초록 ▼

A process for producing a heat exchanger tube (1) with a highly porous surface structure, in particular for evaporating liquids from pure substances or mixtures on the outside of the tube. The process starts from a rolling operation, by means of which helical fins (2) are produced on the outside of

A process for producing a heat exchanger tube (1) with a highly porous surface structure, in particular for evaporating liquids from pure substances or mixtures on the outside of the tube. The process starts from a rolling operation, by means of which helical fins (2) are produced on the outside of the tube, which fins, in turn, are deformed in a plurality of compression steps by means of gearwheel-like compression wheels (6, 7) in such a manner that the projections (12a, 12b) formed in each case form a cover (3a) for the passages (3) which are situated between the fins (2). The high level of porosity is achieved as a result of the remaining pores (13) and/or slots (14).

대표청구항 ▼

[ We claim:] [1.] A process for producing a heat exchanger tube, in particular for the evaporation of liquids from pure substances or mixtures on the outside of the tube, having fins which run helically around the outside of the tube, are integral therewith, i.e. are formed out of the tube wall by w

[ We claim:] [1.] A process for producing a heat exchanger tube, in particular for the evaporation of liquids from pure substances or mixtures on the outside of the tube, having fins which run helically around the outside of the tube, are integral therewith, i.e. are formed out of the tube wall by working, and are deformed so as to form passages which are situated between the fins, in which process the following steps are carried out:a) helically running fins are formed on the outside of a smooth tube, the fin material being obtained by displacing material out of the tube wall by means of a rolling operation, and the finned tube which is formed is set in rotation by the rolling forces and/or is advanced in a manner which corresponds to the helical fins which are formed, the fins being formed out of the otherwise undeformed smooth tube with increasing height,b) in the region which is being deformed, the tube wall is supported by a roll mandrel which lies inside the tube,c) after they have been formed, the fins are subjected to a compression operation in order to form partially open passages between them, the fins being compressed by the radial compression depth X over their entire width in the axial direction, in a first compression step in sections in the circumferential direction, by means of a gearwheel-like compression wheel, so that fin material is displaced on both sides in the axial direction so as to form projections which form the first part of the passage cover,d) at least one further compression step with the radial compression depth Y is carried out over the entire width of the fins in the axial direction, by means of a gearwheel-like compression wheel, which radial compression depth Y is at least as great as the radial compression depth X in the first compression step, so that the passage cover is formed in a stepwise manner by joining together projections.