최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
DataON 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Edison 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Kafe 바로가기주관연구기관 | 한국원자력연구원 Korea Atomic Energy Research Institute |
---|---|
연구책임자 | 홍성완 |
참여연구자 | 구길모 , 강형석 , 김상백 , 김종태 , 김희동 , 김환열 , 나영수 , 민병태 , 박종화 , 홍성호 , 송진호 , 송용만 , 손동건 , 정재훈 , 구인수 , 강경호 , 박익규 , 박찬국 , 오장수 , 박순달 , 김군홍 |
보고서유형 | 1단계보고서 |
발행국가 | 대한민국 |
언어 | 한국어 |
발행년월 | 2015-05 |
과제시작연도 | 2014 |
주관부처 | 미래창조과학부 Ministry of Science, ICT and Future Planning |
등록번호 | TRKO201800009455 |
과제고유번호 | 1711019322 |
사업명 | 원자력기술개발사업 |
DB 구축일자 | 2018-05-26 |
키워드 | 수소제어.격납건물 건전성.다차원 수소해석.증기폭발.필수계측기 생존성.Hydrogen Control.Containment Integrity.Multi-dimensional hydrogen analysis.Steam Explosion.Sensor Integrity. |
DOI | https://doi.org/10.23000/TRKO201800009455 |
o. 격납건물 건전성 확보 요소 기술 검증 실험을 위한 실험동(LIFE)을 구축하고, 격납건물 모의 용기 설계 및 제작/설치함. 또한, 계측장비 설치와 연구자의 작업 보조구조물 설치, 압력용 기외벽 이중벽 구성 및 높이별 5개 구역 온도제어시스템 구축, 측정 센서(온도, 압력 등)와 데이터 획득 시스템(DAS) 등 주변장치를 구축함.
o. 다차원 수소분포해석/연소해석 코드 이용한 역학적 수소해석 체계를 구축하고, 격납건물 3차원 형상모델링 및 격자생성을 통한 APR1400 사고 예비분석을 수행하였으며, 격납건물/격실내 다중스케
o. 격납건물 건전성 확보 요소 기술 검증 실험을 위한 실험동(LIFE)을 구축하고, 격납건물 모의 용기 설계 및 제작/설치함. 또한, 계측장비 설치와 연구자의 작업 보조구조물 설치, 압력용 기외벽 이중벽 구성 및 높이별 5개 구역 온도제어시스템 구축, 측정 센서(온도, 압력 등)와 데이터 획득 시스템(DAS) 등 주변장치를 구축함.
o. 다차원 수소분포해석/연소해석 코드 이용한 역학적 수소해석 체계를 구축하고, 격납건물 3차원 형상모델링 및 격자생성을 통한 APR1400 사고 예비분석을 수행하였으며, 격납건물/격실내 다중스케일 PAR 해석 체계를 구축함.
o. 침수 증기폭발실험 장치를 구축하고, ZrO2와 Corium 이용한 실험자료를 생산하였으며, TROI 장치를 이용하여 생산된 증기폭발 실험에 대해 종합 DB를 구축함.
o. SBO 사고 시 필수계측기생존 대처방안 개념개발을 위해 격납건물 철근 구조 및 콘크리트 전자장 전파특성 조사하고, 자기공진 무선전력 전송 시스템의 등가회로 모델링을 수행함.
(출처 : 보고서 요약서 3p)
Ⅳ. Results
Ⅳ. Results
o. Manufacturing and Installation of the Vessel for validation of containment phenomena
- Construction of Building : Total floor area 706m2, The first floor area : 143m2, Height:18 m
- Pressure Vessel : Inner Diameter 3.4 m, Height 10 m, Volume 80 m3
o. Manufacturing and Installation of the Vessel for validation of containment phenomena
- Construction of Building : Total floor area 706m2, The first floor area : 143m2, Height:18 m
- Pressure Vessel : Inner Diameter 3.4 m, Height 10 m, Volume 80 m3, Design pressure 15 bar at 180 ℃.
- Equivalent to international scale and 1/1000 scale of the containment volume of APR1400.
- Installation of the support structure for instrumentation and researcher's work : 4th floor and total area : 280m2
- Construction of the gas temperature control system in a vessel : The pressure vessel is divided five sections to control of the gas temperature. The five electric heaters are installed to the five sections. The each capacity of the power is 50 kW. The maximum design gas temperature in a vessel gas is 150 ℃.
- On constructing measurement sensors (Temperature and Pressure) and DAS : In preparation of sensors for gas temperature, pressure and wall temperature of the vessel and of DAS (360 channel)
o. Construction of multi-dimensional system for hydrogen distribution/combustion and its application to the plant
- Introduction and Installation using GASFLOW for hydrogen distribution and COM3D for hydrogen explosion.
- Validation of codes using various experimental data(THIA and ENACEF) obtained by joining international collaboration research.
- Preliminary application of the multi-dimensional system for hydrogen distribution/combustion to APR1400
- PAR analysis system to observe hydrogen behavior in micro and macro scale in a containment
o. FCI experimental data production under reactor submerged conditions.
- Reconstruction of TROI to simulate FCI under reactor submerged conditions by lifting the test section, installing protective valve, providing the intermediate catcher.
- 10 times FCI data production using ZrO2 and Corium
- DB construction of the 70 times more FCI data produced using TROI facility. It makes easily to access the experimental data see major experimental parameter effect.
o. The development of concept to survive the sensors during SBO accident sequence.
- Collection of the containment structure and code simulation of wireless transport efficiency through containment wall of electric power. It turned out that the efficiency is very low.
- Development of the equivalent modelling concept of wireless electric power supply system
(출처 : SUMMARY 11p)
목차 Contents
과제명(ProjectTitle) : | - |
---|---|
연구책임자(Manager) : | - |
과제기간(DetailSeriesProject) : | - |
총연구비 (DetailSeriesProject) : | - |
키워드(keyword) : | - |
과제수행기간(LeadAgency) : | - |
연구목표(Goal) : | - |
연구내용(Abstract) : | - |
기대효과(Effect) : | - |
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.