초록 ▼

Molding compositions are prepared from blends of (A) a thermoplastic copolyetherester elastomer; (B) a styrene maleic anhydride polymer; (C) an ABS or MBS polymer; and (D) a nitrile rubber. Component B, the styrene maleic anhydride polymer may optionally contain a termonomer such as methyl-methacryl

Molding compositions are prepared from blends of (A) a thermoplastic copolyetherester elastomer; (B) a styrene maleic anhydride polymer; (C) an ABS or MBS polymer; and (D) a nitrile rubber. Component B, the styrene maleic anhydride polymer may optionally contain a termonomer such as methyl-methacrylate or acrylonitrile and a rubber component.

대표청구항 ▼

A polyblend consisting essentially of: A. from 3 to 20% by weight of a thermoplastic copolyetherester elastomer; B. from, 15 to 75% by weight of a polymer of a vinyl-aromatic monomer and an unsaturated dicarboxylic acid anhydride monomer and optionally a termonomer selected from the group consisting

A polyblend consisting essentially of: A. from 3 to 20% by weight of a thermoplastic copolyetherester elastomer; B. from, 15 to 75% by weight of a polymer of a vinyl-aromatic monomer and an unsaturated dicarboxylic acid anhydride monomer and optionally a termonomer selected from the group consisting of C1 to C3 acrylates and methacrylates and unsaturated nitriles, wherein the relative amounts by weight of the monomers in the polymer are 50 to 85% of the vinyl-aromatic monomer, 15 to 35% of the dicarboxylic acid anhydride and 0 to 20% of the termonomer; and wherein the monomers are polymerized in the presence of 0 to 25% by weight of a rubber having a glass transition temperature below 0°C.; C. from 12 to 60% by weight of a grafted polymer composition comprising a graft polymer of from 20 to 40 parts by weight of a monomer selected from the group consisting of acrylonitrile and methyl methacrylate and 80 to 60 parts by weight of a vinyl aromatic monomer, the polymer being grafted onto a substrate rubber having a glass transition temperature below 0°C. wherein the monomers are polymerized in the presence of and grafted onto the substrate rubber, wherein the weight percent of the rubber is in the range from 10 to 60% by weight based on the weight of the composition; and D. from 3 to 20% by weight of a nitrile rubber comprising a polymer of 15 to 50 parts by weight of an unsaturated nitrile monomer and 85 to 50 parts by weight of a diene monomer wherein the polymer has a Mooney viscosity in the range from 30 to 95 cps. and wherein the weight percent for Components (A), (B), (C) and (D) is based on the total amount of Components (A), (B), (C) and (D) in the polyblend. A polyblend consisting essentially of: A. from 3 to 20% by weight of a thermoplastic copolyetherester elastomer; B. from 15 to 75% by weight of a polymer of a styrene-maleic anhydride polymer comprising 50 to 85% by weight of styrene, 5 to 35% by weight of maleic anhydride and 0 to 20% of a termonomer selected from the group consisting of C1 to C3 acrylates and methacrylates and unsaturated nitriles; C. from 12 to 60% by weight of a grafted polymer composition comprising a rubber-modified polymer of a vinyl aromatic monomer, an unsaturated dicarboxylic acid anhydride and optionally a termonomer selected from the group consisting of C1 to C3 acrylates and methacrylates and unsaturated nitriles; wherein the monomers are polymerized in the presence of 5 to 35% by weight of a rubber having a glass transition temperature below 0°C.; and D. from 3 to 20% by weight of a nitrile rubber comprising a polymer of 15 to 50 parts by weight of acrylonitrile and 85 to 50 parts by weight of butadiene wherein the polymer has a monomer viscosity in the range from 30 to 95 cps. and wherein the weight ratio of the component B styrene-maleic anhydride polymer to component C grafted polymer composition is in the range of 90:10 to 20:80; and wherein the weight percent for Components (A), (B), (C) and (D) is based on the total amount of components (A), (B), (C) and (D) in the polyblend.