초록 ▼

A rotary blow molding machine includes a base, a turntable on the base rotatable about a vertical axis and a number of mold units spaced around the turntable. Each mold unit includes a pair of mold halves which close on and capture a growing vertical parison at an extrusion station and then fall awa

A rotary blow molding machine includes a base, a turntable on the base rotatable about a vertical axis and a number of mold units spaced around the turntable. Each mold unit includes a pair of mold halves which close on and capture a growing vertical parison at an extrusion station and then fall away from the parison as the parison is severed. The captured parison is blow molded and cooled as the blow unit is rotated around the turntable. The finished article, commonly a bottle, is ejected from between the mold halves before the mold halves return to the extrusion station.

대표청구항 ▼

A method of blow molding an article using a pair of mold halves defining a mold cavity when closed and an extrusion die head, including the steps of: a. continuously extruding a thermoplastic resin parison vertically downwardly from an extrusion die head and into an extrusion station; b. moving an o

A method of blow molding an article using a pair of mold halves defining a mold cavity when closed and an extrusion die head, including the steps of: a. continuously extruding a thermoplastic resin parison vertically downwardly from an extrusion die head and into an extrusion station; b. moving an open pair of vertically supported mold halves into the extrusion station to either side of the downwardly growing parison; c. supporting said mold halves vertically at said extrusion station by a support pad movable away from the mold halves; d. closing the mold halves to capture the parison within the mold cavity; e. separating the captured parison from a growing new parison above the closed mold halves; f. moving the closed mold halves from the growing new parison by rapidly withdrawing the support pad away from the mold halves and allowing the closed mold halves and captured parison to gravity free-fall vertically downwardly away from the extrusion die head without lateral shifting at a rate greater than the rate of new parison growth down from the extrusion die head until the mold halves are free of the new parison and then moving the mold halves away from the extrusion station; g. maintaining the new parison without lateral shifting during steps e. and f.; h. blowing the captured parison against the mold cavity to form the article; and, i. opening the mold halves and ejecting the blown article.