초록 ▼

Reheat of reheat regenerative steam power cycle increases its efficiency by increasing the average temperature of heat reception. In spite of such an increase in efficiency, reheating increases the irreversibility of feed water heaters by using superheated steam of a greater temperature difference i

Reheat of reheat regenerative steam power cycle increases its efficiency by increasing the average temperature of heat reception. In spite of such an increase in efficiency, reheating increases the irreversibility of feed water heaters by using superheated steam of a greater temperature difference in the regenerative cycle. This invention introduces some modifications to the regular reheat regenerative steam power cycle that reduces the irreversibility of the regenerative process. The invention applies reversible reheating in addition to the regular reheating and uses smaller temperature differences across feed water heaters than the regular cycle. A comparison study between the regular reheat regenerative cycle and the invented cycle is done. The results indicate that a gain in efficiency of up to 2.5% is obtained when applying invented cycle at the same conditions of pressure, temperatures, number of reheating stages, and feed water heaters. In addition, the invented cycle has some practical advantages associated with up to 50% reduction in the mass flow rate that is regularly reheated for the same output power. Such advantages such as less pressure drop and heat transfer loss. Such advantages allow us to use a greater number of reheating stages of the invented cycle for the same pressure drop and heat transfer losses of the reheater pipes of the regular cycle. Another practical advantage of the invented cycle over the regular cycle is higher heat transfer coefficients for the heat exchangers of the feed water heaters because they are mainly operated in the two-phase region. Such practical advantage results in smaller sizes for the heat exchangers of the invented cycle compared with the ones for the regular cycle.

대표청구항 ▼

1. An improved method of operation of a continuous combustion type power system comprising the steps:generating steam in a steam generator, driving a first large turbine by the generated steam from said steam generator, extracting portions of steam from said first large turbine for the purpose of he

1. An improved method of operation of a continuous combustion type power system comprising the steps:generating steam in a steam generator, driving a first large turbine by the generated steam from said steam generator, extracting portions of steam from said first large turbine for the purpose of heating feed water during a regeneration process that portions of steam are not reheated with the remainder portion of said generated steam that expand to lower pressures, allowing the last portion of said portions of steam extracted from said first large turbine to be dried in a first steam separator if said last portion was in the two-phase region, expanding dry steam output of steam separators in small turbines, allowing portions of the output of small turbines to be dried in steam separators except the output of the lowest pressure small turbine where its output heats the feed water heater that has the lowest pressure, allowing saturated water output of said steam separators to be mixed with water output of feed water heaters that have the pressures that are very close to the pressures in said steam separators, reheating said the remainder portion of said generated steam in one or more steps in said steam generator, allowing said the remainder portion of said generated steam to drive large turbines after reheating, condensing the output steam from the lowest pressure large turbine in a condenser that is cooled by any suitable working fluid, using a first pump for pumping the condensing water with increase in pressure, using a first feed water heater for heating the pumped water with outlet steam of the lowest pressure small turbine by direct or indirect contact with said pumped water, using other pumps for pumping the pumped water output of one feed water heater to the following feed water heater in a train of feed water heaters, using steam extracted from said first large turbine or using portions of the output of said small turbines to heat said pumped water in feed water heaters by direct or indirect contact with the pumped water so that as the steam is used for regeneration is expanding in a two-phase region to lower pressures, providing an expansion step in one of said small turbines and a drying step in one of said steam separators for each of said feed water heaters except the feed water heater if the expanded steam was in two-phase region that has the lowest pressure that is not connected with a steam separator.