수성 아크릴 점착제를 Butylacylate(BA)와 2-Ethylhexylacrylate(2-EHA)를 기본으로 하였고 약간의 경직성(rigidity)를 주기 위하여 methyl methacrylate(MMA)를 부가 단량체로 사용하였다. 여러 가지 기능성 기를 가지고 있는 기능성 단량체를 각각 1%, 2%, 3%를 사용하여 예비 ...
수성 아크릴 점착제를 Butylacylate(BA)와 2-Ethylhexylacrylate(2-EHA)를 기본으로 하였고 약간의 경직성(rigidity)를 주기 위하여 methyl methacrylate(MMA)를 부가 단량체로 사용하였다. 여러 가지 기능성 기를 가지고 있는 기능성 단량체를 각각 1%, 2%, 3%를 사용하여 예비 유화 중합(pre-emulsion polymerization)을 하였다. 중합의 여부는 IR-spectra를 이용해 확인하였고 공중합체들의 물리적 특성을 조사하고 점착제 3대 물성을 측정하였다. 특히 여기서 사용되어진 dimethyl-2-imidazlidon acrylate(C4) 나2-acrylamido-2-methyl-1-propanesulfonate(AMPS)는 주로 페인트 산업에서 젖음(wetting) 성질을 향상시키기 위해 사용하고 있다.^1 가교제를 넣지 않은 상태에서 코팅을 하여 점착제의 3물성을 측정하였으며, 그 결과 AMPS를 사용한 라텍스가 물성이 가장 좋았다. Acrylic acid와 C4를 포함하는 라텍스는 물성을 좋으나 응집력이 약해 점착력 시험 중에 피착체로의 전이가 일어나는 것을 볼 수 있었다. AMPS만이 전이가 되지 않았으며 점착제로서의 역할이 가장 양호한 것으로 나타났다. 그래서 전체 단량체 양에 대하여 AMPS 함량를 4~7%로 제조하여 다시 물성을 확인한 결과 함량이 많아질수록 접착력이 좋아졌으나 7w%이상에서는 점착력이 저하되는 것을 볼 수가 있었다. 나머지는 강도의 차이는 있지만 가교제를 도입하여 응집력을 향상시키게 되면 점착제로서 사용이 가능할 것이다.
수성 아크릴 점착제를 Butylacylate(BA)와 2-Ethylhexylacrylate(2-EHA)를 기본으로 하였고 약간의 경직성(rigidity)를 주기 위하여 methyl methacrylate(MMA)를 부가 단량체로 사용하였다. 여러 가지 기능성 기를 가지고 있는 기능성 단량체를 각각 1%, 2%, 3%를 사용하여 예비 유화 중합(pre-emulsion polymerization)을 하였다. 중합의 여부는 IR-spectra를 이용해 확인하였고 공중합체들의 물리적 특성을 조사하고 점착제 3대 물성을 측정하였다. 특히 여기서 사용되어진 dimethyl-2-imidazlidon acrylate(C4) 나2-acrylamido-2-methyl-1-propanesulfonate(AMPS)는 주로 페인트 산업에서 젖음(wetting) 성질을 향상시키기 위해 사용하고 있다.^1 가교제를 넣지 않은 상태에서 코팅을 하여 점착제의 3물성을 측정하였으며, 그 결과 AMPS를 사용한 라텍스가 물성이 가장 좋았다. Acrylic acid와 C4를 포함하는 라텍스는 물성을 좋으나 응집력이 약해 점착력 시험 중에 피착체로의 전이가 일어나는 것을 볼 수 있었다. AMPS만이 전이가 되지 않았으며 점착제로서의 역할이 가장 양호한 것으로 나타났다. 그래서 전체 단량체 양에 대하여 AMPS 함량를 4~7%로 제조하여 다시 물성을 확인한 결과 함량이 많아질수록 접착력이 좋아졌으나 7w%이상에서는 점착력이 저하되는 것을 볼 수가 있었다. 나머지는 강도의 차이는 있지만 가교제를 도입하여 응집력을 향상시키게 되면 점착제로서 사용이 가능할 것이다.
The polymreric latex was synthesized using butyl acrylate(BA), 2-ethylhexyl acrylate(EHA), methyl methacrylate(MMA) and each 1%, 2%, 3% of various functional monomers. The co-polymer was characterized by IR-spectra, DSC, viscometer, pH meter and light scattering particle size analyzer. The propertie...
The polymreric latex was synthesized using butyl acrylate(BA), 2-ethylhexyl acrylate(EHA), methyl methacrylate(MMA) and each 1%, 2%, 3% of various functional monomers. The co-polymer was characterized by IR-spectra, DSC, viscometer, pH meter and light scattering particle size analyzer. The properties as PSA were measured. The latex with AMPS was showed the best properties. Latex with acrylic acid and C4 had good peel strength, holding power, but it showed that they didn't separate from adherend cleanly. Then, the emulsions with AMPS 4%, 5%, 6%, 7% were prepared by pre-emulsified-feed type of thermo initiated radical polymerization. The latexes with 4~6% AMPS had good properties. However latexes with upper 7% AMPS showed that the properties of PSA decreased.
The polymreric latex was synthesized using butyl acrylate(BA), 2-ethylhexyl acrylate(EHA), methyl methacrylate(MMA) and each 1%, 2%, 3% of various functional monomers. The co-polymer was characterized by IR-spectra, DSC, viscometer, pH meter and light scattering particle size analyzer. The properties as PSA were measured. The latex with AMPS was showed the best properties. Latex with acrylic acid and C4 had good peel strength, holding power, but it showed that they didn't separate from adherend cleanly. Then, the emulsions with AMPS 4%, 5%, 6%, 7% were prepared by pre-emulsified-feed type of thermo initiated radical polymerization. The latexes with 4~6% AMPS had good properties. However latexes with upper 7% AMPS showed that the properties of PSA decreased.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.