최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
DataON 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Edison 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Kafe 바로가기주관연구기관 | (주)케미콘 |
---|---|
연구책임자 | 조인성 |
참여연구자 | 최종화 , 기경국 , 정민구 , 반영주 , 이기연 , 박정훈 , 민태범 , 이재삼 , 정장원 , 주현섭 |
보고서유형 | 3단계보고서 |
발행국가 | 대한민국 |
언어 | 한국어 |
발행년월 | 2015-05 |
과제시작연도 | 2014 |
주관부처 | 국토교통부 Ministry of Land, Infrastructure, and Transport |
등록번호 | TRKO201700007441 |
과제고유번호 | 1615006986 |
사업명 | 국토교통기술촉진연구 |
DB 구축일자 | 2017-10-12 |
키워드 | 조강시멘트.혼화제.무(無)스팀 양생.콘크리트 2차제품.공기단축.Early Strength cement.Admixture.Non steam curing.Precast concrete product.Reduction of working period. |
DOI | https://doi.org/10.23000/TRKO201700007441 |
○ 본 연구는 스팀양생이 필요 없는 프리캐스트 콘크리트는 기건 양생으로 열에너지의 소모를 막고 스팀양생비용을 100%절감 시키는 것과 압축강도를 재령6시간 이내 주택공사 시방서에서 규정하는 탈형강도 10MPa를 발현하는 콘크리트를 개발함으로서 몰드 1개에 대하여 1日 2cycle 까지 생산을 가능하도록 하는 것이 본 연구의 목표이다. 본 연구 결과 국내 최초 C3S를 자극하는 수화반응 촉진제를 개발 하였으며 이에 따른 국내 고유 기술권 확보에 필요한 특허 2건을 출원 완료하여 기술개발을 완료하였다. 또한 수화반응 촉진제와 C3S의
○ 본 연구는 스팀양생이 필요 없는 프리캐스트 콘크리트는 기건 양생으로 열에너지의 소모를 막고 스팀양생비용을 100%절감 시키는 것과 압축강도를 재령6시간 이내 주택공사 시방서에서 규정하는 탈형강도 10MPa를 발현하는 콘크리트를 개발함으로서 몰드 1개에 대하여 1日 2cycle 까지 생산을 가능하도록 하는 것이 본 연구의 목표이다. 본 연구 결과 국내 최초 C3S를 자극하는 수화반응 촉진제를 개발 하였으며 이에 따른 국내 고유 기술권 확보에 필요한 특허 2건을 출원 완료하여 기술개발을 완료하였다. 또한 수화반응 촉진제와 C3S의 함량이 높은 3종 시멘트를 이용하여 거푸집 탈형 강도인 재령 6시간에 압축강도 10MPa을 개발하는 콘크리트 개발과 프리스트레싱이 적용되는 제품에 대해서는 재령 6시간에 압축강도 20MPa을 만족하는 콘크리트를 개발함으로서 스팀양생이 없는 프리캐스트 콘크리트 부재 개발에 되는 콘크리트의 배합설계를 제시 하였다. 그리고 제시된 콘크리트 배합을 이용하여 수화반응 촉진제와 조강시멘트를 사용하여 스팀양생이 없이도 거푸집 탈형 강도 10MPa를 만족하는 콘크리트 배합기술을 도입하여 현장 Mock-up test를 실시한 결과 스팀양생 없이 프리캐스트 제조가 가능 한 것을 알 수 있었으며 1day 2cycle 몰드 회전율이 증가하여 생산량을 증가 시킬 수 있었다. 또한 경제성 평가와 CO2 배출량 평가를 실시하였다. 경제성 평가에서는 기존 공법으로 생산된 프리캐스트 콘크리트(664,000원)보다 본 연구에서 개발된 스팀양생이 없는 프리캐스트 콘크리트 (644,000원)가 경제성이 높은 것으로 판단되었으며 CO2 배출량 평가에서는 평가 결과 기존 프리캐스트 콘크리트 제조 공정 대비 본 연구에서 개발한 프리캐스트 콘크리트는 CO2 배출량 23%절감 되는 것으로 나타났다. 최종 적으로 본 연구에서 제시하고자하는 기술을 평가 하였을 때 스팀양생 공정이 생략되더라도 프리캐스트 콘크리트를 생산할 수 있는 시스템을 구축하였다고 할 수 있다.
(출처 : 보고서 요약서 4p)
Ⅳ. Results of research development
The domestic concrete production method required to get steam curing like precast and spun concrete has steam curing with 60~80℃ temperature using dissel, lamp oil, bunker oil, in case of HPC pile requiring high pressure steam curing, precast concrete with compr
Ⅳ. Results of research development
The domestic concrete production method required to get steam curing like precast and spun concrete has steam curing with 60~80℃ temperature using dissel, lamp oil, bunker oil, in case of HPC pile requiring high pressure steam curing, precast concrete with compressive strength 10 MPa within 6 hours was developed using developed hydration reaction accelerators. As results of precast concrete without steam curing using developed concrete, although steam curing is skipped, precast concrete can be constructed.
1. Development of C3S accelerating hydration reaction
Hydration reaction accelerators stimulating C3S were developed first time domestically, technique developments were completed applying 2 patents necessary for getting domestic own technology right. Furthermore, developing massive prototype of hydration reaction accelerator, much efforts on transfer of technique are concentrated. Furthermore, the performed first time domestically CO2<.sub> evaluation about production unit item of precast concrete can be established as a basic research of CO2<.sub> evaluation.
2. Development for mixing design of precast concrete without steam curing
The early high strength performance of concrete is important for production of precast concrete without steam curing. Therefore, using hydration reaction accelerators and high early strength cement containing much C3S, mixing designs of concrete for precast concrete without steam curing were suggested with development for concrete required with compressive strength 10 MPa at 6 hours, and concrete required prestressing with 20 MPa at 6 hours. The 1 domestic patent about this technique was applied.
3. Development of precast concrete element without steam curing using hydration reaction accelerators
As results of Mock-up test, using hydration reaction acceleraotrs and high early strength cement, adopting mixing technique of concrete meeting with 10 MPa which is required strength for removal form, manufacture of precast concrete without steam curing is possible, production amount were also increased with increased rotational rate of mold to 1 day 2 cycle, the 5 patents concerned with it were applied.
(출처 : Summary 21p)
과제명(ProjectTitle) : | - |
---|---|
연구책임자(Manager) : | - |
과제기간(DetailSeriesProject) : | - |
총연구비 (DetailSeriesProject) : | - |
키워드(keyword) : | - |
과제수행기간(LeadAgency) : | - |
연구목표(Goal) : | - |
연구내용(Abstract) : | - |
기대효과(Effect) : | - |
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.