초록 ▼

Electrical systems, especially elongate heating systems, include means for monitoring circuit continuity and/or absence of ground faults. The systems comprise a switching device, e.g. a thermostat, as well as a circuit breaker. When the switching device is on, a relatively high current passes throug

Electrical systems, especially elongate heating systems, include means for monitoring circuit continuity and/or absence of ground faults. The systems comprise a switching device, e.g. a thermostat, as well as a circuit breaker. When the switching device is on, a relatively high current passes through the circuit and when it is off, little or no current passes through the circuit. In one embodiment, a small controlled residual current flows in the circuit even when the switching device is off, and a current-detecting device signals when a discontinuity causes the current to drop below the expected value for the residual current. In another embodiment, the switching device is placed so that the heater (or other electrical load) is at a positive potential with respect to ground even when the switching device is off, and a ground fault indicator is used to compare the currents in the two legs of the circuit and to signal when a ground fault causes the currents to differ. Preferred circuits make use of both these embodiments. Preferably the fault circuits are powered by the same power source as the circuit which is being tested, but the fault indicators continue to signal faults even when the circuit is no longer powered, and both correction of the fault and powering of the circuit are required to cancel the fault indication.

대표청구항 ▼

An electrical system which comprises (i) a source of electrical power having a first and a second live terminal; (ii) a circuit breaker connected to each live terminal of the power source; (iii) an electrical load; (iv) a first electrical connection means which is live and which connects the power s

An electrical system which comprises (i) a source of electrical power having a first and a second live terminal; (ii) a circuit breaker connected to each live terminal of the power source; (iii) an electrical load; (iv) a first electrical connection means which is live and which connects the power source to the electrical load; (v) a second electrical connection means which connects the power source to the electrical load; (vi) an electrical switching device which has a low impedance when it is closed and a high impedance when it is open and which lies in the second electrical connection means; and (vii) a ground fault indicator which signals a difference between the current flowing in the first connection means and the current flowing in the second connection means; whereby the load is live when the circuit breaker is closed, both when the switching device is closed and when it is open, and the ground fault indicator will signal a leakage from the electrical load to ground both when the switching device is closed and when it is open.