최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기비파괴검사학회지 = Journal of the Korean Society for Nondestructive Testing, v.30 no.2 = no.118, 2010년, pp.146 - 154
김정석 (한양대학교 자동차공학과) , 박익근 (서울산업대학교 기계공학과) , 장경영 (한양대학교 기계공학부)
The effects of severe plastic deformation, equal channel angular pressing, and annealing of Al 5052 alloy on elastic modulus have been studied. The AI 5052 alloy was plastically deformed by ECAP method after solution treatment, and then finally annealing heat treated. Elastic modulus was measured by...
J. K. Luo, A. J. Flewitt, S. M. Spearing, N. A. Fleck and W. I. Milne, "Young's modulus of electroplated Ni thin film for MEMS applications," Materials Letters, Vol. 58, pp. 2306-2309 (2004)
S. U. Jen and T. C. Wu, "Young's modulus and hardness of Pd thin films," Thin Solid Films, Vol. 492, pp. 166-172 (2005)
Z. S. Li, Q. F. Fang, S. Veprek and S. Z. Li, "Evaluation of the internal friction and elastic modulus of the superhard films," Materials Science and Engineering: A, Vol. 370, pp. 186-190 (2004)
S. H. Kim, "Determination of mechanical properties of electroplated Ni thin film using the resonance method," Materials Letters, Vol. 61, pp. 3589-3592 (2007)
C. L. Dai and Y. M. Chang, "A resonant method for determining mechanical properties of Si3N4 and SiO2 thin films," Materials Letters, Vol. 61, pp. 3089-3092 (2007)
Z. S. Li, Q. F. Fang, S. Veprek and S. Z. Li, "Evaluation of the internal friction and elastic modulus of the superhard films," Materials Science and Engineering: A, Vol. 370, pp. 186-190 (2004)
M. J. Bamber, K. E. Cooke, A. B. Mann and B. Derby, "Accurate determination of Young's modulus and Poisson's ratio of thin films by a combination of acoustic microscopy and nanoindentation," Thin Solid Films, Vol. 398-399, pp. 299-305 (2001)
H. S. Cao, J. J. Hunsinger and O. Elkedim, "Determination of elastic modulus of nanocrystalline iron and titanium of acoustic microscopy," Scripta Materialia, Vol. 46, pp.55-60 (2005)
M. Doghmane, F. Hadjoub, A. Doghmane and Z. Hadjoub, "Approaches for evaluating Young's and shear moduli in terms of a single SAW velocity via the SAM technique," Materials Letters, Vol. 61, pp. 813-816 (2007)
A. Benbelghit, D. Boutassouna, B. Helifa and I. K. Lefkaier "Determination of the elastic properties of some coated materials by simulation of the analogue signal of the reflection acoustic microscope," NDT&E International, Vol. 39, pp. 76-81 (2006)
H. Akamatsu, T. Fujinami, Z. Horita and T. G. Langdon, "Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP," Scripta Materialia, Vol. 44, pp. 759-764 (2001)
E. A. El-Danaf, M. S. Soliman, A. A. Almajid and M. M. EI-Rayes, "Enhancement of mechanical properties and grain size refinement of commercial purity aluminum 1050 processed by ECAP," Materials Science and Engineering: A, Vol. 458, pp. 226-234 (2007)
K. Matoy, H. Schonherr, T. Detzel, T. Schoberl, R. Pippan, C. Motz and G. Dehm, "A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films, "Thin Solid Film, Vol. 518, pp. 247-256 (2009)
Y. Gaillard, E. Jimenez-Pique, F. Soldera, F. Mucklich and M. Anglada, "Quantification of hydrothermal degradation in zirconia by nanoindentation," Acta Materialia, Vol. 56, pp. 4206-4216 (2008)
S. Parthasarathi, B. R. Tittmann and R. J. Ianno, "Quantitative acoustic microscopy for characterization of the interface strength of diamond-like carbon thin films," Thin Solid Films, Vol. 300, pp. 42-50 (1997)
J. M. R. Weaver, M. G. Somekh, A. D. Briggs, S. D. Peck and C. IInett, "Applications of the scanning reflection acoustic microscope to the study of materials science," IEEE Transactions on Sonics Ultrasonics, Vol. SU-32, No. 2, pp. 302-312 (1985)
C. S. Kim, D. S. Cho and I. K. Park, "Ultrasonic characterization of residual stress in shot peened Al 7075 alloy using acoustic signature," Key Engineering Materials, Vol. 321-323, pp. 1475-1478 (2006)
L. Robert, N. Brunet, T. Flaherty, T. Randles, E. Matthaei-Schulz, H. Vetters, D. Rats and J. von Stebut, "Characterization of TiN and carbon-doped chromium thin film coatings by acoustic microscopy," Surface and Coatings Technology, Vol. 116-119, pp. 327-334 (1999)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.