초록 ▼

A microprocessor controls a heater which generates steam inside the sealed chamber of a sterilizer. During that portion of the sterilizer cycle wherein sterilizing conditions are trying to be attained, the microprocessor monitors both the temperature and pressure levels inside the chamber by control

A microprocessor controls a heater which generates steam inside the sealed chamber of a sterilizer. During that portion of the sterilizer cycle wherein sterilizing conditions are trying to be attained, the microprocessor monitors both the temperature and pressure levels inside the chamber by controlling the heater and waits until both variables reach predetermined levels before starting a sterilize timer. Once the timer is started, it is stopped if the level of either one of the temperature or pressure variables drops below a predetermined minimum value which, in the preferred embodiment, air their optimum values. While the sterilize timer is timing, the pressure level rather than the temperature level is used by the microprocessor to control the heater. These features allow a more reliable and accurate control of the generation and maintenance of sterilizing conditions inside the chamber, resulting in greater assurance of complete sterilization while minimizing the expenditure of time and energy.

대표청구항 ▼

Sterilizing apparatus, comprising: a chamber for receiving items to be sterilized; means coupled to said chamber for sealing said chamber so as to be able to withstand an internal pressurization; dosing means coupled to said chamber for allowing the entry into said chamber of a predetermined amount

Sterilizing apparatus, comprising: a chamber for receiving items to be sterilized; means coupled to said chamber for sealing said chamber so as to be able to withstand an internal pressurization; dosing means coupled to said chamber for allowing the entry into said chamber of a predetermined amount of liquid in response to a DOSE control signal; a heater coupled to said chamber for heating the interior thereof in response to a HEAT control signal; pressure and temperature signal generating means for providing pressure and temperature signals, respectively, representative of pressure and temperature conditions, respectively, inside said chamber; a timer for timing the duration during which sterilizing conditions are maintained inside said chamber, said timer being started and stopped in response to START and STOP control signals, respectively; and a microprocessor controller for generating said DOSE, HEAT, START and STOP control signals and for causing said DOSE, HEAT, START and STOP control signals to be applied to said dosing means, heater and timer, respectively, (a) said microprocessor controller causing said DOSE and HEAT control signals to be applied at the beginning of a sterilization cycle of said sterilizer so as to generate a vapor phase of said liquid which is allowed to enter said chamber, and thereafter monitoring both said temperature and pressure signals until they both reach predetermined set levels and, when reaching said predetermined set levels, providing said START control signal to said timer; (b) said microprocessor controller including monitor means for monitoring said pressure and temperature signal levels after said timer has been started and if the level of either of said signals falls below a predetermined minimum level, providing said STOP control signal to said timer so as to stop said timer; and (c) said microprocessor controller including additional timing means for timing a preset duration after said monitor means has provided said STOP control signal, and if both said pressure and temperature signal levels reach their said minimum levels before said preset duration ends, said monitor means restarts said timer and said microprocessor controller causes said HEAT control signal to be applied to said heater in response to the level of said pressure signal.