보고서 정보
주관연구기관 |
현대건설(주) |
연구책임자 |
정준교
|
참여연구자 |
이근우
,
강완협
,
임장혁
,
김행수
,
김강석
,
지윤환
,
윤지나
,
김덕기
,
이병노
,
이승오
,
김수영
,
한인순
,
양지로
,
성호제
,
이준선
,
김경모
,
김명철
,
이존국
,
정민교
,
박세진
,
김원일
,
양홍모
,
이정식
,
허웅
,
서성식
,
이삼희
,
이두한
,
김명환
,
김영주
,
윤병모
,
이강오
,
나무영
,
박익수
,
정명규
,
박영배
,
김익남
,
이승오
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2014-06 |
과제시작연도 |
2010 |
주관부처 |
환경부 Ministry of Environment |
등록번호 |
TRKO201700003646 |
과제고유번호 |
1485008938 |
사업명 |
차세대핵심환경기술개발 |
DB 구축일자 |
2017-10-12
|
키워드 |
수생태 복원.생태하천.하상복원.하도육역화.유사관리.낮은바닥막이공법.웅덩이형 수제공법.하상안정화.하안안정화.Ecological restoration.Ecological river.river-bed restoration.land-forming.sediment management.restoration of river bed.low drop structure.pool type dikes.stabilization of river bed.stabilization of river bank.
|
DOI |
https://doi.org/10.23000/TRKO201700003646 |
초록
▼
■ 하도육역화 관리기술 개발
□ 연구개발 결과
- 하도육역화 집중조사 대상구간 선정 및 모니터링 : 4대권역 조사/분석
- 하도육역화 유형체계화 : 6단계로 구분
- 하도육역화 대상지역 유사량 산정 : 유사발생량 조사를 통한 원인분석
- 하도육역화 관리기술 : 홍수터 유사관리기술 + 유사연속성확보기술
- 하도육역화 관리기술 검증 : 실내실험 + 실규모 + 시험하천 현장검증 지형/수리수문/생태모니터링 효과검증 완료
- 하도육역화 지침서 : 일반/설계지침서 제공
■ 수생태계를 위한 자연
■ 하도육역화 관리기술 개발
□ 연구개발 결과
- 하도육역화 집중조사 대상구간 선정 및 모니터링 : 4대권역 조사/분석
- 하도육역화 유형체계화 : 6단계로 구분
- 하도육역화 대상지역 유사량 산정 : 유사발생량 조사를 통한 원인분석
- 하도육역화 관리기술 : 홍수터 유사관리기술 + 유사연속성확보기술
- 하도육역화 관리기술 검증 : 실내실험 + 실규모 + 시험하천 현장검증 지형/수리수문/생태모니터링 효과검증 완료
- 하도육역화 지침서 : 일반/설계지침서 제공
■ 수생태계를 위한 자연하상 복원 기술
□ 연구개발 결과
1. 시험구간 모니터링에 의한 기술 검증 및 평가
본 연구의 대표 공법인 낮은바닥막이 공법과 웅덩이형 수제공법을 안양천에 시험적용하여 공법의 수리적 안정성을 검증하고 생태적 효과를 평가하였다. 시험시공 후 3년간의 홍수기에 안정성을 유지하였다. 어류종의 개체수와 어류종수가 증가하였으며 미소서식처 형성으로 조류 및 어류의 서식처를 제공하는 것을 확인하였다.
2. 수리실험에 의한 기술 검증 및 평가
대표공법 2종에 대한 이동상 수리 실험 및 실규모 수리 실험을 수행하여 공법의 특성과 수리적 효과를 검증하였다. 낮은바닥막이 공법의 에너지 감세 효과와 하상파 이동 보장을 확인하였으며, 웅덩이형 수제 공법의 퇴적유도효과와 하도 중앙 소류력 집중 효과를 확인하였다.
3. 수치모의에 의한 기술검증 및 평가
대표공법 2종에 대한 3차원 수치모의를 수행하였다. 낮은바닥막이 공법의 낙차 형식에 따른 흐름특성과 에너지 감세 특성을 제시하였다. 웅덩이형 수제공법은 일반 수제와의 비교 모의를 통해서 웅덩이부 내부의 유속감세효과 및 퇴적유도효과를 확인하였다.
4. 기술 표준화 및 실용화 지원
대표공법 2종에 대한 기술표준화를 수행하여 표준 지침을 제시하였으며, 현장적용을 위한 경제성 분석을 수행하였다. 대표공법 및 보완공법에 대한 지재권확보를 수행하였으며, 낮은 바닥막이 공법에 대해서는 신기술 지정을 추진하였다. 문산천 등 설계반영이 이루어진 구간에 대해서 기술지원 등을 통해서 실용화를 지원하고 있다.
(출처 : 요 약 서 4, 20p)
Abstract
▼
■ Technology Development for Channel Landforming Management
Ⅳ. Results
1. Selection of landforming sites and monitoring
After the collection and analysis of information as the monitoring outputs from ecosystem, hydrology, and environmental influence on the aquatic ecosystem, the comparative
■ Technology Development for Channel Landforming Management
Ⅳ. Results
1. Selection of landforming sites and monitoring
After the collection and analysis of information as the monitoring outputs from ecosystem, hydrology, and environmental influence on the aquatic ecosystem, the comparative information for the application status of the developed technology was secured, and the information was then employed to select the monitoring items. The ecological monitoring has been carried out for vegetation, birds, amphibians/reptiles, fish, and benthic invertebrates. The monitoring objects exhibited sensitive responses for the developed technologies, so more extensive monitoring in three phases are planned. For hydrological monitoring, the flowing velocity, flowing volume, flowing particle diameters, and river topographic surveyings were performed, and three-dimensional precision survey was carried out to investigate the topographic changes. It will be comparatively evaluated followed by the construction method application. The water quality was turned out not to exhibit significant changes so to be utilized as a basic guidance for the ecosystem restoration in the future. It will be excluded for the further study due to its insignificant influence on the new technology.
2. Systematization of landforming types and development
landforming types and development was extracted from Analysis of several sites in 4 main river sites. We set the sixth stages; 1st fine sediments sedimentation stage, 2nd coarse sediment sedimentation stage and vegetation invasion in riparian, 3rd erosion decrease and sedimentation increase through the invaded vegetation and 4th ~ 5thstages fixation of sedimentation and vegetation settlement which makes problems in flood-risk. From these results, we set the valuation basis of landforming types and development.
3. Set the discharge sediment of selected sites
The watershed of Palmi-stream and Daejeon-stream was selected as main monitoring sites. There were several types of landforming in stream from 3 stage(mid-high) to 6 stage(highest). So, Basically we research the discharge sediment per year and calculated Palmi site’s total discharge sediment per year about 44,229 ton and Daejeon sites’s total discharge sediment per year about 28,012 ton.
4. Anti-landforming technology
The safety and efficiency of the Mulgol method has been ensured by the scale unit model test, so the relevant test results are assumed to be standard data for the size and applicability of the Mulgol method. Moreover, the on-site applicability and the management method for the channel landforming of the Mulgol method can be realized through the sediment control and energy reduction effect analysis of the Mulgol method that was developed by the hydraulic model test. Also, specific standardization for the size and effects of Mulgol method by using numerical properties of the scale unit model test is expected to be possible. The channel landforming preventive quaywall with the river channel drain method, Mulgol method, and the local scouring and the vegetation control type percolation pile method, which were developed by the investigation of relevant data and theoretical and experimental approaches, are applied for patents. The intellectual property rights for the technologies will be ensured as well as performing such efficient functions as vegetation control, the channel landforming prevention, and flowing velocity energy reduction. The developed technologies are expected to be verified and supplemented further through the continuous monitoring, hydraulic model test, and numerical simulation. After the suitability of the Mulgol method was analyzed by two-dimensional simulation, the sediment accumulation was turned out to be prevented naturally by the concentrated flow at the accelerated channel and the Mulgol method scale unit model. The results are expected to yield meaningful information for the standardization for three-dimensional numerical simulation later on. Moreover, 10% expansion of the scouring core and 30 % expansion of the scouring diameter were verified after the tree-dimensional numerical simulation about the scale unit model of the local scouring inducing type channel landforming preventive quawall. They will be used as basic standardization data for the on-site applicability in the third phase later on.
5. Verification of developed technology and evaluation of landforming reduction effect
The safety and efficiency of the Mulgol method has been ensured by the scale unit model test, so the relevant test results are assumed to be standard data for the size and applicability of the Mulgol method. Moreover, the on-site applicability and the management method for the channel landforming of the Mulgol method can be realized through the sediment control and energy reduction effect analysis of the Mulgol method that was developed by the hydraulic model test. Also, specific standardization for the size and effects of Mulgol method by using numerical properties of the scale unit model test is expected to be possible.
6. Development of landforming assessment systemI
It is consisted of server, input system and database for landforming assessment in selected sites. Several datas are secured from river corridor survey and main input datas are extracted from land/water area, land level change, grain size distribution and vegetations. These input data is processed by optimal ways to assess the sites. As the result, we can get the landforming types and development of selected sites automatically and continuously.
7. Guide-line for landforming management technology
Guide-line composed 3 section ; General guide-line, Application guide-line & Maintenance . Firstly, General guide-line is included by process development for landforming condition. This study made total process draft. Secondly, Application guide-line is included by technology utilization. We indicated developed techniques of plan, design, specification(ex, Mul-gol method). finally, This study proposed eco-friendly based Maintenance and analysis existing river-bed method.
■ Development of the restoration techniques for the aquatic ecosystem on fluvial river-beds
Ⅳ. Results
1. Monitoring
A low drop structure and a pool type dikes were installed in the test bed, Anyang stream, and monitoring for the test bed was conducted to verify hydraulic stability and ecological effect. During 3 year flood season, intalled techniques have shown hydraulically stable condition. Number of an individual and species of fish have been increased, and micro habitat for fish and bird have been formed in the test bed.
2. Verification and evaluation of techniques by hydraulic experiments
Laboratory hydraulic experiments and real scale experiments were conducted to analyze the characteristics and effects of the techniques. Through these experiments, effects of energy dissipation and movability of river bed wave are detected in the low drop structure, and effects of deposition promotion and tractive force concentration in the middle of main channel were also detected in the pool type dikes.
3. Verification and evaluation of techniques by numerical modeling
3D numerical simulations have been performed on two representative techniques. Through numerical modeling, flow characteristics and energy dissipation features are presented according to drop height of the low drop structures. Velocity reduction effect and deposition promotion effect in the pool type dikes are presented by comparative study with general dikes.
4. Promotion of representative techniques standardization and practical application
Standard application guides for two representative techniques are suggested through Standardization study and economical analysis are presented for field application. Intellectual property rights for representative techniques and complementary techniques are secured. new technique designation for the pool type dikes are in progress. Technical supports for field application such as Musan stream application, are on going.
(출처 : SUMMARY 15, 29p)
목차 Contents
- 표지 ... 1제출서 ... 2제출문 ... 3요약서 ... 4요약문 ... 7SUMMARY ... 14요약서 ... 20요약문 ... 23SUMMARY ... 28목차 ... 31제1장 서론 ... 35 제1절 연구개발과제의 개요 ... 35 1. 연구개발의 목적 및 필요성 [총괄] ... 35 1. 연구개발의 목적 및 필요성 [1세부] ... 43 2. 연구개발대상 기술의 차별성 [총괄] ... 46 2. 연구개발대상 기술의 차별성 [1세부] ... 50 제2절 연구개발의 국내외 현황 ... 56 1. 국내 관련 기술개발 현황 [총괄/1세부 공동수행] ... 56 2. 국외 관련 기술개발 현황 [총괄/세부 공동수행] ... 71 3. 국내외 특허 동향분석 [총괄/세부 공동수행] ... 91 제3절 연구개발의 내용 및 범위 [총괄] ... 109 1. 연구개발의 최종목표 [총괄] ... 110 1. 연구개발의 최종목표 [1세부] ... 111 2. 연도별 연구개발 목표 및 평가방법 [총괄] ... 113 2. 연도별 연구개발 목표 및 평가방법 [1세부] ... 114 3. 연도별 추진 체계 [총괄] ... 118 3. 연도별 추진체계 [1세부] ... 121제2장 연구개발 수행내용 및 결과 ... 125 제1절 연구개발 결과 및 토의 [총괄] ... 125 1. 하도육역화 집중 조사 대상구간 선정 및 모니터링 ... 125 2. 하도육역화 유형 체계화 ... 189 3. 하도육역화 대상지역 유사량 산정 ... 194 4. 하도육역화 관리 기술 ... 210 5. 하도육역화 관리 기술 검증(총괄위탁 작성) ... 222 6. 하도육역화 관리 시스템 개발 ... 486 7. 하도육역화 지침서(총괄위탁 작성) ... 497 제1절 연구개발 결과 및 토의 [세부] ... 506 1. 하상교란 및 복원 사례 조사 분석 ... 506 2. 국내 하상 특성 조사 분석 ... 562 3. 하상 안정화 및 하상 복원 기법 ... 639 4. 자연형 하상복원 기술 개발 ... 664 5. 자연형 하상복원 기술 검증 ... 687 6. 자연형 하상복원 기술 표준화 및 경제성 분석 ... 780 7. 하상복원 대상구간 선정 및 모니터링 ... 812 제2절 연구개발 결과 요약 [총괄] ... 869 1. 하도육역화 집중조사 대상구간 선정 및 모니터링 ... 869 2. 하도육역화 유형 체계화 ... 869 3. 하도육역화 대상지역 유사량 산정 ... 869 4. 하도육역화 관리기술 ... 869 5. 하도육역화 관리기술 검증 ... 870 6. 하도육역화 관리 시스템 개발 ... 870 7. 하도육역화 지침서 ... 871 제2절 연구개발 결과 요약 [세부] ... 872 1. 자연형 하상복원 기술 개발 및 검증 ... 872 2. 자연형 하상복원 기술 표준화 및 경제성 분석 ... 907제3장 목표달성도 및 관련분야 기여도 ... 918 제1절 연구개발목표의 달성도 [총괄] ... 918 1. 연구개발 목표 및 성격 ... 918 2. 평가착안점에 의한 목표 달성도 ... 919 제1절 연도별 연구개발목표의 달성도 [세부] ... 925 1. 연구개발 목표 ... 925 2. 평가착안점에 의한 목표 달성도 ... 925 제2절 관련분야의 기술발전 기여도 [총괄] ... 932 1. 연구개발 결과에 따른 기술적 기여도 ... 932 2. 연구개발 결과에 따른 생태환경적인 기여도 ... 933 3. 연구개발 결과에 따른 경제적 산업적인 기여도 ... 933 4. 연구개발 결과에 따른 기대 및 파급효과 ... 934 5. 연구개발 결과에 대한 활용방안 ... 934 제2절 관련분야의 기술발전 기여도(환경적 성과 포함) [1세부] ... 936 1. 연구개발 결과에 따른 기술적 기여도 ... 936 2. 연구개발 결과에 따른 생태환경적인 기여도 ... 936 3. 연구개발 결과에 따른 경제적 산업적인 기여도 ... 936 4. 연구개발 결과에 따른 기대 및 파급효과 ... 937 5. 후속 연구개발 계획에 대한 활용방안 ... 937제4장 연구개발결과의 활용계획 등 ... 938 제1절 연구개발 결과의 활용계획[총괄/세부] ... 938 1. 공법 및 기술개발관련 활용계획 ... 938 2. 지적재산권 관련 활용계획 ... 938 3. 시험구간 관련 활용계획 ... 938 4. 수리모형실험, 수치모의, 관련 모니터링 결과 활용계획 ... 938 5. 기술 이전 ... 938 6. 사업화 및 현장 적용 지원 ... 939 7. 주관기관/세부기관 연계 방안 ... 939 8. 국외 기술 확산 ... 939 제2절 연구개발과정에서 수집한 해외 과학기술정보 [총괄] ... 940 제2절 연구개발과정에서 수집한 해외 과학기술정보 [세부] ... 1101 제3절 연구개발결과의 보안등급 [총괄] ... 1102 제3절 연구개발결과의 보안등급 [세부] ... 1102 제4절 NTIS에 등록한 연구시설·장비현황 [총괄] ... 1103제5장 참고문헌 ... 1113 총괄 ... 1113 세부 ... 1118부록 ... 1122 용어정리 ... 1123 기술백서 ... 1127 하도육역화 관리 기술 일반 지침 ... 1150 하도육역화 관리 기술 설계 지침 ... 1330 하도육역화 기술 적용 매뉴얼 ... 1497끝페이지 ... 1563
※ AI-Helper는 부적절한 답변을 할 수 있습니다.