초록 ▼

A perforating gun assembly for a monobore application eliminates a full bore isolation valve or other component that has a limiting internal or external dimension and is designed to remain in position after firing. The assembly is run into the hole on a string with a running tool and left in positio

A perforating gun assembly for a monobore application eliminates a full bore isolation valve or other component that has a limiting internal or external dimension and is designed to remain in position after firing. The assembly is run into the hole on a string with a running tool and left in position with the string and the running tool removed. Pressure pulses communicate with a detonation control system to open a poppet to pressurize a chamber with a firing head. It should be noted that other types firing heads can also be utilized to initiate detonation in the system. Detonation clears the gun internals for flow and opens a gun valve that has no reduction in drift dimension as compared to the gun internal path after detonation. Production takes place through and around the gun. The top of the gun can be entered for future intervention work.

대표청구항 ▼

1. A perforating method for a borehole to a subterranean location, comprising: locating a perforating gun assembly at a predetermined location with a running string;firing said assembly when supported by said running string;releasing said running string from supporting said gun assembly after said f

1. A perforating method for a borehole to a subterranean location, comprising: locating a perforating gun assembly at a predetermined location with a running string;firing said assembly when supported by said running string;releasing said running string from supporting said gun assembly after said firing,running in a production string with an isolation device extendable onto a borehole tubular at a spaced location from said predetermined location of said gun assembly;producing fluids through, around and beyond a length of said assembly from at least one surrounding formation with said assembly remaining in place after said firing. 2. The method of claim 1, comprising: blowing out an end plug from said assembly due to said firing. 3. The method of claim 2, comprising: providing a re-entry guide with external flutes at a connection location for said running string. 4. The method of claim 3, comprising: defining exterior flow channels with said flutes;directing fluid flowing outside said assembly through said channels. 5. The method of claim 1, comprising: providing a gun valve in said assembly which in the open position upon said firing does not reduce drift dimension through said assembly. 6. The method of claim 5, comprising: locating said assembly in a monobore borehole. 7. The method of claim 1, comprising: setting an anchor for said assembly before said firing. 8. The method of claim 7, comprising: providing at least one external isolator for said borehole mounted to said assembly. 9. The method of claim 8, comprising: allowing said isolator to swell to block said borehole. 10. The method of claim 9, comprising: firing said assembly with said anchor set before said isolator swells to seal against said borehole. 11. The method of claim 8, comprising: locating said assembly in a monobore borehole. 12. The method of claim 7, comprising: using a running string to initially position said assembly for said firing;releasing said running string after setting said anchor and before said firing. 13. The method of claim 12, comprising: using pressure pulses to accomplish said firing. 14. The method of claim 1, comprising: providing at least one external isolator for said borehole mounted to said assembly. 15. The method of claim 14, comprising: allowing said isolator to swell to block said borehole. 16. The method of claim 14, comprising: providing a plurality of spaced apart isolators on said assembly. 17. The method of claim 1, comprising: locating said assembly in a monobore borehole. 18. The method of claim 1, comprising: using pressure pulses to accomplish said firing.