PLZT 전자광학 소자의 투과도 개선에 관한 연구 A Study on the Improvement of Transparency in the PLZT Electro-optic Ceramics.원문보기
보고서 정보
주관연구기관
광운대학교 Kwangwoon University
연구책임자
이영희
참여연구자
박태곤
보고서유형
최종보고서
발행국가
대한민국
언어
한국어
발행년월
1985-05
주관부처
과학기술부
사업 관리 기관
광운대학교 Kwangwoon University
등록번호
TRKO200200011418
DB 구축일자
2013-04-18
초록▼
본 연구에서는 CP (Chemical Preparation) 방법으로 시료를 준비하여, 산소분위기에서 PLZT 세라믹을 제조하였다. 시편의 조성비는 Pb?(sub)(-X)La(sub)(x) (Zr?(sub)(-y), Ti(sub)(y))?(sub)(-x)/?O? 식에 따라 메모리 영역에 속하는 x=8, y=65 로 하였고, 소결온도는 1200℃와 1250℃ 소결시간은 30시간에서 70시간까지 변화시켰다. 그리고 제조된 시편의 전기적 성질, 소결밀도, 광투과도등을 측정하여 소결조건을 조하였다. 실험결과 광투과도는 소결시 산
본 연구에서는 CP (Chemical Preparation) 방법으로 시료를 준비하여, 산소분위기에서 PLZT 세라믹을 제조하였다. 시편의 조성비는 Pb?(sub)(-X)La(sub)(x) (Zr?(sub)(-y), Ti(sub)(y))?(sub)(-x)/?O? 식에 따라 메모리 영역에 속하는 x=8, y=65 로 하였고, 소결온도는 1200℃와 1250℃ 소결시간은 30시간에서 70시간까지 변화시켰다. 그리고 제조된 시편의 전기적 성질, 소결밀도, 광투과도등을 측정하여 소결조건을 조하였다. 실험결과 광투과도는 소결시 산소를 주입시킨 시편이 산소를 주입하지 않은 시편보다 우수한 것으로 나타났다. 1250℃에서 60시간 소결한 시편의 경우 광투과도가 43%로 가장 우수하게 나타났으며, 소결밀도는 7.421 g/㎤ 기초흡수대는 370 nm 파장에서 발생하였다. 1250℃ 에서 60시간 소결한 시편의 비유전상수는 4729, 큐리온도는 110℃ 전기기계 결합계수는 0.49로 나타났다. 1250℃ 에서 60시간 소결한 시편의 잔류분극은 30.3μc/㎠ 항전력은 8.64 KV 였으며, 잔류분극과 항전력은 온도가 증가함에 따라 감소하였다.
Abstract▼
In this study, PLZT ceramics were fabricated by CP ( Chemical-Preparation) method and 0 gas atmosphere method. According to the Pb?(sub)(-x)La(sub)(x) (Zr?(sub)(-y), Ti(sub)(y))?(sub)(-x)/?O? fomula, the composition of specimen was x=0.08, y=0.65 in memory region. The sintered temperature, tim were
In this study, PLZT ceramics were fabricated by CP ( Chemical-Preparation) method and 0 gas atmosphere method. According to the Pb?(sub)(-x)La(sub)(x) (Zr?(sub)(-y), Ti(sub)(y))?(sub)(-x)/?O? fomula, the composition of specimen was x=0.08, y=0.65 in memory region. The sintered temperature, tim were varied from 1200? to 1250?, from 30 hr to 70 hr, respectively. The best optimal sintered conditions were investigated as a function of the electrical property, the sintered density and the optical transmittance. As the result of the experiment, the specimen fabricated by flowing 0? gas were represented the proper characteristics than the specimen fabricated by no flowing 0? gas. The S-9 specimen, sintered at 1250℃ for 60 hr, was showed the most excellent optical transmittance ( 43 % ), the sintered density (7.421 g/㎤) and the fundamental absorption edge ( 370 nm ). The dielectric constant of the specimen which sintered at 1250℃ for 60 hr was 4729, Curie point was 110℃ and electro-mechanical coupling factor was 0.49. The remanent polarization of the specimen which sintered at 1250℃ for 60 hr was 30.3μc/㎠ , the coercive field was 8.64 KV, the remanent polarization and coercive field decreased with increasing of the temperature.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.