초록 ▼

The system is used to measure the gap between the turbine engine compressor blade tip and the compressor case. The measurement is accomplished while the engine is running. This system has several unique features which minimize problems plaguing earlier systems. These include tuning stability and sen

The system is used to measure the gap between the turbine engine compressor blade tip and the compressor case. The measurement is accomplished while the engine is running. This system has several unique features which minimize problems plaguing earlier systems. These include tuning stability and sensitivity drift. Both these problems are intensified by the environmental factors present on compressors, i.e., wide temperature fluctuations, vibrations, conductive contamination of probe tips and others. The circuitry in this new system provides phase lock feedback to control tuning and shunt calibration to measure sensitivity. The use of high frequency excitation lowers the probe tip impedance, thus minimizing the effects of contamination. The ability to control tuning and to calibrate has been demonstrated.

대표청구항 ▼

A compressor blade clearance measurement system for measuring the gap between a turbine engine compressor blade tip and a compressor case, the measurement being accomplished while the engine is running, said measurement system comprising a probe and an exciter/detector module, the probe being couple

A compressor blade clearance measurement system for measuring the gap between a turbine engine compressor blade tip and a compressor case, the measurement being accomplished while the engine is running, said measurement system comprising a probe and an exciter/detector module, the probe being coupled to the exciter/detector module via a cable to form a cable probe assembly, said probe having a tip used as a capacitor sensor, whereby the component electronics are not part of a probe assembly but are included in the exciter/detector module away from the probe; wherein the exciter/detector module comprises a tuned circuit coupled between an input point and an output point, the input point being coupled to a high-frequency source for excitation, the output point being coupled via said cable and probe to the probe tip, the tuned circuit being tuned to the high frequency, in which the blade to sensor capacitance provides a phase change in the tuned circuit response, phase detector means coupled to the tuned circuit at said input and output points for detecting said phase change, the phase detector means having an output for a signal, with an output baseline, supplied to processing means to determine the value of said gap; wherein said exciter/detector module further includes a calibration circuit coupled to said output point for calibrating the system, and a tuning control circuit comprising a high Q varactor diode also coupled to said output point, and wherein the system includes tune control means coupled to the varactor diode via a resistor for supplying an adjustable direct-current bias to maintain the phase detector output baseline at zero, whereby the the instrument can be electronically calibrated, even while the engine is operating; wherein said calibration circuit comprises first and second variable capacitors, switching means having first and second settings for respectively connecting the first or second capacitor to said output point, the calibration set-up being accomplished with the switching means at its first setting by adjusting the first capacitor to fine tune the cable probe assembly, whereas the second capacitor when selected by operating the switching means to its second setting is adjusted to a predetermined baseline shift, the varactor diode control voltage being held at a nominal value during these procedures, the probe to blade calibration being done while there is assurance that the sensitivity of the system has not changed, so that during any subsequent test operation, the switching means can be operated to its second setting and the baseline shift noted, the varactor diode control voltage being held constant while the switching means is at its second setting, so that any change in baseline value from that taken during calibration may be used to adjust the data accordingly.