A liquid metal (49) poured into a filling chamber (20) is influenced in this chamber by a lower piston (43) and an upper piston (18), which are mounted on a lower machine table (5) and an upper machine table (10) respectively, which tables (5 and 10 respectively) support a lower mold part (24) and a
A liquid metal (49) poured into a filling chamber (20) is influenced in this chamber by a lower piston (43) and an upper piston (18), which are mounted on a lower machine table (5) and an upper machine table (10) respectively, which tables (5 and 10 respectively) support a lower mold part (24) and an upper mold part (22) respectively. The filling chamber (20) is disposed in or at the lower mold part (24) and receives, as regards the poured-in amount of metal, the lower piston (43), which is adjustable as to its elevational level and can be adjusted to make the amount of metal reach a level somewhat below the mold cavity (51) between the mold parts (22, 24). The lower piston (43) has a larger diameter than the upper piston (18), which, in connection with the filling of the metal (41), is designed to be lowered to a central position in a guiding and feeding sleeve (19) in the upper mold part (22) and is retained in this position by an adjustable holding force. The lower piston (43) is subsequently designed to be pressed upwards and carry out the basic feeding into the mold cavity (51), counteracted up to the holding force by the upper piston (18), which is designed to, in the final phase of the basic feeding, be actuated by a larger force and be lifted somewhat to an upper holding position. The upper piston (18) is designed to, subsequent to the pressing movement of the lower piston (43), be activated and lowered to a lower position, the final pressing being done, subsequent to which the mold parts (22, 24) are designed to be opened up and to release the casting.
대표청구항▼
A method of press casting in which a liquid metal (49) in a filling chamber (20) is displaced by a lower piston (43) mounted to a lower machine table (5), under the influence of an upper piston (18) mounted in an upper machine table (10), the tables (5 and 10) support a lower mold part (24) and an u
A method of press casting in which a liquid metal (49) in a filling chamber (20) is displaced by a lower piston (43) mounted to a lower machine table (5), under the influence of an upper piston (18) mounted in an upper machine table (10), the tables (5 and 10) support a lower mold part (24) and an upper mold part (22) respectively, said lower piston (43) is adjustable in the filling chamber (20) to cause the liquid metal to reach a desired level below a mold cavity (51) between the mold parts (22, 24) and has a larger diameter than the upper piston, characterized by the steps of: a) lowering the upper piston, subsequent to pouring of the liquid metal into the filling chamber, to a desired position in a guiding and feeding sleeve (19) in the upper mold part; b) biasing the upper piston to this desired position; c) moving the lower piston upwards in the filling chamber to feed the liquid metal into the mold cavity; d) applying sufficient upward feeding force by way of the lower piston and the liquid metal to the upper piston, once the mold cavity is full of the liquid metal, to move the upper piston upward against the bias; e) allowing the liquid metal to solidify; f) lowering the upper piston to a lower position; and g) opening the mold parts to release the casting. A press casting machine comprising: a stationary base plate (3) supporting an upper machine table (10) by hydraulic cylinders (7) for vertical movement relative to the base plate, the base plate and the upper machine table being supported above a lower machine table; the upper machine table (10) having an upper mold part (22) rigidly mounted to a lower surface thereof, a lower mold part (24) supported, beneath the upper mold part, by the upper machine table (10) (22) by hydraulic cylinders (3′) for vertical movement relative thereto, and an upper piston mounted in the upper machine table (1) that extends down into a guide sleeve (19) in the upper mold part that communicates with a mold cavity defined by the upper and lower mold parts (22,24); the lower machine table (5) having a filling chamber (20) for receiving a liquid metal (49) and a lower piston (43) mounted to the lower machine table (5) that extends upwards into the filling chamber (5) to fill the mold cavity (23,25) with the liquid metal under the influence of the upper piston (18), the lower piston (43) being adjustable from a first position adjacent an upper edge of the filling chamber (20) to a second position at a desired level below the upper edge of the filling chamber (20) to maintain the lowest pouring height possible during pouring of the liquid metal and to measure the desired amount of liquid metal.
연구과제 타임라인
LOADING...
LOADING...
LOADING...
LOADING...
LOADING...
이 특허를 인용한 특허 (18)
Ratte, Robert W.; Peterson, Norman E., Battery part.
Thomas ; deceased Robert Anthony ; Thomas ; legal representative by Margaretanne ; Thomas James B. ; Hale Roger, Pressurized squeeze casting apparatus and method and low pressure furnace for use therewith.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.