초록 ▼

A method for the fabrication of three-dimensional macroporous polymer matrices for use as bone graft or implant material was developed. The composites are formed from a mixture of biodegradable, biocompatible polymer and hydroxyapatite (HA), a particulate calcium phosphate ceramic. The method leaves

A method for the fabrication of three-dimensional macroporous polymer matrices for use as bone graft or implant material was developed. The composites are formed from a mixture of biodegradable, biocompatible polymer and hydroxyapatite (HA), a particulate calcium phosphate ceramic. The method leaves irregular pores in the composite between 100 and 250 microns in size. In a preferred embodiment, implants are composed of a 50:50 poly(lactide-co-glycolide) (PLGA) polymer and reinforced by hydroxyapatite. Mechanical and histological analysis showed the matrix fabricated by this method to be structurally and mechanically similar to cancellous bone. Prior to degradation, pure polymer specimens exhibited an elastic modulus of 293 MPa and specimens which were 50% HA by weight exhibited a modulus of 1459 MPa. After six weeks of degradation under physiological conditions, the reinforcing effect of ceramic loading had diminished. Modulus of polymer matrices at all HA load levels had decreased sharply to approximately 10 MPa. Mean macro- and micropore diameters of the polymer specimens were 100 mm

대표청구항 ▼

A method for making a porous composite for repair or replacement of hone comprising hydroxyapatite mixed with a biodegradable, biocompatible polymer, wherein the pores have a diameter in the range of between approximately 100 and 250 microns comprising mixing hydroxyapatite particles having a partic

A method for making a porous composite for repair or replacement of hone comprising hydroxyapatite mixed with a biodegradable, biocompatible polymer, wherein the pores have a diameter in the range of between approximately 100 and 250 microns comprising mixing hydroxyapatite particles having a particle size in the range of approximately 10 and 100 microns in diameter with a non-aqueous solution of a biodegradable, biocompatible polymer dissolved in a polymer solvent, suspending particles of an inert leachable material with the hydroxyapatite particles, wherein the particles of inert leachable material have a diameter between approximately 100 and 250 microns and are not soluble in the polymer solvent, removing the polymer solvent, and removing the inert leachable material to yield a composite having pores with a diameter of at least 100 microns wherein the effective strength of the composite is a function of the hydroxyapatite:polymer ratio.