초록 ▼

A radiant electric heater (10) has two coiled resistance wire heating elements (22,24) each connected to one terminal (N) of a power supply via respective rectifiers. These rectifiers are each made up of two like-poled arms of a bridge rectifier (34) connected in parallel, and they are arranged to a

A radiant electric heater (10) has two coiled resistance wire heating elements (22,24) each connected to one terminal (N) of a power supply via respective rectifiers. These rectifiers are each made up of two like-poled arms of a bridge rectifier (34) connected in parallel, and they are arranged to allow current through one heating element (22) on positive-going half-cycles of the power supply waveform, and through the other heating element (24) on negative-going half-cycles. The elements are rated for continuous power dissipation under these circumstances. A PTC thermistor (36) is connected between the ends of the heating elements connected to the rectifiers. Optionally an NTC thermistor (40) can be connected in series with the PTC thermistor. Upon initial energization the PTC thermistor is a near short-circuit, so current flows through both heating elements on both polarity half-cycles, dissipating twice their rated power. The elements increase in temperature more quickly than if they were initially energized at only their rated power, so the visible response of the elements to energization is faster. Meanwhile the PTC thermistor increases in resistance owing to self-heating, thereby removing the short-circuit after a few seconds, reducing the power dissipation in the elements to its normal level and protecting them from excessive operating temperatures.

대표청구항 ▼

A radiant electric heater comprising first and second resistive heating elements arranged to be coupled to one terminal of an electric supply via respective, oppositely-poled rectifiers, and a positive temperature coefficient thermistor coupled between the ends of the heating elements connected to t

A radiant electric heater comprising first and second resistive heating elements arranged to be coupled to one terminal of an electric supply via respective, oppositely-poled rectifiers, and a positive temperature coefficient thermistor coupled between the ends of the heating elements connected to the respective rectifiers.