초록 ▼

A container for storing hazardous waste material, particularly radioactive waste material, consists of a cylindrical body and lid of precipitation hardened C17510 beryllium-copper alloy, and a channel formed between the mated lid and body for receiving weld filler material of C17200 copper-beryllium

A container for storing hazardous waste material, particularly radioactive waste material, consists of a cylindrical body and lid of precipitation hardened C17510 beryllium-copper alloy, and a channel formed between the mated lid and body for receiving weld filler material of C17200 copper-beryllium alloy. The weld filler material has a precipitation hardening temperature lower than the aging kinetic temperature of the material of the body and lid, whereby the weld filler material is post weld heat treated for obtaining a weld having substantially the same physical, thermal, and electrical characteristics as the material of the body and lid. A mechanical seal assembly is located between an interior shoulder of the body and the bottom of the lid for providing a vacuum seal.

대표청구항 ▼

In a container comprising a lid and a cylindrical body, the improvement comprising a seal assembly included therewith for providing a seal between an internal shoulder of said cylindrical body and bottom of said lid screwed into an open top portion of the clindrical body, with the bottom of said lid

In a container comprising a lid and a cylindrical body, the improvement comprising a seal assembly included therewith for providing a seal between an internal shoulder of said cylindrical body and bottom of said lid screwed into an open top portion of the clindrical body, with the bottom of said lid being in relatively close proximity to a surface of said shoulder when said lid is screwed fully into the top of said cylindrical body, said seal assembly comprising: a soft non-corrosive metal coating on said shoulder; a metal disk having a substantially flat top side and a substantially flat bottom side; two concentric metal “O”-rings, each coated with a soft non-corrosive metal, rigidly affixed to the bottom side of said disk, whereby when said lid is screwed into said body, the bottom of said lid is rotated against the top side of said disk for compressing said metal “O”-rings into the plastic regime to flatten them against said shoulder of said body for providing a double “O”-ring seal therebetween.