초록 ▼

In disposable diapers which are equipped with tape closure means and have an impermeable thin film backing, the improvement in which selected areas of the thin film, which areas serve as tape securement zones when the diapers are in use, have uniformly adhered to that side of the film facing the dia

In disposable diapers which are equipped with tape closure means and have an impermeable thin film backing, the improvement in which selected areas of the thin film, which areas serve as tape securement zones when the diapers are in use, have uniformly adhered to that side of the film facing the diaper interior a layer of hot melt adhesive to provide a composite structure in the selected areas having a high resistance to tearing when tensile loads are applied. The hot melt adhesive layer has a lower modulus of elasticity than the film and is applied in heat-softened condition to obtain strong, uniform adherence to the film. In a method for applying the adhesive layer, a wide band of adhesive of predetermined thickness is extruded in heat-softened condition into direct contact with selected areas of a moving web of the film. The adhesive is one which has a Ring & Ball softening point lower than the heat distortion temperature of the film and during application will not thermally degrade or distort the film.

대표청구항 ▼

A pressure-sensitive tape closure system for disposable diapers, said diaper having in combination: a fluid permeable facing sheet; a backing sheet of a thin polyolefin film attached to the facing sheet along the periphery of the latter; an absorbent pad disposed between said facing sheet and said b

A pressure-sensitive tape closure system for disposable diapers, said diaper having in combination: a fluid permeable facing sheet; a backing sheet of a thin polyolefin film attached to the facing sheet along the periphery of the latter; an absorbent pad disposed between said facing sheet and said backing sheet; a pair of pressure-sensitive tape tab strips having a higher peel adhesion value than the tensile strength and tear resistance of said backing sheet attached to the backing sheet near the diaper corners along a portion of the length of said strips, said unattached portions being designed to engage the exterior of said backing sheet in a predetermined attachment zone; and a hot melt adhesive layer having a lower modulus of elasticity and a Ring & Ball softening point lower than the modulus of elasticity and the heat distortion temperature of said backing sheet, respectively, the adhesive layer selectively located in the interior of said backing sheet underneath said attachment zone thereby increasing the stiffness of the film in said zone, said adhesive layer attached only to said backing in said zone.