보고서 정보
주관연구기관 |
대구보건대학 |
연구책임자 |
이기대
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2002-10 |
주관부처 |
과학기술부 |
사업 관리 기관 |
한국과학재단 Korea Science and Engineering Foundtion |
등록번호 |
TRKO200900072083 |
사업명 |
기초과학연구사업>특정기초연구 |
DB 구축일자 |
2013-04-18
|
키워드 |
귀금속.금합금.금-은-팔라듐합금.비귀금속.닉켈-크롬 합금.코발트-크롬합금.도재소부용 합금.치과용 합금.치과기공용 합금.Precious metal.zGold alloy.Au-Ag-Pd alloy.Non-precious metal.Ni-Cr alloy.Co-Cr alloy.Porcelain fused to meta.Noble metal.Base metal.
|
초록
▼
1. 조성적으로 디자인된 20Karat 이상인 도재소부용 고금합유금합금에서의 합금 조성은 Au(86%), Pt(5%), Pd(4%), Ag(2%), In(1%), Sn(1%), Ti(1%) 이다.
2. 조성적으로 대자인된 16Karat 이상인 도재소부용 저금함유금합금에서의 합금 조성은 Au(67%), Pd(13%), Ag(12%), Pt(3%), In(2%), Sn(2%), Ti(1%)이다.
3. 고금함유금합금은 제I형에 해당되며 저금함유금합금은 제IV형에 해당되며 규격에 의거 도재소부용 합금의 요구 성질을 얻을 수 있다
1. 조성적으로 디자인된 20Karat 이상인 도재소부용 고금합유금합금에서의 합금 조성은 Au(86%), Pt(5%), Pd(4%), Ag(2%), In(1%), Sn(1%), Ti(1%) 이다.
2. 조성적으로 대자인된 16Karat 이상인 도재소부용 저금함유금합금에서의 합금 조성은 Au(67%), Pd(13%), Ag(12%), Pt(3%), In(2%), Sn(2%), Ti(1%)이다.
3. 고금함유금합금은 제I형에 해당되며 저금함유금합금은 제IV형에 해당되며 규격에 의거 도재소부용 합금의 요구 성질을 얻을 수 있다.
4. 조성적으로 디자인된 도재소부용 비귀금속합금에서의 고농도 닉켈-크롬계 합금은 Ni 73.28%, Cr 20.7%, 채 0.89%, Al 2.35%, Mo 1.74%, Cu 0.78%, Si 0.21%이다. 저농도 닉켈-크롬계 합금은 Ni 58.29%, Cr 20.82%, Co13.88%, Al 2.83%, Mo 2.26%, Cu 0.67%, Si 1.25%이다.
5. 경도 및 강도는 주성분 이외의 첨가원소들에 의해서 영향을 받으며 귀금속합금에서는 인듐, 주석, 티타늄이, 비귀금속합금에서는 알루미늄, 몰리브덴, 동의 원ㅅ에 의서 기계적 성질이 변화한다.
6. 귀금속합금 및 비귀금속합금의 용해는 가스화염용해법 보다는 고주파유도용해법이 적절하고 주조는 원심력에 의한 횡형 원심주조법이 적절하다.
7. 도재소부용 합금재료를 이용한 보철물의 제작상의 각 과정의 기공 공정을 제정한다.
8. 본 연구에서의 귀금속 및 비귀금속합금은 임상에 적용될 수 있는 실용합금이다.
Abstract
▼
The high Au alloy containing high gold contents is respectively Au(86%), Pt(5%), Pd(4%), Ag(2%), In(1%), Sn(1%), Ti(1%), And the low Au aloy containing low gold contents is respectively Au(67%), Pd(13%), Ag(12%), Pt(3%), In(2%), Sn(2%), Ti(1%), Theses alloys are composed mainly of gold, platinium, s
The high Au alloy containing high gold contents is respectively Au(86%), Pt(5%), Pd(4%), Ag(2%), In(1%), Sn(1%), Ti(1%), And the low Au aloy containing low gold contents is respectively Au(67%), Pd(13%), Ag(12%), Pt(3%), In(2%), Sn(2%), Ti(1%), Theses alloys are composed mainly of gold, platinium, silver and palladium with a few percent of the additional elements. By the addition of small amounts of elements sch as In, Sn Ti, the fine grain castings ae prodiced in gold alloy. These alloys have mechanical properties characteristic of Type I and Type IV gold alloys.
The Ni-Cr-Co alloy containing high nickel contents is respectively Ni(71%), Cr(20%), Co(2.0%), Al(28%), Mo(2.2%), Cu(1%) and Si(1%), And the Ni-Cr-Co alloy containing low nickel contents is respectively Ni(55%), Cr(21%), Co(16%), Al(3.2%), Mo(2.8%), Cu(1%) and Si(1%). These alloys are composed mainly of gold, platinium, silver and palladium with a few percent of the additional elements.
By the addition od small amounts of elements such as Cu, Al, Ti, the fine grain castings ae produced in Ni-Cr alloy.
These alloys ae useful to porcelain-metal restorations and dental laboratory. Also dental laboratory tests are successful t porcelain-metal restorations using these alloys.
목차 Contents
- I. 연구계획 요약문...3
- 1. 국문요약문...3
- II. 연구결과 요약문...4
- 1. 국문요약문...4
- 2. 영문요약문...5
- III. 연구내용...6
- 1. 서론...6
- 2. 연구방법 및 이론...12
- 3. 결과 및 고찰...23
- 4. 결론...83
- 5. 참고문헌...84
※ AI-Helper는 부적절한 답변을 할 수 있습니다.