보고서 정보
주관연구기관 |
한전기공(주) Korea Plant Service & Engineering |
연구책임자 |
박기태
|
참여연구자 |
김원경
,
최명준
,
옥현석
,
이준호
,
오의환
,
추길호
,
이상백
,
신춘섭
,
이창석
,
구교웅
|
보고서유형 | 2단계보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2006-03 |
과제시작연도 |
2005 |
주관부처 |
과학기술부 |
사업 관리 기관 |
한국과학재단 Korea Science and Engineering Foundtion |
등록번호 |
TRKO200600001767 |
과제고유번호 |
1350011569 |
사업명 |
원자력연구개발중장기계획(기금) |
DB 구축일자 |
2013-04-18
|
키워드 |
증기 발생기.전열관 정비.세관 인출.시편인출.관막음 제거.Steam Generator.Tube Repair.Tube Pull.Segment Removal.Plug Removal.
|
초록
▼
1. 연구개발목표 및 내용
● 가동 원전 증기발생기 전열관 인출 기술 개발 및 공정 자격부여
● 가동 원전 증기발생기 전열관 플러그 제거 기술 개발 및 공정 자격부여
● 증기발생기 전열관 In Situ Test 공정 원격자동화 및 적용
2. 연구결과
● 가동 원전 증기발생기 전열관 플러그 제거 기술 개발 및 공정 자격부여
- 7/8 inch, Inconel 690 Rolled Plug to Inconel 600 Tube (울진 1, 2호기)
- 3/4 inch, Inconel 690 Rolled
1. 연구개발목표 및 내용
● 가동 원전 증기발생기 전열관 인출 기술 개발 및 공정 자격부여
● 가동 원전 증기발생기 전열관 플러그 제거 기술 개발 및 공정 자격부여
● 증기발생기 전열관 In Situ Test 공정 원격자동화 및 적용
2. 연구결과
● 가동 원전 증기발생기 전열관 플러그 제거 기술 개발 및 공정 자격부여
- 7/8 inch, Inconel 690 Rolled Plug to Inconel 600 Tube (울진 1, 2호기)
- 3/4 inch, Inconel 690 Rolled Plug to Inconel 600 Tube (울진 3, 4호기, 영광 3, 4호기)
- 11/16 inch, Inconel 690 Rolled Plug to Inconel 600 Tube (고리 2, 3, 4호기, 영광 1, 2 호기)
● 가동 원전 증기발생기 전열관 인출 기술 개발 및 공정 자격부여
- 7/8 inch, Inconel 600 Tube (울진 1, 2호기)
- 3/4 inch, Inconel 600 Tube (울진 3, 4호기, 영광 3, 4호기)
- 11/16 inch, Inconel 600 Tube (고리 2, 3, 4호, 영광 1, 2 호기)
● 증기발생기 전열관 In Situ Test 공정 원격자동화
3. 기대효과 및 활용방안
● Qualification 및 현장정비절차서 개발하여 가동 원전 현장 적용 기반 확보
● 외국인 기술 용역에 의존하던 증기발생기 전열관 정비기술 자립화를 통한 외화 절감
● 증기발생기 전열관 정비기술 국산화 기반 확보
Abstract
▼
● Development of Plug Removal System for operating steam generators.
- 7/8 inch, Inconel Roll Plug for Ulchin unit 1 & 2
- 3/4 inch, Inconel Roll Plug for Ulchin unit 3 & 4, YongGwang unit 3, 4, 5 & 6
- 11/16 inch, Inconel Roll Plug for Kori unit 2, 3 & 4, YongGwang unit 1 & 2
● Developm
● Development of Plug Removal System for operating steam generators.
- 7/8 inch, Inconel Roll Plug for Ulchin unit 1 & 2
- 3/4 inch, Inconel Roll Plug for Ulchin unit 3 & 4, YongGwang unit 3, 4, 5 & 6
- 11/16 inch, Inconel Roll Plug for Kori unit 2, 3 & 4, YongGwang unit 1 & 2
● Development of Tube Pull System for operating steam generators.
- 7/8 inch, Inconel Poll Plug for Ulchin unit 1 & 2
- 3/4 inch, Inconel Roll Plug for Ulchin unit 3 & 4, YongGwang unit 3, 4, 5 & 6
- 11/16 inch, Inconel Roll Plug for Kori unit 2, 3 & 4, YongGwang unit 1 & 2
● Development of In Situ Pressure Test Automation
In phase I, All of hardware systems were required to horizontal operated design for horizontally layed down Kori 1 retired steam generator. To apply these systems to operating steam generators installed vertical position, all of hardware systems should be designed and manufactured in vertical operational systems. Qualifications were required to apply steam generator in nuclear power plants for each systems. Field operation procedures were also needed for field operations. In phase II, The repair systems have modified to vertical operation designs for application of operating steam generators from horizontal operation designs used for retired steam generator laying down horizontally. Plug Removal System qualification have developed and targeted of 11/16 inch, 3/4 inch and 7/8 inch tubes of steam generators. And field operation procedures for plug removal have been developed. Tube pull system have developed and targeted of 11/16 inch, 3/4 inch and 7/8 inch tubes of steam generators. And field operation procedures for tube pull have been developed. For In Situ Pressure Test system, modifications have peformed for remote operable system and prepared data acquisition software.
목차 Contents
- 표지...1
- 제출문...2
- 보고서 초록...3
- 요약문...4
- SUMMARY...7
- 목차...10
- 제 1 장 연구개발과제의 개요...13
- 제 1 절 연구개발의 목적 및 필요성...13
- 1. 연구개발의 경제, 산업적 측면...13
- 2. 연구개발의 사회, 문화적 측면...13
- 가. 방사선 피폭저감을 통한 원자력산업 대국민 신뢰성 확보...14
- 나. 중기발생기 유지, 보수, 관리기술의 Data Base 확보로 원전 가동기술 선진화...14
- 3. 연구개발의 기술적 측면...14
- 가. 증기발생기 전열관 WEG Roll Plug 제거 기술 (Steam Generator WEG Roll Plug Removal Technology)...15
- 나. 증기발생기 전열관 인출기술 (Steam Generator Tube Removal Technology)...16
- 다. In-Situ Pressure Test 기술...17
- 제 2 절 연구개발의 범위...18
- 1. 1단계 연구개발 내용 및 결과...18
- 2. 2단계 연구개발 목표...19
- 가. 가동 증기발생기 전열관 인출 기술 개발 및 공정 자격부여...19
- 나. 가동 증기발생기 전열관 플러그 제거 기술 개발 및 공정 자격부여...19
- 다. 증기발생기 전열관 In Situ 공정 원격자동화 및 적용(In Situ Test System Remotely Automation & Application)...19
- 3. 2단계 연구개발 내용...19
- 가. Tube Pulling System Modification...19
- 나. Plug Removal System Modification...19
- 다. In Situ Test System 자동화...20
- 라. 현장 정비기술 개발...20
- (1) Tube Pulling System...20
- (2) Plug Removal System...20
- (3) In-Situ Test System...20
- 제 2 장 국내외 기술개발 현황...21
- 제 1 절 국내 기술개발 현황...21
- 1. Tube Pulling 기술 현황...21
- 2. Plug Removal 기술 현황...21
- 3. In-Situ Pressure Test 기술 현황...22
- 제 2 절 국외 기술개발 현황...22
- 1. Tube Pulling 기술 현황...22
- 가. WEG Reactor (Germany)...22
- 나. Westinghouse (U.S)...24
- 2. Plug Removal 기술 현황...25
- 가. WEG Reactor (Germany)...25
- 나. Westinghouse (U.S)...27
- 3. In-Situ Pressure Test 기술현황...28
- 가. WEG Reactor (Germany)...28
- 4. Framatome 사의 증기발생기 Maintenance와 Repair 기술현황...29
- 제 3 절 국내외 기술개발 동향 분석...30
- 1. 국내외 연구개발 동향...30
- 가. 증기발생기 전열관 정비기술 개발 및 현장적용 시스템(Steam Generator Tube Repair Technology Development and Application)...30
- 나. 세부 기술사항의 검토 분석...30
- 제 3 장 연구개발 수행 내용 및 결과...33
- 제 1 절 Plug Removal System Modification 및 자격부여...33
- 1. Plug Shrinking System Modification...33
- 2. Plug Pulling System Modification...34
- 3. Plug 기계가공 System Modification...35
- 4. 현장 정비절차서 개발...36
- 5. Plug Removal System Qualification Report...36
- 가. Pri-Condition...36
- 나. Specimen Preparation...37
- (1) Model F...37
- (2) Model KS CE 80...37
- (3) Model Framatome 51 B...37
- 다. Test Result...38
- 제 2 절 Tube Pull System Modification 및 자격부여...39
- 1. Tubesheet Milling System Modification...39
- 2. Tube Shrinking System Modification...40
- 3. Top of Tubesheet ID Cutting system Modification...41
- 4. Tube Support Plate ID Cutting System Modification...42
- 5. Tube ID Pulling System Modification...43
- 6. Tube OD Pulling System Modification...44
- 7. 현장 정비절차서 개발...46
- 8. Tube Pull System Qualification Report...46
- 가. Specimen Preparation...46
- (1) Model F...46
- (2) Model KS CE 80...46
- (3) Model Framatome 51 B...47
- 나. Test Result...47
- 제 3 절 In Situ System 정비공정 Modification...48
- 1. In-Situ Pressure Test System Modification...48
- 2. 현장 정비절차서 개발...51
- 제 4 장 목표 달성도 및 관련분야에의 기여도...52
- 제 5 장 연구개발결과의 활용방안...53
- 1. Plug Removal System...53
- 2. Tube Pulling System...53
- 3. In Situ Pressure Test System...53
- A. Plug Removal System Qualification Report...55
- B. Tube Pull System Qualification Report...123
- C. 증기발생기 전열관 관마개 제거 Marking & Cleaning 절차서...189
- D. 증기발생기 전열관 관마개 제거 기계가공 절차서...214
- E. 증기발생기 관마개 제거를 위한 Shrinking 절차서...229
- G. 증기발생기 전열관 관마개 인출 절차서...249
- H. 증기발생기 전열관 관마개 인출 후 육안검사 절차서...268
- I. 증기발생기 전열관 인출 Marking, Cleaning 절차서...283
- J. 증기발생기 전열관 Tube sheet 기계가공 절차서...295
- K. 증기발생기 전열관 내경 절만 절차서...310
- L. 증기발생기 전열관 인출을 위한 Shrinking 절차서...326
- M. 증기발생기 전열관 내, 외경 인출 절차서...345
- N. 증기발생기 전열관 인출 후 육안검사 절차서...365
- O. 증기발생기 전열관 In-Situ Pressure Test 절차서...380
※ AI-Helper는 부적절한 답변을 할 수 있습니다.