이 특허를 인용한 특허 (44)

1. Lee Yong-ho,KRX ; Lee Mun-yong,KRX, Apparatus and method for making an automotive bumper beam.

   상세보기
2. Suzuki Katsuyoshi,JPX ; Yamamura Itaru,JPX ; Yamamoto Masahiko,JPX ; Furuno Yuzi,JPX ; Sugiura Tamotu,JPX ; Ishikawa Shigehide,JPX ; Suzuki Mineo,JPX, Apparatus for cutting a running workpiece.

   상세보기
3. Johnson, Thomas; Witte, Doug; Gatti, Daniel; Oxley, Brian; Malkowski, Brian, Apparatus for making tubular beam with center leg.

   상세보기
4. Tamura Tatsuya,JPX ; Ohkura Toshio,JPX ; Kano Yuko,JPX, Apparatus for producing rigid elongated member for use in vehicles.

   상세보기
5. Patton David L. ; Smith Nathaniel T., Basketball goal with expanded rim and drain hole.

   상세보기
6. Johnson, Thomas J.; Malkowski, Brian E.; Oxley, Brian P., Beam with varied bending moment, apparatus, and method.

   상세보기
7. Wilson, Brian S., Bending assembly for extruded stock material.

   상세보기
8. Walter Himsl ; Jeffrey J. Mellis, Bumper beam assembly and method.

   상세보기
9. Reierson,David E.; Johnson,Thomas J., Bumper beam having face with supported angled wall.

   상세보기
10. Reierson,David E.; Johnson,Thomas J., Bumper beam having face with supported angled wall.

    상세보기
11. Johnson, Thomas J.; Malkowski, Brian E.; Oxley, Brian P., Bumper reinforcement beam with varied bending moment.

    상세보기
12. Vianello Fortunato (Vallio di Roncade ITX) Moschini Dino (San Cipriano ITX), Calendering aluminum profiles for producing spacer frames for insulating glazing units.

    상세보기
13. Graber, Donald G., Cross member for vehicle bumper bar and method for making same.

    상세보기
14. Graber,Donald G., Cross member for vehicle bumper bar and method for making same.

    상세보기
15. Anderson Jeffrey A. ; Senior Robert B. ; Filipek Gregory J., D-section bumper.

    상세보기
16. Sturrus Peter ; Heinz Richard D. ; Briggs Kirk W., Die apparatus for cutting end of bumper bar.

    상세보기
17. Sturrus, Peter; Heinz, Richard D.; Briggs, Kirk W., Die apparatus for cutting end of bumper bar.

    상세보기
18. Perucca, Steven R.; Cherniausky, Jeffery S., Energy absorber for vehicle.

    상세보기
19. Graber, Donald G., Expandable link system and method of making same.

    상세보기
20. Heatherington David W. ; Lupone James, High flex bumper with reinforced corner end sections.

    상세보기
21. Lee, Mun-Yong; Seol, Hyun-Uk, Laser welding device for roll forming system and control method thereof.

    상세보기
22. Sundgren, Anders; Lindberg, Mats; Berglund, Goran, Method for manufacturing a bumper bar.

    상세보기
23. Hüffer, Stephan; Witteler, Helmut; Feβenbecker, Achim; Stellnberger, Karl-Heinz; Fleischanderl, Martin, Method for producing molded bodies from sheet steel galvanized on one or both sides.

    상세보기
24. Heinz, Richard D.; Gould, Bryan E., Method of forming three-dimensional multi-plane beam.

    상세보기
25. Liu, Lausan Chung-Hsin, Method of manufacturing loading plane border frame tubes for chairs.

    상세보기
26. Hamel,Kevin; Palanisamy,Kalyan; Palms,Charles Louis, Method of manufacturing, apparatus and resulting irregular shaped cross section tubes.

    상세보기
27. Heinz, Richard D.; Lyons, Bruce W.; Gould, Bryan E., Multi-directionally swept beam, roll former, and method.

    상세보기
28. Martini, Paul; Perucca, Steve; Fu, Mike, Multi-layer energy absorber.

    상세보기
29. Cumming, David M.; Gabbianelli, Gianfranco; Mellis, Jeffery J.; Uchiyama, Hiroshi, Multiple material bumper beam.

    상세보기
30. O'Farrell ; Jr. Frank B. ; Tomasino Alfred P. ; Orr Roy J. ; Buckingham Robert G. ; Hanover Barry K., One piece C-arm for X-ray diagnostic equipment.

    상세보기
31. Yamaguchi, Keiji; Nagaoka, Yasushi; Higashimachi, Naoya; Mase, Yusuke, Pedestrian collision detection sensor-equipped vehicle bumper structure.

    상세보기
32. Kondou, Takafumi; Ishino, Keiji, Pipe body and forming method of the same.

    상세보기
33. Kondou,Takafumi; Ishino,Keiji, Pipe body and forming method of the same.

    상세보기
34. Kondou,Takafumi; Ishino,Keiji, Pipe body and forming method of the same.

    상세보기
35. Heinz, Richard D.; Gould, Bryan E., Roll former with three-dimensional sweep unit.

    상세보기
36. Heinz, Richard D.; Gould, Bryan E., Roll former with three-dimensional sweep unit.

    상세보기
37. Lee, Mun Yong; Yoo, Jung Su, Roll forming apparatus, method thereof, and bumper beam manufactured by the method.

    상세보기
38. Jeong, Kwang-Wook; Son, Bong Kun, Roll forming method and shaped beam produced by using the same.

    상세보기
39. Marc Richard Johnson, Tube with extruded flanges holding wall-reinforcing insert.

    상세보기
40. Graber, Donald G., Tubular bar with integral rolled locking system and method of making same.

    상세보기
41. Graber, Donald G., Tubular bar with integral rolled locking system and method of making same.

    상세보기
42. Johnson, Thomas; Witte, Doug; Gatti, Daniel; Oxley, Brian; Malkowski, Brian; Ramamoorthy, Kannan; Pendergrass, Ed, Tubular beam with center leg and method for forming the same.

    상세보기
43. Higashimachi, Naoya; Mase, Yusuke; Nagaoka, Yasushi, Vehicle bumper structure including a pedestrian collision detection sensor.

    상세보기
44. Mellis Jay, Vehicle door reinforcing beam and method of making it.

    상세보기
더보기