초록 ▼

A manually operated dog treat dispensing machine capable of dispensing dog treats one at a time. The dispenser consist of a rectangular housing with a hinged housing door and hinged capital that serves as a food supply reservoir which is gravity fed into a spring loaded spindle chamber mounted on an

A manually operated dog treat dispensing machine capable of dispensing dog treats one at a time. The dispenser consist of a rectangular housing with a hinged housing door and hinged capital that serves as a food supply reservoir which is gravity fed into a spring loaded spindle chamber mounted on an axel and hand crank. Treats exit the dispenser through a chute output consisting of a hinged chute lid, two side walls and a base block. A retaining plate mounted in the end of the chute lid and adjacent to the spindle chamber acts as a stop preventing dispensing of more than one dog treat at a time. The dispenser can also function using a magazine that is inserted inside the rectangular housing area once the rear interior wall is changed out to accommodate the depth of the magazine. Magazine stop tabs at the base of the magazines along with the retaining plate mounted on the chute lid prevent the dispenser from dispensing more than one dog treat at a time. Once the rectangular housing unit is loaded with dog treats and the housing door and capital lid is closed and secured the dispenser is mounted to the wall. Operation of the dispenser is performed by manually turning the hand crank forward toward the operator 쩌 turn. With the crank mounted on the spindle axel, the spindle chamber now rotates forward and a dog treat is dispensed through the output chute with the return spring. pulling the spindle chamber back to the upright position and ready for a new treat.

대표청구항 ▼

I claim: 1. A magazine for the storing and dispensing of dog biscuits, the magazine comprising: a) a vertical chute having right and left side walls for storage of the dog biscuits in a uniform and orderly manner and for mating with a spindle chamber of a dispenser for dispensing of the dog biscuit

I claim: 1. A magazine for the storing and dispensing of dog biscuits, the magazine comprising: a) a vertical chute having right and left side walls for storage of the dog biscuits in a uniform and orderly manner and for mating with a spindle chamber of a dispenser for dispensing of the dog biscuits; b) said vertical chute having a shape molded to conform around a shape of the dog biscuits to keep the dog biscuits in a vertical position; c) a handle mounted at a top end of the magazine for loading of the magazine into the dispenser; d) a hook on a lip at the top end of the magazine used in conjunction with a slot opening at a bottom end of the magazine for mounting the magazine in the dispenser; e) located at the bottom end of the magazine on the right and left side walls is a curved out section for mating up with side walls of the spindle chamber; f) stop tabs on the bottom end of the magazine for preventing more than one of the dog biscuits from being dispensed at a time; wherein the magazine is retained within the dispenser such that a dog biscuit falls into the spindle chamber and the spindle chamber is rotated to dispense the dog biscuit. 2. The magazine as claimed in claim 1, further comprising cross supports on a front side for giving the magazine structural strength. 3. The magazine as claimed in claim 2, wherein quantity designation numbers on the cross supports. 4. The magazine as claimed in claim 1, further comprising quantity designation numbers on a rear interior wall. 5. The magazine as claimed in claim 1, further comprising a slot for fitting over a hold down screw on the dispenser. 6. The magazine as claimed in claim 1, wherein the magazine is preloaded with the dog biscuits. 7. The magazine as claimed in claim 6, further comprising a stop tape for preventing the dog biscuits from falling out of the magazine prior to use. 8. A magazine for the storing and dispensing of dog biscuits preloaded into the magazine, the magazine comprising: a) a vertical chute having right and left side walls for storage of the dog biscuits in a uniform and orderly manner and for mating with a spindle chamber of a dispenser for dispensing of the dog biscuits; b) said vertical chute having a shape molded to conform around a shape of the dog biscuits to keep the dog biscuits in a vertical position; c) a handle mounted at a top end of the magazine for loading of the magazine into the dispenser; d) a hook on a lip at the top end of the magazine used in conjunction with a slot opening at a bottom end of the magazine for mounting the magazine in the dispenser; e) located at the bottom end of the magazine on the right and left side walls is a curved out section for mating up with side walls of the spindle chamber; f) stop tabs on the bottom end of the magazine for preventing more than one of the dog biscuits from being dispensed at a time; and g) a stop tape for preventing the dog biscuits from falling out of the magazine prior to use; wherein the magazine is retained within the dispenser such that a dog biscuit falls into the spindle chamber and the spindle chamber is rotated to dispense the dog biscuit. 9. The magazine as claimed in claim 8, further comprising cross supports on a front side for giving the magazine structural strength. 10. The magazine as claimed in claim 9, wherein quantity designation numbers on the cross supports. 11. The magazine as claimed in claim 8, further comprising quantity designation numbers on a rear interior wall. 12. The magazine as claimed in claim 8, further comprising a slot for fitting over a hold down screw on the dispenser.