초록 ▼

A bearing failure detector for an electrical generator includes a disc located within the bearing assembly near the location of the main bearings. The disc includes an electrically conductive ring encased in an insulation layer. The ring is exposed along inside diameter of the detector disc adjacent

A bearing failure detector for an electrical generator includes a disc located within the bearing assembly near the location of the main bearings. The disc includes an electrically conductive ring encased in an insulation layer. The ring is exposed along inside diameter of the detector disc adjacent to the periphery of the shaft, but the dimensions of the inside diameter of the ring are slightly greater than the normal internal clearance of the main bearings, so that the shaft does not contact the ring unless the bearings are significantly worn. The detector ring is connected to a resistor with a large resistance which is monitored by a control circuit at all times. When the internal clearance of the main bearings has been enlarged by a predetermined amount, the ring contacts the shaft, changing the resistance monitored by the control circuit. This causes the control circuit to provide an indication that the bearings need replacement. The detector eliminates the need for preventive replacement of bearings at scheduled maintenance periods when the bearings may not actually need replacement because they are not sufficiently worn, saving service time and costs. Auxiliary bearings are provided to support the shaft when the shaft has contacted the detector, providing safe operation of the generator for a sufficient period of time after a bearing replacement indication has been provided until the bearing assembly is replaced.

대표청구항 ▼

An electrical generator which comprises: a housing assembly; a stator assembly fixedly mounted with respect to the housing assembly; a bearing assembly supported by housing assembly, the bearing assembly including main bearings having an internal clearance; a shaft supported for rotation in the bear

An electrical generator which comprises: a housing assembly; a stator assembly fixedly mounted with respect to the housing assembly; a bearing assembly supported by housing assembly, the bearing assembly including main bearings having an internal clearance; a shaft supported for rotation in the bearing assembly and extending through the housing assembly; a rotor assembly mounted on the shaft for rotation therewith inside the stator assembly; and a bearing failure detector comprising a ring of an electrically conductive material which encircles the shaft and having a central opening through which the shaft extends, the ring directly contacting the shaft when the internal clearance of the main bearings has been enlarged by a predetermined amount, which enlargement indicates the need for replacement of the bearings, a lead permanently affixed to the ring at a connection point for connecting the detector to a control circuit to electrically sense contact of the ring by the shaft, and a layer of electrically insulating material coating the ring to insulate the ring from components of the generator other than the shaft, the coating layer of electrically insulating material completely encasing the ring and the connection point except along the central opening where the ring is capable of directly contacting the shaft to expose the electrically conductive material around the entire periphery of the central opening.