초록 ▼

A windmill of two designs, both aesthetically acceptable and operational without noise pollution, having a rotatable vertical shaft with either three or four windtraps consisting of a pair of concave vanes. These vanes are attached by welding to both the base and top disk plate making up a windtrap

A windmill of two designs, both aesthetically acceptable and operational without noise pollution, having a rotatable vertical shaft with either three or four windtraps consisting of a pair of concave vanes. These vanes are attached by welding to both the base and top disk plate making up a windtrap unit. Each windtrap vane is positioned to the others at 60 degree displacement for the first design and 45 degrees on the second design. The horizontal exposure area to the wind fluctuates from 50% to 100% as the shaft makes a complete turn. Torque is applied to the shaft by the impact of the wind from any direction against the curved vanes. The kenetic energy of the wind is transmitted through the shaft, flywheel, and belts which turn multiple generators that are used to produce electricity. The electricity is further processed by a micro controller to make it usable for home, farm, and business use. It further utilizes battery packs for storing electricity. The system can be lowered to a horizontal position in the event of a severe storm. The invention also contemplates using superconductivity for maximum generation of electricity and magnetic shielding.

대표청구항 ▼

A windtrap energy system which converts kinetic energy of the wind to the electrical energy usable for home, farm, or business comprised of: a structural frame that is supported by a base foundation and winch support system; a rotary shaft that is attached to the frame via a bearing housing; a serie

A windtrap energy system which converts kinetic energy of the wind to the electrical energy usable for home, farm, or business comprised of: a structural frame that is supported by a base foundation and winch support system; a rotary shaft that is attached to the frame via a bearing housing; a series of three windtraps connected to the rotary shaft; each windtrap consisting of two half disks that are attached to the rotary shaft and a pair of concave vanes attached to the disks in opposite directions and having partial overlap at the center of the disk; each of the concave vanes are 60 degrees apart from each other on a horizontal plane thereby providing kinetic energy capture from wind in any direction and the windtrap energy system is capable of sustaining winds up to 75 miles per hour and also the windtrap energy system is capable of producing electricity at wind speeds less that 10 miles per hour; a flywheel attached to the rotary shaft and carrying two belts that are attached to pairs multiple generator devices in pairs with one of the pair being a DC induction generator and the other an AC generator; an electrical controller that analyzes electrical flow and develops a set required voltage and current at 60 hertz, said electrical controller utilizes as a primary source the windtrap energy system and as a secondary source battery packs which during low energy consumption are recharged by the windtrap energy system; the winch support system is connected to the frame and can lower the windtrap energy system to a safe horizontal position in the event of severe wind conditions after a breaking device has been set.