보고서 정보
주관연구기관 |
교통환경연구소 |
연구책임자 |
강대준
|
참여연구자 |
구진회
,
이재원
,
권혁제
,
박형규
,
김지윤
,
김종춘
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2007-12 |
주관부처 |
환경부 |
사업 관리 기관 |
국립환경과학원 National Institute of Environmental |
등록번호 |
TRKO201200011539 |
DB 구축일자 |
2013-04-18
|
초록
▼
○ 소음.진동규제법에 정하고 있는 소음배출시설의 분류기준 조사
- 동력기준, 대수기준 및 기타기준
- 외국의 소음배출시설 분류기준 조사
○ 동력별 분류에 따른 소음배출시설 특성 조사
- 압축기, 송풍기, 단조기, 금속절단기 등 25종의 동력별 소음배출 특성 조사
- 음향파워레벨 조사 및 주파수 특성 분석
○ 대수기준 시설 및 기타시설에 대한 소음배출 특성 조사
- 공업용 재봉기, 시멘트벽돌 및 블록의 제조기계 등 10종의 대수 기준 시설 및 기타시설의 소음배출 특성 조사
- 음향파워레벨 조
○ 소음.진동규제법에 정하고 있는 소음배출시설의 분류기준 조사
- 동력기준, 대수기준 및 기타기준
- 외국의 소음배출시설 분류기준 조사
○ 동력별 분류에 따른 소음배출시설 특성 조사
- 압축기, 송풍기, 단조기, 금속절단기 등 25종의 동력별 소음배출 특성 조사
- 음향파워레벨 조사 및 주파수 특성 분석
○ 대수기준 시설 및 기타시설에 대한 소음배출 특성 조사
- 공업용 재봉기, 시멘트벽돌 및 블록의 제조기계 등 10종의 대수 기준 시설 및 기타시설의 소음배출 특성 조사
- 음향파워레벨 조사 및 주파수 특성 분석
○ 소음배출시설의 분류기준 검토 및 신규소음배출시설의 소음특성 조사
- 레이저 절단기의 주파수 특성 분석 및 소음특성 조사
Abstract
▼
As the various industrial machinery has come into being by development of industrial technology, the productivity of the industrial machinery has improved and the international competitiveness of manufactoring industry of Korea has strengthened, However, at the same time, the noise from various indu
As the various industrial machinery has come into being by development of industrial technology, the productivity of the industrial machinery has improved and the international competitiveness of manufactoring industry of Korea has strengthened, However, at the same time, the noise from various industrial machinery disturbs the quiet environment.
There are lots of noise emission machinery defined in the noise and vibration control act. The first class of noise emssion machinery contains 25 kinds of the noise emission machinery according to the horse power, and the second class of noise emission machinery contains 7 kinds of the noise emission machinery according to the number of machinery and the third class of noise emission machinery contains 4 kinds of the rest noise emission machinery, These were classified in 1992 through investigation from 1990 to 1991, and the characteristic of the noise emission machinery may different from the past one. As the new noise emission machinery has come into being, we have to prepare for controlling it rightly.
In this survey, we measured sound intensity of en noise emission machinery to calculate the sound power levels of those and investigated the characteristic of the sound power level of those according to the frequency. From the survey, we found that the generator, forging machine, automatic revolving and blowing machine, concrete pipe and pile making machine, cement brick and block pressing machine and sawing machine are the noisy machinery, and the automatic packing machine, sewing machine, centrifugal separator, grinder, mixer and molding machine are the silent machinery. Also the generator, the concrete pipe and pile making machine, the printing machine, the briquet pressing machine, the cement brick and block pressing machine emit the low frequency noise, and the molding machine, the stone cutter, the metal cutter, the sawing machine and the automatic revolving blowing machine emit the high frequency noise.
목차 Contents
- 표지 ... 1
- 요약문 ... 2
- Contents ... 5
- 목 차 ... 8
- Table Caption ... 11
- Figure Caption ... 12
- ABSTRACT ... 15
- I. 서 론 ... 17
- II. 조사내용 및 방법 ... 18
- 1. 조사기간 ... 18
- 2. 조사대상 ... 18
- 3. 국내.외 소음배출시설 분류기준 ... 19
- 4. 조사방법 ... 21
- 가. 음향파워레벨이란 ... 21
- 나. 음향세기 측정 ... 22
- 다. 측정기기 및 측정방법 ... 23
- 라. 음향세기 스캐닝 ... 23
- 마. 음향파워레벨의 산출 ... 24
- III. 연구결과 및 고찰 ... 26
- 1. 소음배출시설의 소음 실태 ... 26
- 2. 각 소음배출시설의 음향파워레벨 특성 ... 30
- (1) 압축기(Compressor) ... 30
- (2) 송풍기(Blower) ... 31
- (3) 단조기(Forging Machine) ... 32
- (4) 금속절단기(Metal Cutter) ... 33
- (5) 프레스(Press) ... 34
- (6) 탈사기(Blaster) ... 35
- (7) 분쇄기(Crusher, 파쇄기.마쇄기 포함) ... 36
- (8) 원심분리기(Centrifugal Separator) ... 37
- (9) 혼합기(Mixer) ... 38
- (10) 공작기계(Machine Tool) ... 39
- (11) 제분기(Mill) ... 40
- (12) 제재기(Sawing Machine) ... 41
- (13) 목재가공기계(Woodworking Machine) ... 42
- (14) 인쇄기계(Printing Machine) ... 43
- (15) 암연기(Rolling Mill) ... 44
- (16) 성형기(Molding machine, 압출.사출 포함) ... 45
- (17) 주조기계(Casting Machine, 다이케스팅기 포함) ... 46
- (18) 콘크리트관 및 파일의 제조기계(Concrete Pipe and Pile Making Machine) ... 47
- (19) 펌프(Pump) ... 48
- (20) 금속가공용 인발기(Tube Drawing Machine) ... 49
- (21) 연탄제조용 윤전기(Briquet Pressing Machine) ... 50
- (22) 공업용 재봉기(Sewing Machine) ... 51
- (23) 시멘트벽돌 및 블록의 제조기계(Cement Brick and Block Pressing Machine) ... 52
- (24) 자동제병기(Automatic Revolving Blowing Machine) ... 53
- (25) 제관기계(Tube Making Machine) ... 54
- (26) 자동포장기(Automatic Packing Machine) ... 55
- (27) 직기(Loom) ... 56
- (28) 방적기계(Spinning Machine) ... 57
- (29) 발전기(Generator) ... 58
- (30) 연삭기(Grinder) ... 59
- (31) 석재절단기(Stone Cutter) ... 60
- 3. 비분류 소음배출시설(레이저 절단기) ... 61
- (1) 레이저 절단의 원리 ... 61
- (2) 레이저 절단의 특징 ... 62
- (3) 레이저 절단 방법 ... 63
- (4) 레이저 절단기의 음향파워레벨 ... 65
- IV. 결 론 ... 66
- 참 고 문 헌 ... 68
- 부록 ... 69
- □ 소음배출시설 해설 ... 69
- □ 주파수레벨 음향파워레벨(PWL) ... 105
- □ 조사대상 측정 환경 ... 120
- 연구사업 참여자 ... 136
※ AI-Helper는 부적절한 답변을 할 수 있습니다.