz additionally in the bandwidth of EMI measurement[1]. In this paper, we proposed a new type absorber satisfying the above requirements and carried out broadband design using the equivalent material constants method. Futhermore, the experiments were carried out over the frequency band from 30 MHz to 2 GHz, and hence, the validity of the proposed design theory was confirmed.
According to the progress of the electronic industry and radio communication technologies, mankind might enjoy its abundant life. On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organizations such as CISPR, FCC, ANSI, etc. have provided the standard of electromagnetic wave environment for the countermeasure of the EMC. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 1 GHz to 18 GHz additionally in the bandwidth of EMI measurement[1]. In this paper, we proposed a new type absorber satisfying the above requirements and carried out broadband design using the equivalent material constants method. Futhermore, the experiments were carried out over the frequency band from 30 MHz to 2 GHz, and hence, the validity of the proposed design theory was confirmed.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.