초록 ▼

As an improved way of effecting fast valving of turbines of power system steam-electric installations of types that incorporate by-pass systems for by-passing steam from a point ahead of the high pressure turbine either directly to the condenser or to the cold reheat line, and in the latter case als

As an improved way of effecting fast valving of turbines of power system steam-electric installations of types that incorporate by-pass systems for by-passing steam from a point ahead of the high pressure turbine either directly to the condenser or to the cold reheat line, and in the latter case also from the hot reheat line to the condenser, and where the purpose of employment of fast valving is to improve the stability of power transmission over transmission circuits to which the generators of the installations in question make connection, when stability is threatened by line faults and certain other stability endangering events, the approach of rapidly closing intercept valves at fastest available closing speed in response to a fast valving signal, is supplemented by bringing into effect preprogrammed processes of control valve repositioning, plus intercept valve reopening, so effected as to cause turbine driving power subsequent to generator rotor first forward swing to hold below a preset value that is less than the driving power that applied prior to the event that brought about development of the signal. When high pressure by-pass valves discharge steam directly to the condenser, and there is a need to protect the reheater from overheating preprogrammed provision is made for runback of rate of steam production within the steam generator to a value that will cause termination of the discharge of steam through the said high pressure by-pass valves that will at first take place, with provision so that said runback is effected rapidly enough to avoid damage to the reheater.

대표청구항 ▼

In a steam-electric installation incorporating a fossil fuel type steam generator and an alternating current type generator of electric power, which is driven by a compound type steam turbine incorporating a high pressure turbine which receives steam from the steam-generator through control valves a

In a steam-electric installation incorporating a fossil fuel type steam generator and an alternating current type generator of electric power, which is driven by a compound type steam turbine incorporating a high pressure turbine which receives steam from the steam-generator through control valves and discharges steam to a reheater from which steam passes through intercept valves into an intermediate pressure turbine, and thence to one or more low pressure turbines, and next flows from the discharge of these turbines into a condenser, which installation also incorporates one or more power operated relief valves located ahead of the high pressure turbine, which are so controlled as to open and discharge steam to the condenser when pressure ahead of the valve or valves exceeds a set point which follows continuously and automatically the operating pressure of the turbine, the generator of which installation makes connection to a power system which includes a plurality of prime mover driven generators, which generators are interconnected by a plurality of alternating current transmission circuits, the method of employing fast valving as a way to avoid development of system instability, which comprises the steps of, 1. providing within the turbine and steam generator control system, for response to a fast valving initiation signal input by bringing into effect preprogrammed jointly effected processes of, a. at least partial intercept valve closure effected fast enough to have a favorable effect on generator rotor first swing stability, and control valve repositioning plus intercept valve reopening so effected as to cause turbine driving power subsequent to generator rotor first forward swing to hold below a preset value that is less than the driving power that applied prior to the event that brought about development of the signal, b. runback of rate of steam production within the steam generator to a value that will cause termination of the discharge of steam through said power operated relief valves that will at first take place, with provision so that said runback is effected rapidly enough to avoid overheating of the reheater, 2. providing in a preprogrammed manner so that a. a fast valving signal is generated on the occurrence of system stability endangering events of a type that cause the said generator to experience a sudden at least momentary reduction of load, b. the said fast valving signal is made available as an input to that portion of the turbine\s control system that is adapted to bring into effect the said preprogrammed processes.