1. 오이 덩굴손의 선회운동에 미치는 온도 및 광의 영향과 지지물에 대한 선택성을 규명하기 위한 실험결과를 요약하면 다음과 같다. 1.1 년중 PEN에 대한 접촉선회율은 6-9월 사이에 100% 가까운 매우 높은 반응을 나타났으며, 10-5월 사이는 50%이하의 저조한 경향을 보였다. 1.2 오이 덩굴손의 신장, 접촉선회 및 자유선회 속도는 저온보다는 고온에서, 약광보다는 강광에서 빠르게 진행하였다. 1.3 오이 덩굴손의 생육온도에 따라 선회운동이 매우 민감한 반응을 나타내어, 높은 광도와 수광시간이 길수록 선회운동이
1. 오이 덩굴손의 선회운동에 미치는 온도 및 광의 영향과 지지물에 대한 선택성을 규명하기 위한 실험결과를 요약하면 다음과 같다. 1.1 년중 PEN에 대한 접촉선회율은 6-9월 사이에 100% 가까운 매우 높은 반응을 나타났으며, 10-5월 사이는 50%이하의 저조한 경향을 보였다. 1.2 오이 덩굴손의 신장, 접촉선회 및 자유선회 속도는 저온보다는 고온에서, 약광보다는 강광에서 빠르게 진행하였다. 1.3 오이 덩굴손의 생육온도에 따라 선회운동이 매우 민감한 반응을 나타내어, 높은 광도와 수광시간이 길수록 선회운동이 촉진되었다. 1.4 지지물의 종류에 따라서 선회율의 차이가 많은 것으로 나타났는데, 합성수지물인 PEN의 지지물 보다는 식물성인 대나무 지지물에 접촉선회율이 높았다. 1.5 덩굴손의 접촉선회율은 오이와 참외에서 약36%, 호박과 완두에서 95%로 각각 나타났다. 2. 오이 덩굴손의 접촉선회와 생장조절물질의 관계를 규명하기 위한 연구결과를 요약하면 다음과 같다. 2.1 덩굴손의 생육단계별 생장조절물질은 IAA가 가장 많이 검출되었고, 다음으로 TTP, IBA순으로 나타났으며, 특히 접촉선회가 잘 되는 중기에서 IAA함량이 현저하게 많았다. 2.2 기부보다는 접촉선회운동이 나타나는 선단에서 IAA가 2배에 가까운 높은 함량을 나타내어 덩굴손내에 접촉선회운동을 하는 생장조절물질은 IAA가 지배적으로 작용하는 것으로 나타났다. 2.3 비접촉선회에서는 IAA가 5.26ppm, 접촉선회후의 덩굴손에서는 4.25ppm이 검출되었지만 IBA와 TTP는 차이가 없었다. 2.4 계절별로는 8월에 생장조절물질이 가장 높은 IAA의 함량을 보였고, 다음으로 10월, 12월순으로 나타났다. 2.5 저온보다는 고온에서 IAA함량이 현저하게 높았지만 광도간에는 차이가 없었다. 2.6 생장조절물질을 외부에서 처리했을 경우 IAA는 100%의 접촉순회를 하였지만, IBA와 NAA는 63%내외로 나타났고, GA는 반응이 거의 없었다. 3. 오이 덩굴손의 지지물에 접촉선회반응에 대한 환경요인과 선택적 선회운동에 관하여 연구한 결과는 다음과 같다. 3.1 생육온도가 높아짐에 따라서 접촉선회율도 높은 경향을 나타냈으며, 특히 대나무 지지물에는 25/30℃에서 생육한 오이 덩굴손은 100%에 가까운 접촉선회율을 나타냈으나, PEN에서는 약 50%의 선회율을 나타냈다. 3.2 오이 덩굴손의 접촉선회운동은 온도가 가장 민감한 반응을 하고 민감와 일장은 상호보존적인 역할을 하는 것으로 나타났다. 3.3 식물성, 금속류의 지지물에서는 접촉선회율이 높았는데 합성수지 지지물, 특히 PEN에서는 현저하게 낮았다. 4. 정전기를 소거시킨 지지물에 대한 오이 덩굴손의 접촉선회율과 새로 개발된 합성수지 지지물의 접촉선회반응 및 지속효과를 관찰한 결과를 요약하면 다음과 같다. 4.1 접지에 의한 대전방지의 효과에서 접촉선회율은 촉진되었으며, 접지로부터 거리가 멀어 질수록 선회율은 감소되었다. 4.2 건조한 지지물 보다는 수분을 함유한 지지물에서 접촉선회율이 약 20% 가까이 증가되어 오이 덩굴손의 지지물에 대한 접촉선회를 방해하는 것은 지지물의 정전기 발생 때문인 것으로 확인되었다. 4.3 대전방지제인 pizon, KK-2, Antinol-505 및 Anti-SEN I 용액에 침지하여 사용했을 때 약 20여일간 접촉선회의 촉진효과가 지속되었다. 4.4 새로 개발된 합성수지 지지물에서 첨가제의 농도가 높을수록 접촉선회율이 증가되어 0.33%부터는 접촉선회율이 87%의 촉진효과가 있었다. 또한 제조 1년후에도 접촉선회운동이 계속 촉진되는 효과가 있었다.
Abstract▼
1. The objectives of the study is to determine the effects of temperature and light on the contact coiling of cucumber tendril over supporting materials and to select suitable supporting materials. 1.1 When polyethylene net(PEN) was used for supporting material the contact coiling rate of cucumber t
1. The objectives of the study is to determine the effects of temperature and light on the contact coiling of cucumber tendril over supporting materials and to select suitable supporting materials. 1.1 When polyethylene net(PEN) was used for supporting material the contact coiling rate of cucumber tendril was shown very high, approximately 100%, during the period of June to September whereas it was lower than 50% during the period of October to May of coming year. 1.2 The speed of tendril elongation and the rate of contact and free coiiing were higher at high tecperatures and under high light intensity conditions. 1.3 Cucumber tendrils reacted very sensitively to the growing temperature with regard to the movement of contact coiling. The speed of contact coiling was promoted by high light intensity and long day conditions. 1.4 Marked differences were observed in the contact coiling rate depending on the kinds of supporting materials. The contact coiling rate was highter when the plant material (bamboo) was used as compared to the synthetic, material (PEN). 1.5 Contact coiling rate of tendrils of cucumber as well as oriental meion was around 36%, wilereas it was about 95%for squash and pea. 2. Relationships betweerl the contact coiling and endogenous auxin of cucumber tendrils were evaluattd. 2.1 Through the growing stages of tendril the quantity of IAA extracted was th greatest fol lowing by TTP, IBA. The content of IAA was particulary pronounGed at the middle stage of tendril. 2.2 The quantity of IAA extracted was high by twofold value at the end of tendril as compared with that at the basal part of tendril indicating that IAA contained in tendril is concerned mainly with the movement of contact coiling. 2.3 In case of non-contact coiling IAA was extracted by the contcnt of 5.26ppm whereas 4.25ppm content for the case of contact coiling. But there was no significant difference in content between IBA and TTP. 2.4 Based on seasons the highest content of IAA was measured in August followed by October and December. 2.5 Although the content of IAA was markedly higher at high temperature than at lower temperature no difference was found between light intensities. 2.6 When tendrils were treated by IAA contact coiling of 100% occurred. But there was lower contact coiling (63%) when IBA and NAA wtre used as growth regulator of tendril. And there was no response when GA was treated for it. 3. Rate of contact coiling of tendrils on supporting materials was around 36% for cucumber (Cucumis sativus L.) and oriental melon (Cucumis melo L.) and 95% for squash (Cucurbita moschata Duoh.) and pea (Pisum sativum L.). with the rise of growing temperature the of contact coiling of tendrils appeared to increase. Especially when bamboo was used for supporting materials the rate of contact coiling of crops grown at 25/30℃ increased almost to 100%, which 50% was observed for PEN supportirlg materials. Temperatyre, and light be most sensitive to the coiling movement of cucuber tendril, and light intensity and daylength played a significant complementary role in the contact coiling of cucumber tendrils. Using the plant matrials and metals for supporting materials the rate of tendril coiling was found high ; whereas it was considerably low when the synthetic resin was used for supporting materials. 4. In order to examine the response of contact coiling of cucumber tendril on tht newly developed supporting materials of syntlletic resin as well as the retaining effect of it and to estimate the rate of contact coiling on the supporting materials where static electricity was removed we conducted a study and obtained some results. 4.1 The rate of contact coiling was accelerated when the supporting materials was prevented from static electricity by earthing. It was reduced as the supporting materials were installed fathtr from the earthing. The rate of contact coiling increased by 20% on the moistened supporting materials as compared with on the dried ones indicating that the interference of contact coiling of cucumber tendril is due to the occurrence of static electricity on the supporting materials. 4.2 When the supporting materials were used after digestion in the compounds preventing from electrical charge such as pigeon, KK-2, and Antinol-505 the contact coiling lasted for about 20 days. With the increase of the intensity of added compound the rate of contact coiling on the ntwly made supporting materials of synthetic resin rose to 87% for the solution of 0.33% of added compound. Even one year after the supporting materials were made the movement of contact coiling was consistent.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.