Li, Yijun
(University of Michigan-Dearborn,Department of Mechanical Engineering,Dearborn,MI,USA,48128)
,
Shim, Taehyun
(University of Michigan-Dearborn,Department of Mechanical Engineering,Dearborn,MI,USA,48128)
,
Shin, Dong-Hwan
(Daegu Gyeongbuk Institute of Science & Technology,Research Division of Automotive Technology,Daegu,South Korea)
,
Lee, Seonghun
(Daegu Gyeongbuk Institute of Science & Technology,Research Division of Automotive Technology,Daegu,South Korea)
,
Jin, Sungho
(Daegu Gyeongbuk Institute of Science & Technology,Research Division of Automotive Technology,Daegu,South Korea)
The electromechanical brake (EMB) is a type of brake-by-wire (BBW) system that generates the clamping force between brake pad and disk through an electric motor and mechanical transmission. In this paper, an EMB clamping force control system is developed that addresses several major challenges in pr...
The electromechanical brake (EMB) is a type of brake-by-wire (BBW) system that generates the clamping force between brake pad and disk through an electric motor and mechanical transmission. In this paper, an EMB clamping force control system is developed that addresses several major challenges in practical implementation. Firstly, a nonlinear EMB model including the DC motor, planetary gear set, ball screw, and clamping force model is built. Particularly, a novel clamping force model is introduced based on a linear transform of two polynomial functions. Then, a clamping force estimation algorithm is proposed, which only requires the existing measurements of motor torque, angular speed, and position. The contact point of the brake pad and the disk is also estimated using angular acceleration as an indicator. The tracking controller is based on the disturbance observer structure, with a PI feedback controller and a zero phase error tracking feedforward controller. Finally, the performance of the entire control system under various conditions is evaluated based on simulation.
The electromechanical brake (EMB) is a type of brake-by-wire (BBW) system that generates the clamping force between brake pad and disk through an electric motor and mechanical transmission. In this paper, an EMB clamping force control system is developed that addresses several major challenges in practical implementation. Firstly, a nonlinear EMB model including the DC motor, planetary gear set, ball screw, and clamping force model is built. Particularly, a novel clamping force model is introduced based on a linear transform of two polynomial functions. Then, a clamping force estimation algorithm is proposed, which only requires the existing measurements of motor torque, angular speed, and position. The contact point of the brake pad and the disk is also estimated using angular acceleration as an indicator. The tracking controller is based on the disturbance observer structure, with a PI feedback controller and a zero phase error tracking feedforward controller. Finally, the performance of the entire control system under various conditions is evaluated based on simulation.
이 논문을 인용한 문헌
관련 콘텐츠
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.