초록 ▼

A method of making a cast concrete stepping stone whose exposed upper surface has the appearance of two or more grouted attractive natural stepping stones. A liquid release agent is applied to the mold which is then placed on a vibrator table and filled with wet concrete. The mold is vibrated for ab

A method of making a cast concrete stepping stone whose exposed upper surface has the appearance of two or more grouted attractive natural stepping stones. A liquid release agent is applied to the mold which is then placed on a vibrator table and filled with wet concrete. The mold is vibrated for about 30 seconds and the surface of the concrete troweled smooth. Dry body color is sprinkled over the concrete surface and troweled to completely cover the concrete. A dry release agent containing powdered color having a darker shade than the body color is sprinkled over the dry body color covering the concrete. The desired pattern is then pressed into the surface of the concrete and after a six hour drying time, the cast stepping stone is removed from the mold. Excess body color and release agent are washed away and the washed surfaces totally dried. Finally a clear concrete sealer is applied to the exposed upper surface of the concrete stepping stone.

대표청구항 ▼

[ I claim:] [1.] A method of making a cast concrete stepping stone whose upper surface replicates a plurality of grouted together natural stones in which the casting is done in an open-topped mold having a flat bottom surface and a continuous sidewall made from a strip of polyvinyl chloride lying ed

[ I claim:] [1.] A method of making a cast concrete stepping stone whose upper surface replicates a plurality of grouted together natural stones in which the casting is done in an open-topped mold having a flat bottom surface and a continuous sidewall made from a strip of polyvinyl chloride lying edgewise on the mold's flat bottom surface with its opposite ends releasably held together during casting comprising:first apply a liquid release agent to the inside of the mold,place the mold on a vibrator table, fill the mold with wet concrete and trowel an upper surface of the wet concrete smooth,sprinkle dry body color consisting of 90% silica sand, 5% titanium dioxide binding agent and 5% powdered color over the upper surface of the concrete and lightly trowel until body color completely covers the concrete with a smooth consistant color,sprinkle dry colored release agent consisting of 95% powdered silicone and 5% powdered color having the same color as the body powdered color but a darker shade over the body color on the upper surface of the cast concrete,press a desired pattern into the surface of the semi-wet concrete,after six hours drying time, remove the cast concrete stepping stone from the mold,remove excess body color and release agent from the stepping stone using water and let the washed upper surface become totally dry, and thenapply clear concrete sealer to the upper surface of the cast concrete stepping stone.