초록 ▼

Metal hydrides for absorbing hydrogen which are capable of undergoing repeated charge/discharge cycles of absorbing and desorbing hydrogen at high temperatures and cycles through a high temperature followed by a low temperature. These alloys are intended for use in devices such as heat pumps, heat e

Metal hydrides for absorbing hydrogen which are capable of undergoing repeated charge/discharge cycles of absorbing and desorbing hydrogen at high temperatures and cycles through a high temperature followed by a low temperature. These alloys are intended for use in devices such as heat pumps, heat exchangers, energy storage devices, thermal actuators, temperature sensors and electrochemical cells. The alloys generally comprise the chemical formula A1-xBx where A is selected from the group of elements consisting of Ti, Hf, Y, B is selected from the group of elements consisting of Nb, Ni, Co, and Fe, and x is in a range from 0.05 to approximately 0.80, and specific alloys comprise hafnium-nickel (HfNi), hafnium cobalt (HfCo), hafnium-iron (Hf2Fe), yttrium-nickel (YNi) and titanium-niobium Ti1-xNbx, where x is in a range of from 0.05<×<0.60. Optionally, additives such as Al, B, Co, Cr, Cu, Hf, Mn, Mo, Ni, Fe, Ga, Ge, Si, Sn, Ta, V and Zr may be added in proportions up to about 10 atomic percent relative to the base alloy set forth above to provide for specific customized applications. Also, methods of use for such high temperature disproportionation resistant alloys where the temperature is cycled through an elevated and a lower, sometimes room, temperature are disclosed.

대표청구항 ▼

An internal combustion engine powered vehicle system having an internal combustion engine and catalytic converter means for the reaction of pollutants contained in engine exhaust gas, said system including an arrangement for rapid pre-heating of said catalytic converter means during engine start-up

An internal combustion engine powered vehicle system having an internal combustion engine and catalytic converter means for the reaction of pollutants contained in engine exhaust gas, said system including an arrangement for rapid pre-heating of said catalytic converter means during engine start-up when the engine is cold, said arrangement comprising: a closed system of a low pressure metal hydride alloy heat exchanger containing a low pressure metal hydride composition and a high pressure metal hydride composition, said low pressure metal hydride composition consisting essentially of a binary intermetallic compound of one of the following general formulas: HfNi, HfCo, Hf2Fe, YNi or of a solid solution alloy having the formula Ti1-xNbx where x is in a range from 0.05 to approximately 0.80, said low pressure metal hydride composition being capable of resisting disproportionation at a temperature exceeding 150°C., said low pressure metal hydride composition providing the heat necessary for catalytic reaction of exhaust pollutants upon occlusion of hydrogen during an engine start-up period when said engine is cold, and means for effecting hydrogen flow upon engine start-up from the high pressure metal hydride alloy to the low pressure metal hydride composition and hydrogen flow from the low pressure metal hydride composition to the high pressure metal hydride alloy following said start-up period and after engine exhaust gases have attained a normal elevated operating temperature.