최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
DataON 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Edison 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Kafe 바로가기주관연구기관 | 서울대학교 Seoul National University |
---|---|
연구책임자 | 이전제 |
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 | 한국어 |
발행년월 | 2016-07 |
과제시작연도 | 2015 |
주관부처 | 산림청 Korea Forest Service |
등록번호 | TRKO201800000060 |
과제고유번호 | 1405002610 |
사업명 | 임업기술연구개발 |
DB 구축일자 | 2018-02-17 |
키워드 | 국산재.교호집성재.구조성능.에너지 성능.목조 건축.Domestic Species.Cross-Laminated Timber (CLT).Structural Performance.Heat energy Performance.Timber building. |
DOI | https://doi.org/10.23000/TRKO201800000060 |
- CLT 제조기술 개발 및 생산성 향상
CLT 제조에 필요한 접착 조건구명
CLT 제조용 라미나의 제재 수율예측 프로그램 개발
라미나의 건조스케쥴 개발
- 국산재로 제조된 CLT의 구조성능평가
E11이상 외곽층, E8이상 3매 접착한 CLT에 대한 설계값 산출 제시
소형 패널로 구성된 전단벽의 해석 모델개발
소형 패널로 구성된 전단벽에 대하여 길이 높이에 따른 허용 내력 산출 및 제시
- 목업 축조
개발된 CLT제조기술을 적용하여, 목업축조용 CLT 생산 결정된 설계값에 기초하여 목
- CLT 제조기술 개발 및 생산성 향상
CLT 제조에 필요한 접착 조건구명
CLT 제조용 라미나의 제재 수율예측 프로그램 개발
라미나의 건조스케쥴 개발
- 국산재로 제조된 CLT의 구조성능평가
E11이상 외곽층, E8이상 3매 접착한 CLT에 대한 설계값 산출 제시
소형 패널로 구성된 전단벽의 해석 모델개발
소형 패널로 구성된 전단벽에 대하여 길이 높이에 따른 허용 내력 산출 및 제시
- 목업 축조
개발된 CLT제조기술을 적용하여, 목업축조용 CLT 생산 결정된 설계값에 기초하여 목업 건축물의 구조설계 제작, 설계, 시공을 통해 연구결과 검증
- 에너지 성능 평가
축조된 목업 건축물에 대하여 소요난방에너지 측정
소요난방에너지 예측 프로그램을 작성, 검증
축조된 목업의 경우, 건축물 에너지 등급 중 최상위 등급인 1+++등급 확인되었음
CLT 건축물은 기밀막을 설치하지 않고도 비교적 높은 기밀성능을 보이는 것 확인
- 열처리재 적층 CLT 개발
라미나간 틈(Gap) 최소화를 위한 열처리재 적층 CLT의 제조방법 구명
CLT의 용도 확대 (가구재 또는 내장재 등 높은 미관이 요구되는 제품)
- 경제성 분석
주거용 건축물 1동에 대하여 경제성 분석 실시
대형 CLT패널 제조를 위한 제조시설의 확충과 국산 건조목의 가격경쟁력 확보가 시급한 것으로 확인
(출처: 보고서 요약서 5p)
- The CLT manufacturing process was calibrated for the two types of adhesives
- A software for predicting sawing yield and drying schedule for lamination of CLT were developed, then the productivity was improved.
- The structural performance was evaluated on CLT panel made of domestic tree spe
- The CLT manufacturing process was calibrated for the two types of adhesives
- A software for predicting sawing yield and drying schedule for lamination of CLT were developed, then the productivity was improved.
- The structural performance was evaluated on CLT panel made of domestic tree species, specified design properties were determined for the CLT grade which consists of E11 or higher grade at outermost layer and E8 or higher grade at center.
- The in-plane shear performance of CLT shear wall containing panel-to-panel connection were evaluated, which was made of small panel (1.2x2.4m). A kinematic model was formulated and validated for this type of shear wall. Allowable capacity of the shear wall was tabulated according to the wall length and height.
- CLT panels for constructing a mock-up building were manufactured by the developed CLT manufacturing methodology. The structural design and construction were performed based on the determined design properties. Through this process, the developed technology was verified.
- Heat energy was measured at the mock-up building. A program for predicting heat energy demand was written and validated. An annual heat demand was calculated by the program then the mock-up building was ranked on 1+++ which is the highest energy grade.
- The experiment of air-tightness on mock-up building showed that the CLT building has considerably high air-tightness even though air-tightness membrane was not installed. Also, installing air-tightness membrane is more robust than light-frame and post&beam construction because of less un-continuity of air-tightness membrane.
- To minimize a gap between laminations by moisture change, a superheated-steam-treated wood(SSTW) laminated CLT was developed. By laminating SSTW, the gap was minimized. This SSTW laminated CLT is expected to be used as interior/funiture material which requires aesthetics.
- A residential building was constructed with small CLT panels. Based on the cost of this building, economical analysis has been done. As a result, manufacturing facility to make large panel needs to be established and the competitiveness of dried domestic lumber needs to be improved.
(출처: Summary 9p)
과제명(ProjectTitle) : | - |
---|---|
연구책임자(Manager) : | - |
과제기간(DetailSeriesProject) : | - |
총연구비 (DetailSeriesProject) : | - |
키워드(keyword) : | - |
과제수행기간(LeadAgency) : | - |
연구목표(Goal) : | - |
연구내용(Abstract) : | - |
기대효과(Effect) : | - |
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.