최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
DataON 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Edison 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Kafe 바로가기주관연구기관 | 한국표준과학연구원 Korea Research Institute of Standards and Science |
---|---|
연구책임자 | 박정학 |
참여연구자 | 김원태 |
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 | 한국어 |
발행년월 | 2016-07 |
과제시작연도 | 2015 |
주관부처 | 미래창조과학부 Ministry of Science, ICT and Future Planning |
등록번호 | TRKO201700009793 |
과제고유번호 | 1711028188 |
사업명 | 방사선기술개발사업 |
DB 구축일자 | 2017-11-04 |
키워드 | 비파괴검사.열탄성 에너지.응력장 분포.이종접합(용접).잔류응력측정.non-destructive inspection.thermal elastic energy.stress field distribution.dissimilar welding.residual stress measurement. |
-비접촉으로 넓은 영역에 존재하는 이종용접부 및 열영향부 응력분포 측정 가능
-초음파 적외선 열화상을 이용한 두께 1.5 mm의 용접 시험편에 존재하는 10㎛ 이하의 비드밑 미세결함 검출 가능
-공간분해능을 이용한 결함의 정량화 가능
-피로시험 및 반복 하중을 받는 구조물의 결함 유무를 파악할 수 있는 검출 기술을 확보하게 됨
-시험편과 결함 특성에 따라 초음파 고유 주파수를 가변하여 결함검출 최적화
-인장, 피로, 결함 시험편 제작에 관한 절차안 작성
-열탄성 측정 시험 장치 및 프로그램 제작
-비접촉으로 넓은 영역에 존재하는 이종용접부 및 열영향부 응력분포 측정 가능
-초음파 적외선 열화상을 이용한 두께 1.5 mm의 용접 시험편에 존재하는 10㎛ 이하의 비드밑 미세결함 검출 가능
-공간분해능을 이용한 결함의 정량화 가능
-피로시험 및 반복 하중을 받는 구조물의 결함 유무를 파악할 수 있는 검출 기술을 확보하게 됨
-시험편과 결함 특성에 따라 초음파 고유 주파수를 가변하여 결함검출 최적화
-인장, 피로, 결함 시험편 제작에 관한 절차안 작성
-열탄성 측정 시험 장치 및 프로그램 제작
-열탄성 측정 시험 방법 절차악 작성
(출처: 보고서 요약서 5p)
• Comparison analysis on the presence of the defect by measuring residual stress using radiation by making a reference specimen to inspect dissimilar welding parts
• Comparison of stress measurement methods for dissimilar metal weld: XRD, instrumented indentation and hole drilling.
• Making re
• Comparison analysis on the presence of the defect by measuring residual stress using radiation by making a reference specimen to inspect dissimilar welding parts
• Comparison of stress measurement methods for dissimilar metal weld: XRD, instrumented indentation and hole drilling.
• Making reference specimens with defects in dissimilar welding, and conducting XRD to detect the defects
• Development of simulation method to show the relation of residual stresses and thermal curing using non-destructive thermal-elastic effect
• Development of a technology to quantify characteristics of real defects by measuring thermal behavior in the defects during variable vibration excitation
• Correlation Analysis for the stress measurement methods by measuring thermal distribution, using infrared thermal imaging equipment, during mechanical excitation
• Development of technology to measure residual stress distribution around defects using the relation of the residual stress and elastic energy
• Development of a device to detect defects and to measure residual stress distribution by measuring the thermal-elastic energy in cyclic loading conditions
(출처: Summary 8p)
과제명(ProjectTitle) : | - |
---|---|
연구책임자(Manager) : | - |
과제기간(DetailSeriesProject) : | - |
총연구비 (DetailSeriesProject) : | - |
키워드(keyword) : | - |
과제수행기간(LeadAgency) : | - |
연구목표(Goal) : | - |
연구내용(Abstract) : | - |
기대효과(Effect) : | - |
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.