초록 ▼

A plant watering and/or feeding unit automatically and periodically dispenses water as needed. As assembled, an air tube extends essentially throughout the central length of a selected plastic bottle and beyond the other wise sealed cap entry of this plastic bottle for insertion of the extending, fi

A plant watering and/or feeding unit automatically and periodically dispenses water as needed. As assembled, an air tube extends essentially throughout the central length of a selected plastic bottle and beyond the other wise sealed cap entry of this plastic bottle for insertion of the extending, first heat sealed then partially cut opened, air tube end, down through the soil without being blocked by any entering soil, to contact the bottom of the earth filled plant container. A liquid orifice is located in the plastic bottle in its shoulder about midway between the entry and the side of the bottle. During plant watering and/or feeding cycles, liquid drips from the liquid orifice in the shoulder, until the water table in the soil, i.e. the liquid level in the soil, rises above the end of the partially opened air tube to seal off the entry of air. Then the dripping of liquid stops, until this liquid level goes below the end of the partially opened air tube. With the liquid seal broken once again the vacuum volume above the liquid level in the bottle becomes a pressure air volume, and liquid drips out the orifice and into the soil. This cycle continues until the prefilled volume of watering and/or feeding liquid is depleted.

대표청구항 ▼

A plant feeding unit to supply liquid to growing plants in containers on their demand, as sensed in accordance with a liquid table in soil of a container, comprising: (a) a receptacle for liquid said receptacle being formed from a plastic bottle, said receptacle to be positioned upside down when ini

A plant feeding unit to supply liquid to growing plants in containers on their demand, as sensed in accordance with a liquid table in soil of a container, comprising: (a) a receptacle for liquid said receptacle being formed from a plastic bottle, said receptacle to be positioned upside down when initially substantially filled with liquid and thereafter used as a source of liquid, said receptacle having an entry which in turn has interfitting structure, and having an orifice fr liquid flow formed in a shoulder of the receptacle midway between the entry and an outer wall, with the orifice having a one eighth of an inch diameter allowing a sufficient liquid discharge flow yet an equilibrium to be reached during the course of the discharge of liquid when the downward pull of liquid gravity is exactly balanced by the upward pull of vacuum in said receptacle which is created after the liquid table in the soil rises high enough to seal off a near bottom vent in a sensor tube; (b) a sensor tube for guiding an airflow, formed from a plastic tube having an overall length twice the depth of the receptacle, a top circular open end inserted upwardly into the receptacle until said top circular open end is slightly spaced from the invented bottom of the bottle, and having a bottom heat sealed end, which is thereafter selectively cut on a bias in an angular range of between twenty and eighty degrees from the horizontal bottom of the bottom heat sealed end leaving at least one half of the width of the bottom of the sensor tube uncut, said cut opening providing a narrow non soil clogging vent for air with the uncut portion of the bottom heat sealed end providing the means to space the narrow non soil clogging vent for air above the bottom of the plant container; (c) a cap, having a central hole to receive the sensor tube and having interfitting structure for securement to the interfitting structure of the entry of the receptacle; and (d) a seal to create a multiple effective seal between the sensor tube, receptacle, and cap.