초록 ▼

To avoid possible damage to an associated hoist and sheaves, a cable termination is provided which has the capability of permitting a cable to be separated cleanly from a firmly anchored connector at the hoist when the cable is subjected to a limited force. To insure that resistance of the cable to

To avoid possible damage to an associated hoist and sheaves, a cable termination is provided which has the capability of permitting a cable to be separated cleanly from a firmly anchored connector at the hoist when the cable is subjected to a limited force. To insure that resistance of the cable to being separated from the connector is limited, the individual conductors are trimmed to varying lengths before being soldered or fastened to the connector. The wires and connections are then potted with a first potting material which has limited shear strength, and this assembly then has a jacket of high strength insulating material molded to its outside covering part of the connector, the first potting material, and a portion of the cable jacket, thereby forming a good watertight seal at the connector and around the cable. When subjected to a predictable axial force, the annular seal fails and the conductor leads are each (or in small groups) subjected to the entire applied axial force in turn, thus causing the conducting wires to fail in sequence rather than permitting several wires to carry the load at once. With the successive failures of the connectors, the low strength interior potting compound crumbles and the conducting wires pull free of the connector without carrying any hard potting material or other connector parts which would cause the separated part to have a diameter significantly greater than the cable itself.

대표청구항 ▼

In a cable termination comprising an electrical connector having terminals for a large number of wires, a cable including a large number of electrical conducting wires connected to said terminals, and an insulating jacket surrounding said wires, characterized in that said electrical conducting wires

In a cable termination comprising an electrical connector having terminals for a large number of wires, a cable including a large number of electrical conducting wires connected to said terminals, and an insulating jacket surrounding said wires, characterized in that said electrical conducting wires are of graduated lengths such that the shortest of said conducting wires is connected essentially taut to said connector and others of said wires have varying amounts of slack such that no more than a limited number of said wires are of substantially equal length, a soft flexible material having a low shear strength encapsulating said wires, and a covering sheath of high strength flexible material, such that when said cable is subjected to a high force tending to separate said cable from said connector, said force is applied to said shortest wire and then to the wires of successively greater length as the shorter wires fall until the cable is entirely separated from said connector. A method of connecting a multiconductor electrical cable having an external insulating jacket to a connector having connecting lugs to insure that said cable will separate cleanly from said connector with the application of a limited force to said cable comprising the steps of: a. trimming the individual conductors of said cable to varying lengths, b. fastening said conductors to said connecting lugs so that one such conductor is taut and others of said conductors have varying amounts of slack, c. encapsulating said conductors and said connecting lugs in a soft, flexible material having low shear strength, d. molding a covering sheath of high strength flexible material to said connector, said encapsulating material and said insulating jacket, and bonding said sheath to said insulating jacket over a limited annular area.