본 연구에서는 유약의 염기성 성분별로 산화티탄(TiO_(2))의 효과와, 각 염기성분별로 4가지 발색산화물의 변화와 산화티탄(TiO_(2))의 발색특성을 알아보고, 유탁제의 영향관계를 알아보는데 그 목적을 두었다. 세가지 기본유약(석회유계, 석회마그네시아유계, 석회바륨유계)에 산화티탄(TiO_(2))을 첨가하여 소성 및 조합실험을 통해 유약의 색상 및 외관특성의 변화를 알아보고, 발색산화물인 산화철(Fe_(2)O_(3)), 산화코발트(CoO), 산화동(CuO), 산화크롬(Cr_(2)O_(3))을 첨가하였을 경우의 색상 및 외관특성변화의 변화를 각 기본유별로 알아보고, 유백제로 산화주석(SnO_(2))과 산화지르콘(ZrO_(2))을 첨가하여 만든 유약에 산화티탄(TiO_(2))의 첨가효과를 보고자 함이다 실험을 위하여 산화분위기(1250°전기가마)와 환원분위기(1240°가스가마)로 소성하였다. 연구결과는 다음과 같다. TiO_(2)는 결정유약에 중요한 성분이며 미세한 스펜(Sphene: ...
본 연구에서는 유약의 염기성 성분별로 산화티탄(TiO_(2))의 효과와, 각 염기성분별로 4가지 발색산화물의 변화와 산화티탄(TiO_(2))의 발색특성을 알아보고, 유탁제의 영향관계를 알아보는데 그 목적을 두었다. 세가지 기본유약(석회유계, 석회마그네시아유계, 석회바륨유계)에 산화티탄(TiO_(2))을 첨가하여 소성 및 조합실험을 통해 유약의 색상 및 외관특성의 변화를 알아보고, 발색산화물인 산화철(Fe_(2)O_(3)), 산화코발트(CoO), 산화동(CuO), 산화크롬(Cr_(2)O_(3))을 첨가하였을 경우의 색상 및 외관특성변화의 변화를 각 기본유별로 알아보고, 유백제로 산화주석(SnO_(2))과 산화지르콘(ZrO_(2))을 첨가하여 만든 유약에 산화티탄(TiO_(2))의 첨가효과를 보고자 함이다 실험을 위하여 산화분위기(1250°전기가마)와 환원분위기(1240°가스가마)로 소성하였다. 연구결과는 다음과 같다. TiO_(2)는 결정유약에 중요한 성분이며 미세한 스펜(Sphene: CaO, TiO_(2), SiO_(2))결정을 석출하여 현탁시킬 수 있기 때문에 유약을 유백시키는므로, 다량으로 유백에 넣으면 유탁제가 되며, 매트유약이나 결정유약에 큰 역할을 한다. 단독으로는 노르스름한 황색을 띠며. TiO_(2)의 함량이 많아질수록 색이 짙어지며.TiO_(2)첨가량 6%부터 유백영역을 이루는 것을 볼 수 있었다. 발색 산화물에 대해서는 색이 변화하며, 미세결정이 다량 분포되어 있었으며. TiO_(2) 6%~14%첨가에서 부터는 다량의 결정이 석출되어 유탁영역과 금속성표면이 나타남을 볼 수 있었다. 산화물의 함량과 TiO_(2)가 많을수록 그런 현상이 두드러짐이 보였다. , Fe_(2)O_(3)에 대해서는 철의 함량이 많을수록 천목유약에 가까운 검은색이 띤다. 그러나 TiO_(2)의 함량이 18%부터는 유탁성 매트영역으로 넘어가며 갈색이 나타난다. TiO_(2)의 첨가량이 놓아질수록 결정은 미세결정에서 다량의 결정으로 그 결정이 유탁성 매트유약으로 넘어감을 관찰할 수 있다. 특히 석회마그네시아유약에서는 노르스름한 색상에서 적갈색조로 변화하며 철의 함유량이 많을수록 황갈색조로 나타나며 다량의 결정이 석출된다., CuO에 대해서는 전체적으로 청록색을 띠며 ,연두색에서 짙은 녹색을 보이며 미세결정과 다량의 결정이 함량이 많을수록 나타나며. 전체적으로 잔잔한 미세결정으로 골고루 분포되었다. 환원 시에는 적색이 나타나면서 다양한 결정을 볼 수 있다. CoO에서는 청색에서 산화물의 함량과 TiO_(2)의 함량이 많아질수록 짙은 녹색으로 된다. 미세결정이 다량 분포되어있다. Cr_(2)O_(3)는 함량이 많을수록 녹색에서 짙은 갈색조로 나타남을 관찰할 수 있었다. 전체적으로 유탁영역을 이루며, 부드러운 느낌으로 나타남을 볼 수 있었다. 유백제 첨가 실험은 SnO_(2)나 ZrO_(2) 첨가 시 비슷하게 녹았으며, 소지와 유약의 융착성이 좋았다. SnO_(2)나 ZrO_(2)의 함량이 증가할수록 백색도가 뛰어나며, TiO_(2)의 함량이 증가할수록 TiO_(2)고유의 노르스름한 황색을 띠는 것을 알 수 있었으며, 3가지 유백제를 첨가 시, ZrO_(2)함량이 증가할수록 색상이 엷어지면서 탁하고 부드럽게 나타남이 관찰되었다. 위와 같은 실험을 통해 TiO_(2)는 기본유계별로 유약조합에 따라 다채롭게 변화를 줄 수 있는 유백제라 할 수 있다.
본 연구에서는 유약의 염기성 성분별로 산화티탄(TiO_(2))의 효과와, 각 염기성분별로 4가지 발색산화물의 변화와 산화티탄(TiO_(2))의 발색특성을 알아보고, 유탁제의 영향관계를 알아보는데 그 목적을 두었다. 세가지 기본유약(석회유계, 석회마그네시아유계, 석회바륨유계)에 산화티탄(TiO_(2))을 첨가하여 소성 및 조합실험을 통해 유약의 색상 및 외관특성의 변화를 알아보고, 발색산화물인 산화철(Fe_(2)O_(3)), 산화코발트(CoO), 산화동(CuO), 산화크롬(Cr_(2)O_(3))을 첨가하였을 경우의 색상 및 외관특성변화의 변화를 각 기본유별로 알아보고, 유백제로 산화주석(SnO_(2))과 산화지르콘(ZrO_(2))을 첨가하여 만든 유약에 산화티탄(TiO_(2))의 첨가효과를 보고자 함이다 실험을 위하여 산화분위기(1250°전기가마)와 환원분위기(1240°가스가마)로 소성하였다. 연구결과는 다음과 같다. TiO_(2)는 결정유약에 중요한 성분이며 미세한 스펜(Sphene: CaO, TiO_(2), SiO_(2))결정을 석출하여 현탁시킬 수 있기 때문에 유약을 유백시키는므로, 다량으로 유백에 넣으면 유탁제가 되며, 매트유약이나 결정유약에 큰 역할을 한다. 단독으로는 노르스름한 황색을 띠며. TiO_(2)의 함량이 많아질수록 색이 짙어지며.TiO_(2)첨가량 6%부터 유백영역을 이루는 것을 볼 수 있었다. 발색 산화물에 대해서는 색이 변화하며, 미세결정이 다량 분포되어 있었으며. TiO_(2) 6%~14%첨가에서 부터는 다량의 결정이 석출되어 유탁영역과 금속성표면이 나타남을 볼 수 있었다. 산화물의 함량과 TiO_(2)가 많을수록 그런 현상이 두드러짐이 보였다. , Fe_(2)O_(3)에 대해서는 철의 함량이 많을수록 천목유약에 가까운 검은색이 띤다. 그러나 TiO_(2)의 함량이 18%부터는 유탁성 매트영역으로 넘어가며 갈색이 나타난다. TiO_(2)의 첨가량이 놓아질수록 결정은 미세결정에서 다량의 결정으로 그 결정이 유탁성 매트유약으로 넘어감을 관찰할 수 있다. 특히 석회마그네시아유약에서는 노르스름한 색상에서 적갈색조로 변화하며 철의 함유량이 많을수록 황갈색조로 나타나며 다량의 결정이 석출된다., CuO에 대해서는 전체적으로 청록색을 띠며 ,연두색에서 짙은 녹색을 보이며 미세결정과 다량의 결정이 함량이 많을수록 나타나며. 전체적으로 잔잔한 미세결정으로 골고루 분포되었다. 환원 시에는 적색이 나타나면서 다양한 결정을 볼 수 있다. CoO에서는 청색에서 산화물의 함량과 TiO_(2)의 함량이 많아질수록 짙은 녹색으로 된다. 미세결정이 다량 분포되어있다. Cr_(2)O_(3)는 함량이 많을수록 녹색에서 짙은 갈색조로 나타남을 관찰할 수 있었다. 전체적으로 유탁영역을 이루며, 부드러운 느낌으로 나타남을 볼 수 있었다. 유백제 첨가 실험은 SnO_(2)나 ZrO_(2) 첨가 시 비슷하게 녹았으며, 소지와 유약의 융착성이 좋았다. SnO_(2)나 ZrO_(2)의 함량이 증가할수록 백색도가 뛰어나며, TiO_(2)의 함량이 증가할수록 TiO_(2)고유의 노르스름한 황색을 띠는 것을 알 수 있었으며, 3가지 유백제를 첨가 시, ZrO_(2)함량이 증가할수록 색상이 엷어지면서 탁하고 부드럽게 나타남이 관찰되었다. 위와 같은 실험을 통해 TiO_(2)는 기본유계별로 유약조합에 따라 다채롭게 변화를 줄 수 있는 유백제라 할 수 있다.
The aim of the current thesis is to research the effect of TiO_(2), the variation of the four different coloring oxides, the coloring features of TiO_(2) and the influence of the opacifiers. TiO_(2) is added to the three basic glazes (lime glaze, lime - magnesian glaze, lime-barium glaze) and fired....
The aim of the current thesis is to research the effect of TiO_(2), the variation of the four different coloring oxides, the coloring features of TiO_(2) and the influence of the opacifiers. TiO_(2) is added to the three basic glazes (lime glaze, lime - magnesian glaze, lime-barium glaze) and fired. The colors and the distinctive features of each glaze are observed through the experiments of firing and mixing. The current thesis examines how coloring differs when coloring oxides such as Fe_(2)O_(3), CuO, Cr_(2)O_(3), and CoO are added. It also examines the effects of TiO_(2) on the glazes including the opacifiers such as SnO_(2) and ZrO_(2). The firings are done with oxidation atmosphere at 1250℃ in the electric kiln and with reduction atmosphere at 1240℃ in the gas kiln. Below are the results of the experiments. TiO_(2) is a valuable element of crystalline glazes, and extracts the fine crystals of sphene (CaO, TiO_(2), SiO2) to make the glazes opaque. So TiO_(2) acts as an opacifier in opaque glazes, and when added in large amount, plays an important role in matte glazes and crystalline glazes. TiO_(2) alone is yellowish yellow, and the more quantity of TiO_(2) is contained, the darker the glaze coloring gets. From more than 6% of TiO_(2) the opaque area appears. In lime-barium glazes, opaqueness is conspicuous when 10% of TiO_(2) is added, and matte glazes appear from the 12% of TiO_(2) . As for coloring oxides, they change colors and extract the fine crystals. Crystals appear with 2%~10% of TiO_(2), and the opaque area and the metallic area appear with 14% of TiO_(2). the more amount of coloring oxides and TiO_(2) is contained, the more conspicuous their effects are. As for Fe_(2)O_(3), the more Fe_(2)O_(3), is contained, the darker the glaze color becomes like Tenmok. But from 18% of TiO_(2), the glaze color changes into opaque area with brown tone. As the amount of TiO_(2), increases, fine crystals change into opaque matte. In lime-magnesian glazes, as the amount of Fe_(2)O_(3), increases, iron glaze of yellowish brown appears and large amount of crystals are extracted. As for CuO, it makes glazes look bluish green in general ranging from light green to dark green. The more fine crystals appear as the amount of CuO increases, which are evenly distributed. When fired in reduction atmosphere, red colors and various crystals are observed. As for CoO, the glaze color changes from blue to dark green as the amount of coloring oxides and TiO_(2) increases. And also a great deal of fine crystals are distributed. As the amount of Cr_(2)O_(3), increases, colors varies from green to dark brown. As for the coloring features, we can have the ornamental effect as well as distinctive colors by adding coloring substance and TiO_(2) We can see diverse areas in lime glazes, the opaque area with soft feeling is seen generally in lime-magnesian glazes, and the transparent area is conspicuously observed and the matte area is clear when more than 14% of TiO_(2) is added. In the experiments of adding opacifiers, SnO_(2) and ZrO_(2), the glazes melt to the similar degree. Both SnO_(2) and ZrO_(2) make the glazes land firmly on the clay body even in unmelted areas. The whiteness of glaze improves as the amount of SnO_(2) and ZrO_(2) increases, and the yellowish yellow clearly appears as the amount of TiO_(2) increases, and the glaze color gets lighter and more opaque when 5% of ZrO_(2) and three kinds of opacifiers are added. With the research and experiments above, we've found that TiO_(2) is an opacifier which contributes to the countless variations depending on divers combinations of basic glazes.
The aim of the current thesis is to research the effect of TiO_(2), the variation of the four different coloring oxides, the coloring features of TiO_(2) and the influence of the opacifiers. TiO_(2) is added to the three basic glazes (lime glaze, lime - magnesian glaze, lime-barium glaze) and fired. The colors and the distinctive features of each glaze are observed through the experiments of firing and mixing. The current thesis examines how coloring differs when coloring oxides such as Fe_(2)O_(3), CuO, Cr_(2)O_(3), and CoO are added. It also examines the effects of TiO_(2) on the glazes including the opacifiers such as SnO_(2) and ZrO_(2). The firings are done with oxidation atmosphere at 1250℃ in the electric kiln and with reduction atmosphere at 1240℃ in the gas kiln. Below are the results of the experiments. TiO_(2) is a valuable element of crystalline glazes, and extracts the fine crystals of sphene (CaO, TiO_(2), SiO2) to make the glazes opaque. So TiO_(2) acts as an opacifier in opaque glazes, and when added in large amount, plays an important role in matte glazes and crystalline glazes. TiO_(2) alone is yellowish yellow, and the more quantity of TiO_(2) is contained, the darker the glaze coloring gets. From more than 6% of TiO_(2) the opaque area appears. In lime-barium glazes, opaqueness is conspicuous when 10% of TiO_(2) is added, and matte glazes appear from the 12% of TiO_(2) . As for coloring oxides, they change colors and extract the fine crystals. Crystals appear with 2%~10% of TiO_(2), and the opaque area and the metallic area appear with 14% of TiO_(2). the more amount of coloring oxides and TiO_(2) is contained, the more conspicuous their effects are. As for Fe_(2)O_(3), the more Fe_(2)O_(3), is contained, the darker the glaze color becomes like Tenmok. But from 18% of TiO_(2), the glaze color changes into opaque area with brown tone. As the amount of TiO_(2), increases, fine crystals change into opaque matte. In lime-magnesian glazes, as the amount of Fe_(2)O_(3), increases, iron glaze of yellowish brown appears and large amount of crystals are extracted. As for CuO, it makes glazes look bluish green in general ranging from light green to dark green. The more fine crystals appear as the amount of CuO increases, which are evenly distributed. When fired in reduction atmosphere, red colors and various crystals are observed. As for CoO, the glaze color changes from blue to dark green as the amount of coloring oxides and TiO_(2) increases. And also a great deal of fine crystals are distributed. As the amount of Cr_(2)O_(3), increases, colors varies from green to dark brown. As for the coloring features, we can have the ornamental effect as well as distinctive colors by adding coloring substance and TiO_(2) We can see diverse areas in lime glazes, the opaque area with soft feeling is seen generally in lime-magnesian glazes, and the transparent area is conspicuously observed and the matte area is clear when more than 14% of TiO_(2) is added. In the experiments of adding opacifiers, SnO_(2) and ZrO_(2), the glazes melt to the similar degree. Both SnO_(2) and ZrO_(2) make the glazes land firmly on the clay body even in unmelted areas. The whiteness of glaze improves as the amount of SnO_(2) and ZrO_(2) increases, and the yellowish yellow clearly appears as the amount of TiO_(2) increases, and the glaze color gets lighter and more opaque when 5% of ZrO_(2) and three kinds of opacifiers are added. With the research and experiments above, we've found that TiO_(2) is an opacifier which contributes to the countless variations depending on divers combinations of basic glazes.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.