초록 ▼

A blow molded or injection molded plastic container has a neck formed with a substantially horizontal flat top, an internal substantially vertical first sealing surface, a groove, a very smooth second sealing surface of less diameter than the first sealing surface and a lower groove and then a verti

A blow molded or injection molded plastic container has a neck formed with a substantially horizontal flat top, an internal substantially vertical first sealing surface, a groove, a very smooth second sealing surface of less diameter than the first sealing surface and a lower groove and then a vertical stretch which merges into a breast which widens out to the full size of the container, an external first vertical surface, a horizontal inwardly extending soulder, an indented second vertical surface of lesser diameter than the first vertical surface and an external bead, and a third vertical surface at about the level of the vertical stretch. The second sealing surface has an “injection finish”obtained by use of a blow pin in the mold. The cap has upper and lower internal beads (which seat under the shoulder and external bead of the neck) interrupted in a plurality of gaps, permitting stretching of the cap to seat on the neck. The top disc has a flexible peripheral flange which may be gripped to lift the cap when the bottom of the skirt is torn off.

대표청구항 ▼

A cap having a central top disk, a thin-walled substantially cylindrical outer skirt of substantially uniform thickness depending from the periphery of said disk, said outer skirt being scored and weakened in a circumferential first line spaced downwardly from the top of said outer skirt and in a se

A cap having a central top disk, a thin-walled substantially cylindrical outer skirt of substantially uniform thickness depending from the periphery of said disk, said outer skirt being scored and weakened in a circumferential first line spaced downwardly from the top of said outer skirt and in a second line joining said first line and extending down to the bottom edge of said outer skirt, a tab attached to the bottom edge of said outer skirt adjacent said second line, an upper internal circumferential bead on said outer skirt between said first line and said disk, a lower internal second bead on said outer skirt below but adjacent said first line, both of said beads being interrupted in a series of gaps spaced around the circumference of said outer skirt forming bead sections, the sections of said upper bead between interruptions being substantially shorter than the sections of said lower bead between interruptions.