본 연구는 담체로 나일론 섬유와 부식토를 이용하여 휘발성유기화합물 중 톨루엔의 제거특성과 처리효율을 검토함으로서 현장에 적용이 가능한가를 연구하였으며 기존의 부식토를 사용하여 처리효율과 제거특성을 비교함으로서 나일론 섬유의 장단점을 파악하였다. 분해균주로서 Pseudomonas oleovorans를 이용하여 톨루엔의 처리가능성을 조사하는 기초실험을 하였으며 유량변화, 수분, pH변화에 따른 톨루엔의 제거특성과 처리효율을 조사하였으며 결과는 아래와 같다. 압력손실 측정에서 수분량의 증가와 흐름속도에 따라 비례적으로 증가하며 Nylon 6 fiber보다 부식토의 압력손실이 크게 작용하는 것으로 조사되었으며 톨루엔의 분해 가능성 실험에서 1000ppm에서 900시간 실험한 결과 톨루엔의 평균 제거율과 CO_(2) 발생량은 41.2%와 6.94㎎/hr로 나타났다. 운전인자 결정에서 Toluene의 공기유량에 의한 제거효율은 5 1/min과 10 1/min에서 각각 Nylon 6 fiber가 84.1, 83.9%, 부식토가 89.2, 88.2%로 높게 나타났으며 두 유량 사이에 효율차가 크지 않음을 고려하면 경제성과 효율성을 비교하였을 때 10 1/min이 적절한 것으로 조사되었다. pH를 5.0∼9.0으로 변화를 주었을 경우 7.0일 경우 Nylon 6 fiber와 부식토의 처리 효율이 81.2%와 88.3% 로 나타남으로써 pH는 7.0일 때가 적절한 것으로 조사되었다. ...
본 연구는 담체로 나일론 섬유와 부식토를 이용하여 휘발성유기화합물 중 톨루엔의 제거특성과 처리효율을 검토함으로서 현장에 적용이 가능한가를 연구하였으며 기존의 부식토를 사용하여 처리효율과 제거특성을 비교함으로서 나일론 섬유의 장단점을 파악하였다. 분해균주로서 Pseudomonas oleovorans를 이용하여 톨루엔의 처리가능성을 조사하는 기초실험을 하였으며 유량변화, 수분, pH변화에 따른 톨루엔의 제거특성과 처리효율을 조사하였으며 결과는 아래와 같다. 압력손실 측정에서 수분량의 증가와 흐름속도에 따라 비례적으로 증가하며 Nylon 6 fiber보다 부식토의 압력손실이 크게 작용하는 것으로 조사되었으며 톨루엔의 분해 가능성 실험에서 1000ppm에서 900시간 실험한 결과 톨루엔의 평균 제거율과 CO_(2) 발생량은 41.2%와 6.94㎎/hr로 나타났다. 운전인자 결정에서 Toluene의 공기유량에 의한 제거효율은 5 1/min과 10 1/min에서 각각 Nylon 6 fiber가 84.1, 83.9%, 부식토가 89.2, 88.2%로 높게 나타났으며 두 유량 사이에 효율차가 크지 않음을 고려하면 경제성과 효율성을 비교하였을 때 10 1/min이 적절한 것으로 조사되었다. pH를 5.0∼9.0으로 변화를 주었을 경우 7.0일 경우 Nylon 6 fiber와 부식토의 처리 효율이 81.2%와 88.3% 로 나타남으로써 pH는 7.0일 때가 적절한 것으로 조사되었다. 함수율 변화에 따른 처리 효율 실험에서 함수율이 80% 이상일때 처리효율 또한 각각의 담체에서 80%이상 나와 함수율은 80%이상이 적절한 것으로 조사되었다. 부하량 변화 실험에서 Nylon 6 fiber와 부식토를 담체로 이용하여 Pseudomonas oleovorans를 접종한 생물막에 톨루엔을 처리할 경우 최대 허용 유입부하는 250ppm 이하가 적합한 것으로 사료된다 나일론섬유는 고농도의 톨루엔 처리가 가능하며 공기유량 10 ℓ/min, pH 7.0, 함수율 80%, 부하량 250ppm 이하일때 80% 이상의 처리 효율을 나타내었으며 압력손실, 막힘현상, 세정의 측면에서 기존의 부식토를 이용한 바이오필터에 비해 우수성을 나타내는 것으로 나타났다.
본 연구는 담체로 나일론 섬유와 부식토를 이용하여 휘발성유기화합물 중 톨루엔의 제거특성과 처리효율을 검토함으로서 현장에 적용이 가능한가를 연구하였으며 기존의 부식토를 사용하여 처리효율과 제거특성을 비교함으로서 나일론 섬유의 장단점을 파악하였다. 분해균주로서 Pseudomonas oleovorans를 이용하여 톨루엔의 처리가능성을 조사하는 기초실험을 하였으며 유량변화, 수분, pH변화에 따른 톨루엔의 제거특성과 처리효율을 조사하였으며 결과는 아래와 같다. 압력손실 측정에서 수분량의 증가와 흐름속도에 따라 비례적으로 증가하며 Nylon 6 fiber보다 부식토의 압력손실이 크게 작용하는 것으로 조사되었으며 톨루엔의 분해 가능성 실험에서 1000ppm에서 900시간 실험한 결과 톨루엔의 평균 제거율과 CO_(2) 발생량은 41.2%와 6.94㎎/hr로 나타났다. 운전인자 결정에서 Toluene의 공기유량에 의한 제거효율은 5 1/min과 10 1/min에서 각각 Nylon 6 fiber가 84.1, 83.9%, 부식토가 89.2, 88.2%로 높게 나타났으며 두 유량 사이에 효율차가 크지 않음을 고려하면 경제성과 효율성을 비교하였을 때 10 1/min이 적절한 것으로 조사되었다. pH를 5.0∼9.0으로 변화를 주었을 경우 7.0일 경우 Nylon 6 fiber와 부식토의 처리 효율이 81.2%와 88.3% 로 나타남으로써 pH는 7.0일 때가 적절한 것으로 조사되었다. 함수율 변화에 따른 처리 효율 실험에서 함수율이 80% 이상일때 처리효율 또한 각각의 담체에서 80%이상 나와 함수율은 80%이상이 적절한 것으로 조사되었다. 부하량 변화 실험에서 Nylon 6 fiber와 부식토를 담체로 이용하여 Pseudomonas oleovorans를 접종한 생물막에 톨루엔을 처리할 경우 최대 허용 유입부하는 250ppm 이하가 적합한 것으로 사료된다 나일론섬유는 고농도의 톨루엔 처리가 가능하며 공기유량 10 ℓ/min, pH 7.0, 함수율 80%, 부하량 250ppm 이하일때 80% 이상의 처리 효율을 나타내었으며 압력손실, 막힘현상, 세정의 측면에서 기존의 부식토를 이용한 바이오필터에 비해 우수성을 나타내는 것으로 나타났다.
This study was investigated the application and kinetics by the utilization biological treatment process to removal gaseous toluene that are highly recalcitrant to adsorption and biodegradation. Also, this study was use Nylon 6 fiber and humus soil as media and investigated merits and demerits of Ny...
This study was investigated the application and kinetics by the utilization biological treatment process to removal gaseous toluene that are highly recalcitrant to adsorption and biodegradation. Also, this study was use Nylon 6 fiber and humus soil as media and investigated merits and demerits of Nylon 6 fiber by comparison of removal quality and removal efficiency of Nylon 6 fiber and humus soil. Biofiltration was successfully applied to treat of volatile organic compounds (Toluene) from contaminated air stream. The variety of operating conditions were tested to evaluate important factor such as gas flux, pH. water content, etc. Dissolve microorganism was use Pseudomonas oleovorans and was evaluated for its value in removal of Toluene from waste air stream. In the loading rate (1,000ppm) and operation time(900hr), the average removal efficiencies of Toluene were 41.2%, and CO_(2) production rate were 6.94mg/hr. In the gas flux 10ℓ/min, removal efficiencies of Toluene were 83.9% in the Nylon 6 fiber, and were 88.2% in the humus soil. In the pH 7.0±0.2, the average removal efficiencies of Toluene were 81.2% in the Nylon 6 fiber, and were 88.3% in the humus soil. In the water content over 80%, the average removal efficiencies of Toluene were over 80% and removal capacity were suitable below 250ppm. Nylon 6 fiber was possible for toluene treatment of high concentration and that showed removal efficiency of over 80% at gas flux 10ℓ/min, pH 7.0±0.2, water content over 80%, removal capacity below 250ppm and that was superior in the pressure drop, washing, clogged state.
This study was investigated the application and kinetics by the utilization biological treatment process to removal gaseous toluene that are highly recalcitrant to adsorption and biodegradation. Also, this study was use Nylon 6 fiber and humus soil as media and investigated merits and demerits of Nylon 6 fiber by comparison of removal quality and removal efficiency of Nylon 6 fiber and humus soil. Biofiltration was successfully applied to treat of volatile organic compounds (Toluene) from contaminated air stream. The variety of operating conditions were tested to evaluate important factor such as gas flux, pH. water content, etc. Dissolve microorganism was use Pseudomonas oleovorans and was evaluated for its value in removal of Toluene from waste air stream. In the loading rate (1,000ppm) and operation time(900hr), the average removal efficiencies of Toluene were 41.2%, and CO_(2) production rate were 6.94mg/hr. In the gas flux 10ℓ/min, removal efficiencies of Toluene were 83.9% in the Nylon 6 fiber, and were 88.2% in the humus soil. In the pH 7.0±0.2, the average removal efficiencies of Toluene were 81.2% in the Nylon 6 fiber, and were 88.3% in the humus soil. In the water content over 80%, the average removal efficiencies of Toluene were over 80% and removal capacity were suitable below 250ppm. Nylon 6 fiber was possible for toluene treatment of high concentration and that showed removal efficiency of over 80% at gas flux 10ℓ/min, pH 7.0±0.2, water content over 80%, removal capacity below 250ppm and that was superior in the pressure drop, washing, clogged state.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.