보고서 정보
주관연구기관 |
단국대학교 DanKook University |
연구책임자 |
독고석
|
참여연구자 |
Yuntao Guan
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2022-10 |
주관부처 |
과학기술정보통신부 Ministry of Science and ICT |
등록번호 |
TRKO202300013723 |
DB 구축일자 |
2023-10-31
|
초록
▼
□ 연구목적
본 연구의 주요 목적은 토양수역 전반에 중금속 제거 기술에 대한 효과를 확인하고 그에 대한 새로운 흡착물질을 개발함으로서 한국과 중국에서 최근 문제가 되는 수질 및 토양오염을 해결하는데 사용코자 함
□ 연구내용
본 연구에서는 철산화물 흡착제를 통하여 인산염 흡착 능력을 평가하고 그 결과를 통해 비소의 흡착 모델을 확정. 본 실험에서 사용한 흡착제는 FMBO, FMBO-Starch, FMBO-Graphen Oxide 등 세 가지이고 각 흡착제 30 mg을 인산염 solution 30 ml에 넣어 2
□ 연구목적
본 연구의 주요 목적은 토양수역 전반에 중금속 제거 기술에 대한 효과를 확인하고 그에 대한 새로운 흡착물질을 개발함으로서 한국과 중국에서 최근 문제가 되는 수질 및 토양오염을 해결하는데 사용코자 함
□ 연구내용
본 연구에서는 철산화물 흡착제를 통하여 인산염 흡착 능력을 평가하고 그 결과를 통해 비소의 흡착 모델을 확정. 본 실험에서 사용한 흡착제는 FMBO, FMBO-Starch, FMBO-Graphen Oxide 등 세 가지이고 각 흡착제 30 mg을 인산염 solution 30 ml에 넣어 24시간 동안 흡착 반응을 진행함으로서 상대적 흡착능을 비교하고 최고의 흡착능을 지닌 물질을 선정함. 초기 인산염 농도는 5.3 ppm, 12.3 ppm, 15.3 ppm 세 가지 농도로 진행함. 이것에 대한 평가를 위해 SEM, FTIR, XRD 등을 통해 비교분석수행
□ 연구결과
인산염 흡착 실험 결과 FMBO-S가 FMBO, FMBO-GO와 비교했을 때 인산염 흡착 성능이 가장 우수함. 초기 인산염 농도가 5.3 ppm일 때는 FMBO-S(0.4g), FMBO-S(0.8g), FMBO-S(0.6g), FMBO-S(0.2g) FMBO 순서로 흡착 성능이 우수하였고, 12.3 ppm일 때는 FMBO-S(0.4g), FMBO-S(0.8g), FMBO-S(0.6g), FMBO-S(0.2g), FMBO 순서로 흡착성능이 우수하였고, 16.3 ppm일 때는 FMBO-S(0.6g), FMBO-S(0.2g), FMBO-S(0.8g), FMBO-S(0.4g), FMBO 순서로 흡착 성능이 우수함.
SEM을 이용하여 FMBO 입자의 크기를 분석한 결과는 약 200~300nm이며, Starch 를 사용하는 FMBO-S 및 FMBO-2S 입자는 FMBO보다 상대적으로 표면적이 넓었음. FMBO-GO는 FMBO와 비교했을 때, 인산염 흡착 성능은 낮았지만 탄소와 유사한 구조를 가지고 있어 상대적으로 표면적이 넓었음.
□ 연구결과의 활용계획
본 실험에서는 초기 인산염 농도를 5.3 ppm, 12.3 ppm, 16.3 ppm 세 가지 농도를 가지고 실험을 진행하였으며 향후 높은 농도의 인산염 농도로 실험을 한다면 보다 광범위한 데이터를 얻을 수 있을 것으로 사료됨. 또한, 본 실험에서는 흡착 반응 시간을 24시간으로 진행하였는데, 흡착 반응 시간과 pH를 변수로 설정하여 탈착 실험하는 것도 필요함. 본 실험결과로는 현재까지 SCI 논문에 나온 인과 비소의 최대 흡착율에 대하여 진행하였으며 추가로 FMBO-S와 FMBO-GO를 합친 FMBO-SGO의 제조에 활용코자 함.
(출처 : 연구결과 요약문 3p)
Abstract
▼
□ Purpose
The main purpose of this study is to identify the effectiveness of the technology applicable to the entire soil area and to provide insight into it. At the same time, the need for stabilizing materials for aggregation between iron and manganese is identified and adsorption performance i
□ Purpose
The main purpose of this study is to identify the effectiveness of the technology applicable to the entire soil area and to provide insight into it. At the same time, the need for stabilizing materials for aggregation between iron and manganese is identified and adsorption performance is evaluated.
□ Contents
In this study, the phosphate adsorption ability of the adsorbent is evaluated and the adsorption ability of arsenic is predicted through the results. The three adsorbents used in the experiment were FMBO, FMBO-S, and FMBO-GO, and 30 mg of each adsorbent was added to 30 ml of phosphate solution and the adsorption reaction was carried out for 24 hours. The initial phosphate concentration was 5.3 ppm, 12.3 ppm, and 15.3 ppm.
□ Results
As a result of phosphate adsorption experiments, FMBO-S had excellent phosphate adsorption performance compared to FMBO and FMBO-GO. The adsorption performance was good in the order of FMBO-S (0.4g), FMBO-S (0.8g), FMBO-S (0.6g), FMBO (0.2g), FMBO at 5.3ppm, FMBO-S (0.4g), FMBO-S (0.8g), FMBO-S (0.6g), FMBO (0.2g), FMBO at 12.3ppm, FMBO-S (0.6g), FMBO-S (0.2g), FMBO-S (0.8g), FMBO (0.4g), FMBO at 16.3ppm.
□ Expected Contribution
In this experiment, the initial phosphate concentration was conducted with three concentrations: 5.3 ppm, 12.3 ppm, and 16.3 ppm. It is expected that more accurate experimental data can be obtained if experiments are conducted with a higher concentration of initial phosphate. In addition, in this experiment, the adsorption reaction time was 24 hours, and it is necessary to set the adsorption reaction time and pH as variables to conduct the experiment. In this experiment, the experiment was conducted with three samples: FMBO, FMBO-S, and FMBO-GO. In addition, the experiment should be conducted with FMBO-SGO combined with FMBO-S and FMBO-GO to check if there is a higher attraction ability.
(source : SUMMARY 4p)
목차 Contents
- 표지 ... 1
- 목차 ... 2
- 연구결과 요약문 ... 3
- 국문 요약문 ... 3
- SUMMARY ... 4
- 연구내용 및 결과 ... 5
- 1. 과제 개요 ... 5
- 2. 수행내용 및 결과 ... 5
- 3. 자체평가 ... 10
- 4. 연구결과의 활용 계획 ... 10
- 5. 연구과정에서 수집한 해외 정보 ... 11
- 6. 참고문헌 ... 11
- 7. 연구성과 ... 11
- 8. 기타사항 ... 13
- [붙임] 대 표 성 과 ... 14
- 끝페이지 ... 14
※ AI-Helper는 부적절한 답변을 할 수 있습니다.