최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
DataON 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Edison 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Kafe 바로가기주관연구기관 | 한국원자력연구원 |
---|---|
연구책임자 | 이근우 |
참여연구자 | 김계남 , 김성균 , 서범경 , 서용칠 , 안도희 , 이동규 , 양희철 , 정관성 , 정운수 , 정종헌 , 조일제 , 지영용 , 최영수 , 최왕규 , 홍상범 , 강영애 , 박찬희 , 이보람 , 이진영 , 최혜민 , 황정훈 , 황호상 |
보고서유형 | 2단계보고서 |
발행국가 | 대한민국 |
언어 | 한국어 |
발행년월 | 2012-02 |
과제시작연도 | 2011 |
주관부처 | 교육과학기술부 |
사업 관리 기관 | 한국연구재단 |
등록번호 | TRKO201300018182 |
과제고유번호 | 1345151823 |
DB 구축일자 | 2013-08-26 |
키워드 | 해체,공정 평가,안전성 평가,극저온 절단,알파/베타선 측정,고분자 섬광체decommissioning,process assessment,safety assessment,cryogenic cutting,alpha/beta detection,fluorescent polymer |
III. 연구개발의 내용 및 범위
본과제의 연구개발 내용 및 범위는 다음과 같다.
1. 고방사능 시설 해체공정 모사 및 안전성 평가 기술 개발
가. 해체공정 평가 기술 개발
○ 고방사능 시설 해체 VR 시스템 개념 설정
- 해체 VR 시스템 기능 설계
- 해체 공정 시나리오 및 평가항목 선정
○ 고방사능 환경 가상현실 모델링
- 고방사능 환경 3차원 모델링
- 고방사능 VR 환경 구축
○ 고방사능 환경 해체공정 가상현실 구현
- 해체공정 별 작업 방법 및 상세 절차 수립
III. 연구개발의 내용 및 범위
본과제의 연구개발 내용 및 범위는 다음과 같다.
1. 고방사능 시설 해체공정 모사 및 안전성 평가 기술 개발
가. 해체공정 평가 기술 개발
○ 고방사능 시설 해체 VR 시스템 개념 설정
- 해체 VR 시스템 기능 설계
- 해체 공정 시나리오 및 평가항목 선정
○ 고방사능 환경 가상현실 모델링
- 고방사능 환경 3차원 모델링
- 고방사능 VR 환경 구축
○ 고방사능 환경 해체공정 가상현실 구현
- 해체공정 별 작업 방법 및 상세 절차 수립
- 해체 VR 시뮬레이션 구축
○ 방사능 오염도 3차원 가시화 프로그램 개발
- 대상물 위치 별 방사능 오염 데이터 DB 구축
- 방사능 오염도 가시화 프로그래밍
○ 가상 작업자 피폭 산정 모듈 개발
- 작업경로에 따른 피폭량 산정 프로그래밍
○ 고방사능 공정평가 모듈 개발
- 해체정보 가시화 프로그램 개발
○ 고방사능 VR 환경 및 공정평가 모듈 통합
- 해체 VR 시스템 통합/관리 GUI 개발
나. 해체공정 안전성 평가 기술 개발
○ 해체 안전성 평가 체계 설정
- 일반 안전성 평가 기술 사례 분석
- 해체공정 안전성 평가 체계 수립
○ 원자력시설 해체공정 위험성 분석
- 해체공정 재해 사례 및 위험성 분석
- 해체공정 작업 수행 고려사항 분석
○ 원자력시설 해체공정 위험 평가요소 선정
- 해체공정 위험 평가요소 사례 분석
- 해체공정 위험 평가요소 선정 방법 개발
- 해체공정 위험 평가요소 선정
○ 해체공정 안전성 평가 방법론 개발
- 해체공정 안전성 평가 퍼지추론 원리 개발
- 해체공정 안전성 평가 절차 개발
- 해체공정 안전성 정량적 평가 기법 개발
- 해체공정 안전성 평가 기법 타당성 검증
○ 해체공정 안전성 평가 시스템 개발
- 해체공정 안전성 평가 프로그램 개념 설계 및 메뉴 구성
- 해체공정 안전성 평가 시스템 환경 설정
- 해체공정 안전성 정량적 평가 모듈 개발
- 해체공정 안전성 평가 통합메뉴 GUI 개발
2. 고준위 알파/베타선 오염도 동시 측정기술 개발
○ 고방사능 오염도 측정장비 구성 및 개념설정
- 고준위 오염도 측정장비 및 검출소재 제조 기술현황 분석
- 고방사능 오염도 측정용 기본소재 특성 평가
- 고방사능 오염도 측정장비 구성 및 개념설정
○ 협소구역 오염도 측정용 결정형 센서 개발
- 결정형 센서 지지체 제조조건 확립
- 오염도 측정용 섬광층 제조조건 도출 및 성능 평가
- 원거리 신호전송용 일체형 센서 제조 및 특성 평가
○ 알파/베타선 동시 측정용 섬광검출소재 개발
- 고준위 베타선 측정용 검출소재 제조기술 개발
- 알파/베타선 동시 측정용 이중구조 섬광검출소재 개발
- 오염도 원격 측정 제어기술 개발
○ 대면적 오염도 측정 및 핵종 포집용 분사형 검출소재 개발
- 이중구조 분사형 검출소재 제조방안 도출
- 대면적 오염도 측정용 core polymer 제조조건 도출 및 특성 평가
- 오염 핵종 포집용 shell polymer 제조조건 도출 및 특성 평가
○ 고준위 알파/베타 오염도 원격측정장비 개발
- 알파/베타선 오염도 측정 원격 제어 방안 선정
- 협소구역 오염도 측정 센서 원격 제어 기술 개발
- 대면적 오염도 측정 센서 원격 제어 기술 개발
- 고준위 오염도 원격측정장비 개발
3. 고방사능 설비 다기능 복합 해체장비 개발
○ 다기능 해체장비 개념 설계
- 다기능 해체장비 기능설정 및 구성
- 해체장비 성능 요구사양 도출
○ 고방사능 적용 절단기술 분석
- 고방사능 시설 해체기술 기술현황 분석
- 극저온 절단기술 시뮬레이션
- 극저온 절단 시스템 설계
- 절단 실험용 가압공정장치 설계/제작
○ 액체질소 기화 방지를 위한 극저온 유지 기술 개발
- 감쇠기 및 액체질소 이송배관 CFD 열전달 해석
- 극저온 유지 공정 장치 제작 및 성능 시험
- 진공 유지 장치 제작
- 액체질소 공급 장치 제작
○ 고방사능 절단 성능평가 및 조건 선정
- 재질별 최적 절단 조건 선정
○ 해체장비 복합 제어 기술 개발
- 극저온 절단 노즐 위치 제어 기술 개발
- 다기능 해체장비 그래픽 제어 기술 개념설계
III. Scope and Contents of the Projects
1. Development of decommissioning process assessment system
○ Conceptual design of decommissioning VR system for highly activated facility
- Determination of decommissioning VR system functions
- Selection of decommissioning scenarios and evaluatio
III. Scope and Contents of the Projects
1. Development of decommissioning process assessment system
○ Conceptual design of decommissioning VR system for highly activated facility
- Determination of decommissioning VR system functions
- Selection of decommissioning scenarios and evaluation items.
○ VR Modeling of highly activated environment
- Selection of virtual highly activated facility
- 3D CAD modeling of highly activated facility
- Construction of VR environment
○ Development of VR Simulation
- Setup the dismantling method and detailed scenarios
- Construction of decommissioning VR system
○ Development of 3D radioactive visualization system
- Construction of radioactive database
- Programming of 3D radioactive visualization system
○ Development of worker' s exposure evaluation system
- Programming worker' s exposure evaluation system
○ Development of decommissioning process evaluation module
- Programming decommissioning process evaluation module
○ Integration of VR system and evaluation module
- Development of integration/maintenance decommissioning VR system GUI
○ Establishment of the systematic procedure for decommissioning safety assessment
- Establishment of procedure for decommissioning safety assessment
- Identification of factors for decommissioning process safety assessment
○ Development of methodology for decommissioning process safety assessment
- Development of estimation model for decommissioning process risk
- Development of method for radiological safety quantitative assessment
- Development of method for non-radiological safety quantitative assessment
○ Development of program for decommissioning process safety assessment
- Conceptual design of decommissioning process safety assessment
- Development of the module for decommissioning process risk estimation
- Development of the program for decommissioning process safety assessment
- Development of the integrated GUI for decommissioning process safety assessment
2. Development of the contamination monitoring technology of highly contaminated facilities
○ Conceptual design and organization of the high radioactive contamination monitoring system
- Analysis of the state-of-the-art for high alpha contamination monitoring units and detectors
- Estimation of the characterization for the detection materials
- Conceptual design and organization of the monitoring system
○ Development of the bulk type counting material for the narrow area monitoring
- Determination of the preparation condition for bulk type sensor
- Preparation and ability estimation of the scintillator layer for alpha particles detection
- Preparation and characterization of one-body type sensor for the remote signal
transmission
○ Development of the remote monitoring technology for the high radioactive contamination
- The long distance signal transmission technology development
- Integration of the detecting sensor and signal process system
- Manufacture of the remote monitoring system and application test
○ Development of the simultaneous measurement technology of the alpha/beta contamination
- Preparation technology of the detection material for the high-level beta contamination measurement
- Development of the control technology for the remote measurement
- Technology development of the simultaneous alpha/beta measurement
- Manufacture of the simultaneous alpha/beta measurement system and ability test
○ Development of the spray type counting material for the wide area contamination monitoring
- Determination of the preparation method for spray type counting material
- Preparation and characterization estimation of the core polymer for the radiation detection
- Preparation and characterization estimation of the shell polymer for the radioactive contaminant capture
○ Development of the remote control technology and measurement system for high radioactive contamination monitoring
- Development of the remote control technology for the high alpha/beta contaminant detecting sensor
- Development of the remote control technology for detecting contaminants in the narrow area
- Development of the remote control technology for detecting contaminants in the wide area
- Development of the high contaminants remote detecting system
3. Development of multipurpose dismantling equipment for highly contaminated facility
○ Conceptual design of multi-purpose decommissioning equipment
- Setup the functions and system layout of multi-purpose decommissioning equipment
- Setup the technical requirements of multi-purpose decommissioning equipment
○ Technical analysis of dismantling technology for decommissioning highly activated facility
- Technical analysis of dismantling technology
- Simulation of cryogenic cutting technology
- Design of cryogenic cutting system
- Design/manufacturing of high pressure system for cryogenic cutting
○ Development of cryogenic temperature maintenance technology
- CFD thermal analysis of attenuator and LN2 transfer pipe
- Manufacturing and test of cryogenic temperature maintenance system
- Manufacturing of vacuum generation system
- Manufacturing of LN2 supply system
○ Experiment of cryogenic cutting system and selection of operation condition
- Selection of cutting condition for each material type
○ Development of cryogenic cutting control system and muti-purpose control system
- Development of cryogenic nozzle positioning control system
- Conceptual design of graphic control system of multi-purpose dismantling equipment
과제명(ProjectTitle) : | - |
---|---|
연구책임자(Manager) : | - |
과제기간(DetailSeriesProject) : | - |
총연구비 (DetailSeriesProject) : | - |
키워드(keyword) : | - |
과제수행기간(LeadAgency) : | - |
연구목표(Goal) : | - |
연구내용(Abstract) : | - |
기대효과(Effect) : | - |
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.