보고서 정보
주관연구기관 |
포항공과대학교 Pohang University of Science and Technology |
연구책임자 |
서석환
|
참여연구자 |
조현보
,
조정훈
,
홍희동
,
정대혁
,
김성구
,
이병언
,
이소민
,
천상욱
,
이현수
,
이영훈
,
이승쾌
,
송은경
,
임충일
,
박선주
,
안준후
,
손성민
|
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2002-09 |
주관부처 |
보건복지부 |
사업 관리 기관 |
포항공과대학교 Pohang University of Science and Technology |
등록번호 |
TRKO200300002050 |
DB 구축일자 |
2013-04-18
|
키워드 |
STEP-NC.ISO 14649.자율제어 CNC 기술.CAD-CAM-CNC 체인.Soft-NC 기술.STEP-NC.ISO 14649.Autonomous CNC control.CAD-CAM-CNC Chain.Soft-CNC.
|
초록
▼
STEP-NC는 인터넷 기반의 E-manufacturing시스템을 지원하는 CAD-CAM-CNC체인을 대상으로하며, 이 기술의 핵심은 신언어 제정 및 interface 기술과 이를 기반으로 하는 요소기술 개발과 이를 CNC제어시스템의 형태로 구현하는 것이다. 본 연구 시작 당시의 세계적 STEP-NC 관련기술은 STEP-NC에 사용될 데이터모델의 표준규격만이 (그것도 밀링가공을 대상으로 초안 수준) 공표된 상태였으며, 이를 어떻게 구현하는 가에 대해서는 전적으로 개발자에 달린 베일에 쌓인 상태였다. 이러한 상황에서 "선반가공"을 대
STEP-NC는 인터넷 기반의 E-manufacturing시스템을 지원하는 CAD-CAM-CNC체인을 대상으로하며, 이 기술의 핵심은 신언어 제정 및 interface 기술과 이를 기반으로 하는 요소기술 개발과 이를 CNC제어시스템의 형태로 구현하는 것이다. 본 연구 시작 당시의 세계적 STEP-NC 관련기술은 STEP-NC에 사용될 데이터모델의 표준규격만이 (그것도 밀링가공을 대상으로 초안 수준) 공표된 상태였으며, 이를 어떻게 구현하는 가에 대해서는 전적으로 개발자에 달린 베일에 쌓인 상태였다. 이러한 상황에서 "선반가공"을 대상으로 "데이터 모델의 개발"에서부터 "working 가능한 자율제어형 STEP-NC 개발"은 상당히 미래지향적인 challenging 한 것이었다.
1단계 2년간은 이의 구현을 위한 infra연구 (2단계는 1단계의 infra 연구를 바탕으로 본 연구의 최종 목표인 "선반용" "자율제어형"에 집중)로서: 1) STEP-NC 관련 데이터 모델의 전반적인 분석, 2) 각종 STEP-NC 요소기술 (STEP-NC 제어기 구조 설계, SfP 시스템 연구, TPG 등) 연구, 3) 구현에 필요한 제반 요소기술 (Interpreter, Scheduler, Soft-NCK/PLC 등), 4) 기본형 밀링용 시제품 Korea STEP-NC 개발, 5) 선반용 STEP-NC 데이터 모델 연구, 6) 기본형 선반용 STEP-NC 기술 일부 (SFP & TPG) 구현 연구를 수행하였다. 이와 더불어 연구 결과는 7) 밖으로는 ISO 기술운영회 (TC184 SC1 & SC4)에 발표 한국 기술의 성가를 높임과 동시에 본 연구의 방식을 국제 표준에 반영시켰으며 (ISO 14649 Part 10, 11, 12, 121), 8) 국내적으로는 다양한 채널 (홈페이지, 기술세미나, 학회특별세션, 기술교육, 시제품 전시 등)을 통해 STEP-NC 기술의 산학연에 보급을 하였다.
Abstract
▼
STEP-NC is a new manufacturing paradigm for the internet-based E-manufacturing, especially for the CAD-CAM-CNC chain. The core of this is establishing a new data model international standard (formalized as ISO 14649) and development of STEP-NC system based on ISO 14649. At the time that this researc
STEP-NC is a new manufacturing paradigm for the internet-based E-manufacturing, especially for the CAD-CAM-CNC chain. The core of this is establishing a new data model international standard (formalized as ISO 14649) and development of STEP-NC system based on ISO 14649. At the time that this research was started 2 years ago (June 2000), a CD version of data model for STEP-NC was available for milling operation. Although a couple of STEP-NC prototypes for milling operation were reported later in 2000, our research target, "Development of autonomous STEP-NC for turning," was very challenging (at that time STEP-NC data model for turning was not available). Our research scope was very comprehensive encompassing: development of STEP-NC data model for turning, implementation of the data model, development of core modules for autonomous control, and prototype turning STEP-NC.
The focus of the first Phase of this research (carried out for 2 years between June 2000 and June 2002) was to establish the infrastructure of the final target including: 1) Analysis of ISO14649 and related data model, 2) Core modules for developing STEP-NC system (architecture design, SFP, TPG), 3) Implementation technology (interpreter, scheduler, Soft-NCK/PLC), 4) Development of Korea STEP-NC milling system, 5) Development of STEP-NC data model for turning, 6) Research on modules for turning STEP-NC system (SFP, TPG). The research results were reported to the international expert society including ISO TC184 SC1 and SC4, obtaining the following achievements: 1) Jointly with ISW (University of Sttugart) of Germany, our data model for turning was accepted as CD version of ISO 14649 Part 12 and 121 (by ISO TC184 SC1, August 2002), 2) Our propositions for the milling data model was in part incorporated in FDIS version of ISO 14649 Part 10, 11, 111), 3) Korea STEP-NC was presented and demonstrated in various international conventions, which will be used as a reference STEP-NC system.
The first Phase research will be used as the basis in the Second Phase research to be carried out for the next 3 years between June 2002 and June 2005.
목차 Contents
- 제 1 장 연구개발과제의 개요...10
- 제 1 절 서론...10
- 제 2 절 연구 개발 과제의 목표 및 내용...10
- 제 3 절 연구개발의 필요성...12
- 1. 기술적 측면...12
- 2. 경제ㆍ산업적 측면...13
- 제 2 장 국내외 기술 개발 현황...15
- 제 1 절 국외의 연구 개발 실적...15
- 제 2 절 국내의 연구 개발 실적...15
- 제 3 절 현 기술상태의 취약성...16
- 제 4 절 앞으로의 전망...16
- 제 3 장 연구개발 수행 내용 및 결과...17
- 제 1 절 STEP-NC 관련 데이터 모델 분석...17
- 제 2 절 STEP-NC 요소기술...18
- 1. STEP-NC 제어기 구조 설계...18
- 2. SFP 시스템 연구...18
- 3. 공구경로 생성기 (TPG: Tool Path Generator)...19
- 4. 기타 구현에 필요한 요소기술...20
- 제 3 절 Korea STEP-NC 개발...20
- 제 4 절 선반용 STEP-NC 데이터 모델 연구...22
- 제 5 절 선반용 STEP-NC 기술...23
- 1. 선반용 SFP...23
- 2. 선반용 TPG...25
- 제 6 절 국제활동 및 ISO 인증...27
- 제 4 장 목표 달성도 및 관련분야에의 기여도...29
- 제 5 장 연구개발 결과의 활용 계획...31
- 제 6 장 참고문헌...34
- 특정연구개발사업 연구결과 활용계획서...35
- [첨부1.] 연구결과 활용계획서...36
- [첨부2.] 기술 요약서...47
※ AI-Helper는 부적절한 답변을 할 수 있습니다.