초록 ▼

A process for disposing of sanitary sewage sludge by producing a pumpable slurry of sewage sludge with or without solid carbonaceous fuel and burning said slurry as fuel in a partial oxidation gas generator, furnace, or boiler. The aqueous slurry of sewage sludge is concentrated by removing water by

A process for disposing of sanitary sewage sludge by producing a pumpable slurry of sewage sludge with or without solid carbonaceous fuel and burning said slurry as fuel in a partial oxidation gas generator, furnace, or boiler. The aqueous slurry of sewage sludge is concentrated by removing water by means of a conventional belt filter press, centrifuge, or hydroclone. The dewatered slurry of sewage sludge is preheated and sheared; hydrothermally treated; and its solids content increased. A chelating agent, for example an aminopolycarboxylic acid or a hydrocarboxylic acid is mixed with the aqueous slurry of sewage sludge during the preheating and shearing step and/or the step for increasing its solids content. By means of the subject process, the viscosity of the slurry of sewage sludge with or without solid carbonaceous fuel is reduced and coagulation is suppressed. A pumpable aqueous slurry of sewage sludge with or without solid carbonaceous fuel is produced and burned with a free-oxygen containing gas in a partial oxidation gasifier, furnace, boiler, or incinerator to produce a hot raw effluent gas stream. In a preferred embodiment, the effluent gas stream is cleaned and purified and non-contaminating ash and slag are separated. By this process, noxious sewage sludge may be disposed of without contaminating the environment. By-product synthesis gas, reducing gas, or fuel gas may be produced.

대표청구항 ▼

A process for disposing of sewage sludge comprising: (1) concentrating an aqueous slurry of sewage sludge to a solids content in the range of about 5 to 35 wt. % to form a dewatered aqueous slurry of sewage sludge; (2) preheating and shearing the dewatered aqueous slurry of sewage sludge from (1) at

A process for disposing of sewage sludge comprising: (1) concentrating an aqueous slurry of sewage sludge to a solids content in the range of about 5 to 35 wt. % to form a dewatered aqueous slurry of sewage sludge; (2) preheating and shearing the dewatered aqueous slurry of sewage sludge from (1) at a temperature in the range of about 130°F. to 210°F. in the absence of air, and holding same at said elevated temperature for about 0.5 to 5.0 minutes; (3) heating the aqueous slurry of sewage sludge from (2) in the absence of air at a temperature in the range of about 300°F. to 450°F. and at a pressure above the vapor pressure of water at that temperature, and holding same at said elevated temperature for about 1.0 to 10.0 minutes; (4) hydrothermally treating the aqueous slurry from (3) in an autoclave in the absence of air and holding said material in said autoclave for about 30 to 90 minutes at a temperature in the range of about 475°F. to 550°F. and a pressure above the vapor pressure of water at that temperature; (5) increasing the solids content of the aqueous slurry of sewage sludge from (4) to about 30 to 58 wt. % to form a pumpable slurry of sewage sludge; (6) mixing a chelating agent in the amount in the range of about 0.05 to 1.0 wt. % with the aqueous slurry of sewage sludge in steps (2) and/or (5) to reduce the viscosity of the aqueous slurry of sewage sludge and to suppress coagulation; and (7) burning said pumpable slurry of sewage sludge from (5) in a partial oxidation gasifier, furnace, boiler, or incinerator to produce a hot raw effluent gas stream.